Sharif Digital Repository

Although phase change memory with multi-bit storage capability (known as MLC PCM) offers a good combination of high bit-density and non-volatility, its performance is severely impacted by the increased read/write latency. Regarding read operation, access latency increases almost linearly with respect to cell density (the number of bits stored in a cell). Since reads are latency critical, they can seriously impact system performance. This paper alleviates the problem of slow reads in the MLC PCM by exploiting a fundamental property of MLC devices: the Most-Significant Bit (MSB) of MLC cells can be read as fast as SLC cells, while reading the Least-Significant Bits (LSBs) is slower. We propose... 

Phase Change Memory (PCM) devices are one of the known promising technologies to take the place of DRAM devices with the aim of overcoming the obstacles of reducing feature size and stopping ever growing amounts of leakage power. In exchange for providing high capacity, high density, and nonvolatility, PCM Multilevel Cells (MLCs) impose high write energy and long latency. Many techniques have been proposed to resolve these side effects. However, read performance issues are usually left behind the great importance of write latency, energy, and lifetime. In this article, we focus on read performance and improve the critical path latency of the main memory system. To this end, we exploit... 

A single storey full-scale unreinforced brick masonry building with confined walls was designed based on Iranian building code and constructed on the shaking table facility of EERC of Sharif University of Technology. The model consisted of plain brick masonry walls confined with concrete tie columns and steel bond beams and had a typical jack-arch roof system. Wall panels included openings of different dimensions making it possible to investigate the effects of shape, geometry and location of openings. The model was subjected to several seismic excitations, consisting of scaled records of Bam 2003, Tabas 1978 and Elcentro 1940 earthquakes as well as a harmonic acceleration with a gradually... 

Named Data Networking (NDN) is a new information-centric networking architecture in which data or content is identified by a unique name and saved pieces of the content are used in the cache of routers. Certainly, routing is one of the major challenges in these networks. In NDN, to achieve the required data for users, interest messages containing the names of data are sent. Because the source and destination addresses are not included in this package, routers forward them using the names that carried in packages. This forward will continue until the interest package is served. In this paper, we propose a routing algorithm for NDN. The purpose of this protocol is to choose a path with the... 

Named data networking (NDN) is a new information-centric networking architecture in which data or content is identified by a unique name and saved pieces of the content are used in the cache of routers. Certainly, routing is one of the major challenges in these networks. In NDN, to achieve the required data for users, interest messages containing the names of data are sent. Because the source and destination addresses are not included in this package, routers forward them using the names that carried in packages. This forward will continue until the interest package is served. In this paper, we propose a routing algorithm for NDN. The purpose of this protocol is to choose a path with the... 

This research is aimed at geometric analysis of parabolic trough solar collector (PTC) in different sizes of the main components of the system. The rate of the Local Concentration Ratio (LCR) on the receiver tube and optical efficiency are two main features in geometric optimization of the parabolic trough solar collectors. In this work, parabolic trough solar collector was optimized for different sizes with three design variables: the receiver diameter, the collector aperture width and the rim angle. The method used in this research was the Monte Carlo Method (MCM) in MATLAB. The optical and geometric modeling was developed for coding in MATLAB. For the case study, a parabolic trough solar... 

The exergoeconomic analysis is a powerful tool to study an energy system and provide rational decision-making for it. This paper is aimed at exergoeconomic optimization and sensitivity analysis evaluation of the results of a commercial parabolic trough collector (PTC). First, an analysis of optical, thermal, exergy, and economic equations of the PTC system is presented. Then, the objective function and variables are optimized through MATLAB software using the hybrid algorithm code. The objective function as the exergy loss rate is a combination of exergy loss and system cost. The evaluation of the results has been carried out considering the radiation intensity in different months of the... 

Energy storage and supply in solar thermal collector systems rely heavily on phase change materials (PCM). It is vital to establish the appropriate values for energy discharge time (tPCM) and net amount of stored energy (Qnet) within the PCMs in order to increase the efficiency of solar thermal collectors. For this study, we implemented a multi-objective evolutionary algorithm based on decomposition (MOEA/D) for the optimization process using the MATLAB simulator software. The simulation findings show that, under ideal circumstances where tPCM is large and Qnet is low, these two goal functions are inversely connected to one another. According to an analysis of how input parameters affect the... 

Four 5-, 10-, 20- and 30-story moment frames, representing low-, mid-, and two high-rise structures, were subjected to a great number of idealized directivity pulses. The amplitudes and periods of pulses vary from 0.02 g to 1.0 g and 0.5 to 12 sec, respectively. Over 1400 nonlinear dynamic analyses of low- to high-rise moment frames were performed which were feasible through using modified fish-bone model. The distribution of interstory drift along the height was studied and two applied contours were proposed: (i) the maximum interstory drift contour, and (ii) the critical story contour. These contours were demonstrated versus the ratio of natural period of the structure to the pulse period... 

In this article singular points of a parallel manipulator are obtained based on a novel geometrical method. Here we introduce the constrained plain method (CPM) and some of its application in parallel mechanism. Given the definition of constraint plane (CP) and infinite constraint plane (ICP) the dependency conditions of constraints is achieved with the use of a new theorem based on the Ceva geometrical theorem. The direction of angular velocity of a body is achieved by having three ICPs with the use of another theorem. Finally, with the use of the above two novel theorems singularities of the 3UPF_PU mechanism are obtained. It should be emphasized that this method is completely geometrical,... 

An analytical model is proposed to study the effect of particle size on melting enthalpy and entropy of metallic nanoparticles (NPs). The Mott's and Regel's equations for melting entropy in the combination of core average coordination number (CAC) and surface average coordination number (SAC) of freestanding NPs are considered. Clusters of icosahedral (IC), body centered cubic (BCC), and body centered tetragonal (BCT) structure without any vacancies and defects are modeled. Using the variable coordination number made this model to be in good agreement with experimental and molecular dynamic (MD) results of different crystal structures. The model predicts melting entropy and enthalpy of... 

Grinding is widely used for manufacturing of components that require fine surface finish and good dimensional accuracy. In this study a thermo-mechanical finite element analysis is conducted to find out how grinding parameters can affect temperature and residual stress distribution in the workpiece. Results of parametric study presented in this work indicate, by carefully selecting the grinding parameters, minimum thermal and mechanical damage can be achieved. Higher workpiece velocities produce higher surface residual stress. By increasing depths of cut, depth of tensile residual stresses increases. Convection heat coefficient does not have any considerable effect on surface residual stress... 

Adaptive Noise Cancellation (ANC) is a well-known technique for background noise reduction in automobile and vehicular environments. The noise fields in automobile and other vehicle interior obey the diffuse noise field model closely. On the other hand, the ANC does not provide sufficient noise reduction in the diffuse noise fields. In this paper, a new multistage post-filter is designed for ANC as a solution to diffuse noise conditions. The designed post-filter is a single channel Linear Prediction (LP) based speech enhancement system. The LP is performed by an adaptive lattice filter and attempts to extract speech components by using intermediate ANC signals. The post-filter has no... 

Self-Compacting Concrete (SCC) is a unique type of concrete that can flow and fill spaces without the need for vibrating compaction, resulting in a dense and uniform material. This article focuses on estimating the compressive strength of SCC utilizing Artificial Neural Networks. Specifically, the study employs multilayer perceptrons with back-propagation learning algorithms, which are commonly used in various problem-solving scenarios. The study covers essential components such as structure, algorithm, data preprocessing, over-fitting prevention, and sensitivity analysis in MLPs. The input variables considered in the research include water, fine aggregate, super-plasticizer, fly ash, coarse... 

Seismic retrofits can significantly reduce the vulnerability of masonry buildings. Multiple seismic retrofit alternatives are often available for a given building. Estimating the cost of each candidate action is essential to selecting and implementing the appropriate seismic retrofit initiatives. This research harnesses the capabilities of various regression models for cost estimation. A dataset from 167 retrofit projects for masonry school buildings was used to develop models. Three main retrofit actions were taken into consideration: shotcrete, steel belt and fiber-reinforced polymer. Various regression methods, including multiple linear regression, ridge regression, lasso regression, and... 

Shot peening is widely used to improve the fretting fatigue strength of critical surfaces. Fretting fatigue occurs in contacting parts that are subjected to fluctuating loads and sliding movements at the same time. This paper presents a sequential finite element simulation to investigate the shot peening effects on normal stress, shear stress, bulk stress and slip amplitude, which are considered to be the controlling parameters of fretting damage. The results demonstrated that among the modifications related to shot peening, compressive residual stress has a dominant effect on the fretting parameters  

One-dimensional (1D) MgO structures were successfully synthesized via carbothermic reduction of mechanically activated mixture of MgO and graphite. Mechanical activation of source materials before carbothermic reduction can substantially enhance the formation of MgO products at a temperature (1000 °C) relatively lower than that required in previous approaches (≥1200 °C). However, the morphology of MgO formed is dependent on the degree of mechanical activation and the condition of the subsequent carbothermic reduction. Two distinctive morphologies were found for MgO products synthesized using our method: single crystalline nanorods with rectangular cross-sections whose diameters range from 50... 

Attitude and vibration control of a general form of flexible satellites is addressed in this paper. Partial differential dynamic equations are derived considering new details such as multi sectioned solar panels and elastic connections between main hub and solar panels. Boundary control approach is adopted to eliminate simplification errors of discrete models, using just one actuator in the hub. Asymptotic stability of attitude dynamics is proved for a group of boundary controllers and necessary conditions for asymptotic stability of vibrations are discussed. Being independent of modeling accuracy and using easily measurable feedbacks are among advantages of the proposed class of... 

Characterization and calcination behavior of a low-grade manganese ore, as a part of Mn ferroalloys production, was studied by XRF, ex-situ XRD, in-situ XRD, and SEM-EDS techniques. Calcination experiments were carried out at and up to 900 °C (1173 K) in air and argon atmospheres. The samples were in particles and powder forms. The results indicated that both quartz and calcite phases in the ore exhibit a bimodal spatial distribution; as relatively large regions and finely distributed in the Mn- and Fe-containing phases. By Rietveld analysis of the in-situ XRD data, the reactions occurring upon heating during the calcination process were deduced. Thermal decomposition and reactive diffusion...