Sharif Digital Repository

The secretary problems are of types of the optimal stopping theory problems and are also distinguished as well known problems in applied probability, statistics and decision theory fields. The importance of these kinds of problems defines many new conditions which have been discussed till now. The significance of these types of problems in social issues causes to define many conditions which are vastly discussed. In this paper, a new condition of this problem is considered. These conditions which have been performed using a real time method are based on Multi-Agent Systems techniques. In this paper, after evaluating this method, the resulted answers are examined using Multi-Agent system... 

In this paper, a formal transition system model is presented called Linear Temporal Public Announcement Logic (LTPAL) to extract knowledge in a classification process. The model combines Public Announcement Logic (PAL) and Linear Temporal Logic (LTL). For this purpose, first, an epistemic logic model is created to capture information gathered by classifiers in single-framed data input. Next, using LTL, classifiers are considered for data stream inputs. Then, a verification method is proposed for such data streams. Finally, we formalize natural language properties in LTPAL with a video-stream object detection sample. © 2023, The Author(s) under exclusive licence to Iranian Mathematical... 

Recent advances in wireless sensor network (WSN) technology are enabling the deployment of large-scale and collaborative sensor networks. WSNs face several challenges such as security, localisation, and energy consumption. To resolve these issues, evolutionary algorithms can be helpful. The core of every evolutionary algorithm is its fitness function. The drawbacks of fitness functions used in the literature will be investigated and some solutions will be suggested. The simulation results clearly show the improvement due to suggested solutions. © The Institution of Engineering and Technology 2017  

Demand forecasting plays an important role as a decision support tool in power system management, especially in smart grid and liberalized power market. In this paper, a demand forecasting method is presented by using support vector regression (SVR). The proposed method is applied to practical hourly data of the Greater Tehran Electricity Distribution Company. The SVR parameters are selected by using a grid optimization process and an investigation on different kernel functions. Moreover, correlation analysis is used to find exogenous variables. Acceptable accuracy of load prediction is shown by comparing the result of SVR model to that of the artificial neural networks and the actual data,... 

The catalytic wet peroxide oxidation (CWPO) of phenol with activated carbon (AC) as the catalyst has been successfully tested in a novel type of two-impinging-jets reactor (TIJR). The TIJR is characterized by a high-intensity reaction chamber, which is separated by a perforated plate from other parts of the reactor. The perforated plate was used as a filter to keep the catalyst particles within the reaction chamber. The influences of various operating and design parameters such as jet Reynolds number, feed flow rate, internozzle distance, and the jet diameter on the performance capability of the TIJR were investigated. As a result of the impinging process, turbulence, complex trajectory of... 

The aim of this research was to synthesize barium sulfate nanoparticles using a spinning disk reactor. Barium sulfate was produced by continuously pumping two aqueous solutions of BaCl2 and Na2SO 4, respectively, into the chamber of spinning disk reactor, where a liquid-liquid reaction took place to form BaSO4. The influences of various operating and design parameters such as the initial supersaturation, disk rotation speed, free ion ratio, and the disk diameter on the size of barium sulfate nanoparticles were carefully investigated. By varying the supersaturation and disk rotation speed, a broad range of particle size ranging from micrometer sizes down to nanoparticles smaller than 100 nm... 

Novel type of two-impinging-jets loop reactor (TIJLR) has been proposed and tested successfully for the solid-liquid catalytic reactions. The TIJLR was tested using the catalytic reaction of isomerization of D-glucose to D-fructose by immobilized glucose isomerase catalyst as a typical model system of solid-liquid catalytic reactions. The TIJLR is characterized by a high intensity reaction chamber, which is separated by a perforated plate from other parts of the reactor. The perforated plate was used as a filter to keep the catalyst particles within the reaction chamber. A compartment model with two adjustable parameters was considered to describe the pattern of flow within the reaction... 

Liquid-liquid equilibrium (LLE) data, density, viscosity, and interfacial tension for the ternary system of toluene-acetic acid-water were measured at 298.15 K and 101.7 kPa. The Othmer-Tobias and the Hand correlations were used to check the reliability of the experimental tie-lines. Moreover, the distribution coefficient and the separation factor were explored. It was found from the experimental results that a maximum separation factor value happens at an acetic acid mass fraction of 0.02 in the organic phase. Density, viscosity, and interfacial tension were correlated using the appropriate correlations such that the predicted results have excellent agreement with the experimental data. The... 

In this article, the problem of combined forced and natural convection in a vertical porous channel for both regular fluids and nanofluids has been solved by perturbation and numerical methods, taking into account the influences of viscous heating and inertial force. In this regard, various types of viscous dissipation models, including the Darcy model, the power of drag force model, and the clear fluid compatible model, were considered to account for viscous heating. In addition, the mass flux of nanoparticles was also considered in terms of Brownian and thermophoresis mechanisms. The velocity and temperature distributions of both the regular fluid and nanofluid and the Nusselt number... 

In this article, the transesterification of waste cooking oil (WCO) to biodiesel fuel (BDF) has been studied using KOH loaded on millimetric γ-Al2O3 particles in a novel type of two-impinging-jets reactor (TIJR). The effects of various parameters such as KOH loading (wt %), catalyst loading, and methanol-to-oil molar ratio on the BDF yield were studied. The catalyst particles with a KOH loading of 25 wt % at appropriate reaction conditions (i.e., catalyst loading = 4 wt % and methanol-to-oil molar ratio = 15:1) and at 65 °C were used in the TIJR. The influences of various operating and design parameters such as jet Reynolds number value, feed flow rate, jet diameter, and the internozzle... 

Mixed-convection flow of nanofluids inside a vertical rectangular channel partially filled with open-cell metal foam and subject to a constant wall-heat flux was investigated experimentally and numerically. Al2O3-water nanofluids with different concentrations were prepared and their stability was examined using UV-Vis spectroscopy. Dynamic light scattering method was used to determine particle size distribution of the nanofluid feedstock. The outlet temperature and pressure drop were measured for different nanofluid flow rates (i.e., Reynolds number values). In the numerical section, a two-dimensional volume-averaged form of the governing equations was used. The velocity and temperature... 

In this article, transient hydrodynamic and heat-transfer behavior of Newtonian fluid flow in vertical parallel-plate channels partially filled with a porous medium has been investigated numerically. In this regard, the influences of macroscopic local inertial term and the viscous heating due to the viscous dissipation were taken into account in the momentum equations of porous region and the thermal energy equations, respectively. Moreover, Forchheimer-Brinkman extended Darcy model was used to model fluid flow in the porous region. In addition, an analytical solution was obtained in the case of negligible Brinkman and Forchheimer number values at the steady-state conditions. The predicted... 

The mass-transfer characteristics of a new type of two-impinging-streams reactor (TISR) was studied by means of sodium sulfite solution as the liquid phase and air as the gas phase, in the presence and absence of various types of surface-active agents (SAAs). The influences of anionic, cationic, and nonionic SAAs on the specific interfacial area and overall volumetric mass-transfer coefficient obtained in the TISR were investigated. It was found that the presence of a little amount of the above-mentioned contaminants increases the specific interfacial area and decreases the overall volumetric mass-transfer coefficient. On the basis of the experimental results obtained for various types of... 

In this article, mixed-convective heat transfer of nanofluids in a vertical channel partially filled with highly porous medium was studied. In the porous region, the Brinkman-Forchheimer extended Darcy model was used to describe the fluid flow pattern. Different viscous dissipation models were also applied to account for viscous heating. At the porous medium-fluid interface, interfacial coupling conditions for the fluid velocity and temperature were used to derive the analytical solution using a two-parameter perturbation method. The model used for the nanofluids incorporates the effects of Brownian motion and thermophoresis. With constant wall temperature, velocity and temperature profiles... 

In this article, 3D modeling and simulation of bubbling fluidized beds has been conducted using various drag models, and the model predictions were validated against reported experimental data and 2D simulation results. In this regard, different drag models reported in the literature including Gidaspow, Syamlal-O'Brien, Hill-Koch-Ladd, and Wen-Yu were applied. A standard Two-Fluid Model (TFM) closed by the Kinetic Theory of Granular Flows (KTGF) was used to simulate bubbling gas-solid fluidized beds. Excellent agreements between the simulation results and experimental data, concerning bed expansion ratio, gas volume fraction, and time-averaged particles velocity, were found over a wide range... 

In this article, a standard 2D Two-Fluid Model (TFM) closed by the kinetic theory of granular flow (KTGF) has been applied to simulate the behavior of tapered-in and tapered-out fluidized bed reactors. In this regard, two types of chemical reactions with gas volume reduction and increase were considered to investigate the effects of initial static bed height on the fractional conversion and bed pressure drop. To validate the CFD model predictions, the results of hydrodynamic simulations concerning bed pressure drop and bed expansion ratio were compared against experimental data reported in the literature and excellent agreement was observed. The obtained simulation results clearly indicate... 

In this article, the effects of nonuniform magnetic fields on the hydrodynamics and heat transfer from a heated sphere to its surrounding ferrofluid flow have been investigated. Kelvin body forces originate from the nonuniformity of the applied magnetic field and can generate the vortices behind the sphere leading to a considerable change in the velocity and temperature fields. The applied magnetic field disturbs the thermal boundary layer and decreases heat-transfer resistance, leading to a significant enhancement in the heat-transfer coefficient. Variations of the local and average Nusselt number value (Nu), separation angle, recirculation length, and drag coefficient were considered to... 

This article presents a simulation study of tapered-in and tapered-out fluidized bed reactors to investigate the influences of apex angle on the fractional conversion and the pressure drop of the fluidized beds in the presence of two types of chemical reaction with gas volume increase and reduction. The 2D behavior of tapered-in and -out fluidized beds was also compared with a columnar one from fractional conversion and bed pressure drop point of views. To validate the simulation results, the numerical predictions for the expansion ratio and the pressure drop of a tapered fluidized bed were compared with experimental data and good agreement was observed. The obtained simulation results... 

In this article, a confined-impinging-jets reactor (CIJR) was designed and tested successfully for the synthesis of calcium carbonate nanoparticles using the reactive precipitation method. The proposed CIJR comprised of two opposed nozzles placed in a cylindrical chamber. Effects of various operating and design parameters such as supersaturation, feed flow rate, nozzle diameter, reactor diameter, operating temperature, and surface-active agents on the mean particle size, particle size distribution, and the polymorphs of calcium carbonate nanoparticles were investigated carefully. By changing the supersaturation, reactor diameter, jets velocity, operating temperature, and the nozzle diameter,... 

In this article, the influences of ferrofluid and magnetic field on the reactive absorption in packed-bed contactors have been investigated. Because of importance of carbon dioxide emission as a global concern, absorption of carbon dioxide was chosen to investigate these effects. In this regard, multitube approach was applied to model the contactor. The simulation results were validated against experimental data reported in the literature in the absence of nanoparticles and magnetic field and good agreement was obtained. Moreover, influences of various operating conditions on the contactor performance were investigated. It was found that for 3.4 vol.% of magnetic nanoparticles (MNPs), the...