Sharif Digital Repository

By reducing the exploration of new oil reservoirs, enhanced oil recovery from previous oil reservoirs is a solution to supply energy demand. In order to develop the production, various technologies and methods have been proposed such as steaming, direct heating, flooding by nano-fluid, chemical injection, polymer injection and etc. In the present study, nanofluid flooding has been attempted on a rock reservoir with incomplete cone geometry and its performance has been evaluated on oil recovery. The porous media is considered heterogeneous in simulation in accordance with oil reservoirs. The heterogeneous geometry considered in this study is incomplete cone that is heterogeneous in a random... 

In the initial recovery stage, only 5 to 15% of hydrocarbons can be extracted from oil reservoirs, so it is necessary to supply energy from an external reservoir or to use advanced solutions to increase oil recovery. By using secondary recovery method and flooding, greater amount of oil can be extracted. In this study, a new procedure of flooding using nanofluid was simulated. The nanofluid and source rock were modeled as a single phase and heterogeneous porous media, respectively. The geometry was considered as a two-dimensional rectangular area. Two phase Darcy equations and mass transfer equations were utilized to simulate this process. Moreover, the effects of different volume fractions... 

In this study, flooding of oil reservoir by implementing Nanoscale colloidal solutions as a working fluid is simulated. All oil reservoirs are heterogeneous porous media; therefore, in this investigation for more accurate prediction of the problem, the porous media is considered heterogeneous. The governing equations of this problem are solved by finite element method (FEM). Moreover two-phase equations of Darcy and mass transfer equations are used. In this paper, the effect of temperature and volume fractions of nanoparticles on the rate of oil recovery is investigated. The SiO2, Al2O3, and CuO nanoparticles are used in the enhanced oil recovery (EOR) process. Also, in order to solve the... 

In the present study, we try to numerically simulate the nanofluid flooding method, which is one of the newest methods in this field. For this purpose, the nanofluid is considered as a single phase fluid that enters the porous petroleum reservoir containing oil. Since all porous petroleum reservoirs are heterogeneous, the porous grid is also considered heterogeneous and is solved using the finite element numerical method. The geometry considered in this study is a two-dimensional anticline medium that is heterogeneous. In this study, the effect of using different volume fractions of nanoparticles in nanofluid is studied. Capillary pressure or diffusion are considered in simulation and their... 

This paper has investigated the performance of a linear, 6H-SiC high power photoconductive semiconductor switch. A three-dimensional device modeling with SILVACO ATLAS tools was used to model the optically initiated 6H-SiC switch. The 6H-SiC PCSS device is designed in a rear-illuminated, radial switch structure. The material properties of vanadium compensated 6H-SiC PSCC have been analyzed for breakdown, photocurrent profile such as rise and fall time in terms of their applications as a photoconductive switch at high bias conditions. This structure and also new type of illumination extends the blocking voltage by reducing the peak electric field near electrodes. In this presentation the... 

In this paper characteristics of a linear, 6H-SiC photoconductive semiconductor switch are presented. The vanadium-doped semi-insulated 6H-SiC PCSS device is designed in a back-triggered, radial switch structure. For this purpose, three-dimensional (3D) device modeling tool was used to model and test the optically initiated 6H-SiC switch. Dark I-V characteristic results show that newly proposed rear-illuminated radial switch structure extends the blocking voltage by reducing the peak electric fields near electrodes. Also this radial structure has higher dark resistance as compared to the previous 6H-SiC PCSS experimental results. The ON-state characteristics of vanadium compensated 6H-SiC... 

In this paper, the effect of radial structure on the performance of a linear-lateral GaAs high power photoconductive semiconductor switch (PCSS) is investigated. For this purpose a three-dimensional device modeling is used to model the optically initiated GaAs switch. In this simulation a p-type device with carbon as shallow acceptor is compensated by deep donor EL2 level as a trap level. The PCSS device is designed in a back-triggered, radially symmetric switch structure which extends the blocking voltage by reducing the peak electric field near the electrodes. Device modeling was performed and the effect of different trap concentrations on dark I-V characteristics has been investigated. In... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance...