Sharif Digital Repository

Analysis of an extensive air shower (EAS) detected by surface arrays highly depends on the determination of core locations. Here we present a new method to find the core location of an EAS that, unlike the common methods, does not depend on the lateral distribution function and uses arrival times of secondary particles. This method improves the accuracy of finding the core location of a low-energy EAS in the internal parts of an array, in comparison with common methods  

The most important goal of studying an extensive air shower is to find the energy, mass and arrival direction of its primary cosmic ray. In order to find these parameters, the core position and arrival direction of the shower should be determined. In this paper, a new method for finding core location has been introduced that utilizes trigger time information of particle detectors. We have also developed a simple technique to reconstruct the arrival direction. Our method is not based upon density-sensitive detectors which are sensitive to the number of crossing particles and is also independent of lateral distribution models. This model has been developed and examined by the analysis of... 

An assessment study of two different shunt FACTS devices for compensating disturbances due to voltage variation in power systems is presented in this paper. Namely, Static Compensator (STATCOM) and Static Var Compensator (SVC) are Considered in this study. Eigen Value analysis and nonlinear time domain simulations for starting motor, motor in load varying state and short circuit on motor terminals show that STATCOM DC Voltage regulation has a better performance Compared to that of SVC. The result that will be presented in the paper will prove the superiorly of STATCOM over SVC in increasing motor speeding up and improving system voltage profile particularly at starting. © 2005 IEEE  

Clay liners are widely used as porous membrane barriers to control solute transport and to prevent the leakage of leachate both in horizontal and vertical flow scenarios, such as the isolated base and ramps of sanitary landfills. Despite the primary importance of saturated hydraulic conductivity in a reliable simulation of fluid flow through clay barriers, there is no model to predict hydraulic conductivity of clayey soils permeated with saline aqueous solutions because most of the current models were developed for pure water. Therefore, the main motivation behind this study is to derive semi-empirical models for simulating the hydraulic conductivity of clayey soils in the presence of... 

This article describes the synthesis and swelling properties of a superabsorbing hydrogel composite based on collagen. The composite have been prepared via graft copolymerization of acrylic acid (AA) in the presence of kaolin powder using methylenebisacrylamide (MBA) as a crosslinking agent and ammonium persulfate (APS) as an initiator. The certain variables of the graft copolymerization (i.e. the monomer, the initiator, and the crosslinker concentration as well as kaolin/collagen weight ratio) affected on the ultimate water-swelling capacity were optimized. Evidence of grafting and kaolin interaction was obtained by comparison of FTIR spectra of initial substrates and superabsorbent... 

NiTiHf thin films with varying hafnium contents up to 28.7at% were fabricated using simultaneous sputter deposition from separate Ni, Ti, and Hf targets onto unheated substrates. The required film composition was achieved by adjusting the power ratio to the targets. The as-deposited films were amorphous; and post deposition annealing was performed at 550°C, slightly above their crystallization temperatures. The crystallization temperature of the films varied as a function of Hf concentration, and was as high as 520°C at a Hf content of 28.7at%. 2μm thick crystallized films with I0at% or greater Hf were martensitic at room temperature. DSC analysis demonstrated that above 10at%Hf additions... 

In this paper, the energy absorption capacity of continuous fiber-reinforced thermoplastic auxetic structures is examined experimentally and the results compared with both numerical and analytical methods. To this extent, a 3 D printing technology of Fused Deposition Modeling (FDM) is implemented for fabricating the auxetic honeycombs and quasi-static compression test is conducted to extract the load-displacement behavior of the structure. Both hollow and foam filled lattice structures are tested, and the results revealed that the absorbed energy increased by 20% for PLA and 70% for PA specimens, when using foam. Finite element analysis is also performed using the explicit solver. The onset... 

Alkoxides are the most common precursors used for the production of alumina nanopowders. These materials are, however, expensive and corrosive. This paper introduces a new method for the production of alumina nanopowders by rapid cooling of a synthetic caustic sodium aluminate solution (Bayer liquor), followed by calcination in the presence of a surface-stabilizing agent like 1,2-dihydroxy-3,5-benzene disulfonic acid disodium salt (Tiron). The powders produced are characterized by differential thermal analysis, XRD, transmission electron microscopy, scanning electron microscope, and Brunauer-Emmet-Teller. A nanopowder of α-alumina with an average crystallite size of 27.7 nm and an average... 

In order to produce a thick near equi-atomic NiTi intermetallic layer on the surface of titanium plate, layers of nickel with thicknesses of 30 μm and 60 μm were electroplated on commercial pure (Cp) titanium and subsequently were heat treated at 850°C and 900°C. The effects of heat treating temperature and the thickness of electroplated nickel on the evolution of the microstructure and mechanical properties were studied. The results confirm the formation of various intermetallic layers in the coatings that substantially affect their hardness. The optimum condition for the formation of a thick NiTi intermetallic layer on the outer surface of the titanium was diffusion treatment of the sample... 

In this paper, the impact of three parameters including nanoparticles geometry, particles aggregation and borehole inclination on induced formation damage from water based drilling fluids were investigated by means of experimental studies. Accordingly, we designed a dynamic filtration setup capable to rotate and change well inclination. Nano-based drilling fluids consisting of spherical, cubical and tubular shapes nanoparticles as fluid loss additives were used. Mud cake quality, core permeability impairment and degree of formation damage at various well inclinations were examined. The cluster structure of aggregated particles were determined using fractal theory and applying dynamic light... 

During recent years, many investigations have been carried out to determine how to select different materials for the making of Micro Electro Mechanical Systems (MEMS) and bio-MEMS. The NiTi shape memory alloy thin film has been much regarded as a promising candidate for MEMS due. to its unique shape memory effect and high energy output. In this research, NiTi thin film was fabricated using a sputtering technique from separate elemental Ni and Ti targets. The characterizations of the deposited films were, investigated using different analysis techniques, such as Field Emission SEM, DSC, XR.D, electrical resistivity measurement and nanoindentation. © Sharif University of Technology, June 2009... 

As a primary step of establishment of an extensive air shower array consisting 20 scintillation detectors we optimized an individual detector. Square shaped scintillators are placed under a metal pyramid Light Enclosure with a photomultiplier tube (PMT) at the vertex of it. A set of experiments are performed to optimize the height of light enclosures by comparing 4 different heights 0.1, 0.2, 0.3 and 0.4 m. These experiments are supported by a Monte Carlo simulation of detection process. In this article, by considering experimental and simulation results we concluded that 20 cm is an optimum height for light enclosures  

This paper presents an evaluation of two distinct techniques to improve energy absorption capability of an accordion cellular structure with close-to-zero Poisson's ratio. For this purpose, fiber-reinforcement and foam-filling methods were employed to address the material enhancement and to obtain light and tough structures with high specific energy absorption. Employing an innovated additive manufacturing based on material extrusion process, specimens of glass fiber-reinforced PLA were produced in both in-plane directions to compare with the un-reinforced counterpart. In continue, some of the 3D printed samples were strengthened by means of polyurethane foam in their hollow structure. The... 

The steady 2-D boundary layer flow over a flat plate is studied analytically by homotopy perturbation method to analyze the entropy generation inside the boundary layer with constant wall temperature. By the transformations of go-verning equations including continuity, momentum, and energy by similarity va-riables, a dimensionless equation for entropy generation inside the boundary layer is obtained. The effects of important parameters such as Reynolds and Eck-ert numbers are investigated and the physical interpretations of the results are explained in details  

In this paper a new IR-UWB pulse generator circuit is proposed which is capable of solving the coexistence problem of narrowband and ultra wideband communication systems. This is done by creating a notch in the PSD of the generated UWB signal and adjusting its center frequency at the frequency of the narrowband interference. Using a triangular pulse generator, a triangular signal is generated and applied to the proposed circuit which consists of three main function blocks including quadratic, exponential and differentiator circuits. A differential pair MOS transistors in sub threshold region is utilized in order to realize the exponential block. The circuit is designed using a 0.18-μm RF... 

Fe-Ni nano-particles were synthesized by mechanical alloying and subsequent low-temperature hydrogen reduction of oxide mixtures. First, single-phase nickel ferrite was mechanically synthesized for 30 h with steel balls to powder weight ratio of 20 while the milling was operated at 300 rpm. The as-milled powder was then placed in contact with hydrogen at 600 °C for 1 h. Reduction reactions resulted in production of Fe-Ni nano-particles. Phase identification, morphological and microstructural studies, chemical analysis and magnetic property determination were carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM), transition electron microscopy (TEM), energy dispersive... 

The unique properties of modified Hermite pulses is utilized to develop a novel pulse technique for Ultra Wideband (UWB) communications. The proposed method increases the bandwidth of the pulse up to 10 GHz and overcomes the coexistence problem of UWB and vulnerable narrowband systems through suppressing narrowband interference. Consequently it improves the range of UWB communications by increasing the power, without disturbing the narrowband systems. The pulse technique is implemented in high frequency pulse generation circuits and could be fully integrated in BiCMOS process. The nulls of the frequency response are tuned to be located in a definite narrowband system with the number of the... 

Previously it was shown that the most important inclination of the EAS events due to geomagnetic field is the effect over the secondary particles of them and the contribution of the primary is so small [1]. These secondary particles are mostly e± and μ ±, so we limited our study over these particles. It was simulated over 520,000 EAS events with (ON) and without (OFF) geomagnetic field for our site (B0 = 28:1 μT i + 38:4 μT k, h = 1200m a.s.l.). It is observed a quite North-South anisotropy in ON events and a quite random anisotropy in OFF events. This anisotropy is comparable with the recorded results in our site (ALBORZ observatory), but the simulated anisotropy is a little more than the... 

Synthetic aperture radar (SAR) systems are so popular in aerial imaging because of their high resolution. Ground moving target indication (GMTI) is one of the most challenging problems in this field. The use of multiple antennas in transmit and receive is an innovative idea that can overcome the limitations of SAR systems. In this paper, after modelling the received signal and focusing it, we propose an algorithm for GMTI with the use of compressed sensing. The proposed algorithm has low complexity compared to similar algorithms. Simulation results show that this approach is accurate in estimation of positions and velocities of moving targets. © 2018 IEEE