Sharif Digital Repository

Dental implants should be biocompatible. This ability cause bone growth beside implant and increases stability of implant. Manufactoring method and materials used in implants are main parameters affectig biocompatibility of implants. Fabrication of functionally graded structures is a novel method to increase biocompatibility. Stress shielding is one of the main causes of failures in current dental implants. This phenomenon takes place due to different young modulus of dental implants and host bone. Pouros structures remedial this problem and implant’s young modulus comes closer to host bone. The aim of this project is to study feasibily of fabrication of functionally graded titanium dental... 

A mathematical model helps to understand any system with any level of complication, such as the human body. The heart, vascular system, and lungs are three important parts of each body that life is impossible without them. The performance of the cardiovascular and respiratory systems is tuned by a group of complex mechanisms which are called regulatory mechanisms. Therefore, a model which describes the behavior of these mechanisms has great importance. The goal of this research is to provide and simulate the newest and most complete model in this field. The presented model should consist of the heart, vascular system, lungs, respiratory system, gas exchange and transport, and finally... 

One of the most useful methods in metal forming is Sheet Metal Forming. Use of Forming limit diagrams (FLD) in designing is a conventional method. Therefore many experimental and theoretical efforts have been carried out in order to investigate the FLDs. Many ways to obtain this FLDs and their effective parameters have been studied. But the stress state at these studies is planar which lead to an untrue model for several metal forming process such as incremental sheet forming. With this technique, the forming limit curve (FLC) appears in a different pattern, revealing an enhanced formability, compared to conventional forming techniques. Therefore, in this study, the effect of through... 

The rapid increasment of energy carriers and investment expenses in recent years, has increased the costs of energy demand and attracted those interested in consume reduction and efficiency using modern cutting-edge technologies. This research intends to design a general framework for optimization and energy and water demanding management studies in a sample region, regarding the new concept, energy hub.Thus as the first step, the existing industries and technologies with their thermal and electrical demands is considered as the first hub and wastewater treatment plant with its other equipments and thermal and electrical demands is considered as the second hub. The main issue in the modeling... 

Permanent magnets play an essential role in the structure of the electric motor, but due to limited resources, many efforts have been made to meet the need for them. One of the most important types of non-permanent electric motors is reluctance motors. Despite their antiquity in design, torque ripples have led to the limited use of reluctance motors, but advances in science have made it possible to control these ripples.As a result of the major advantages such as low manufacturing costs, high efficiency, and uncomplicated structure, these motors have been the subject of many researches. One way to eliminate the problem of torque ripples is to increase the number of teeth, but in the common... 

The construction system, as a fundamental pillar of any country's development, requires meticulous oversight and the employment of qualified professionals. The introduction of qualified contractors in Iran as a measure to enhance the quality of construction projects and eliminate unqualified individuals from this field has been a valuable step. However, legal and operational shortcomings, as well as challenges in the contracts between contractors and employers, have hindered the effectiveness of this role. This study aimed to identify and prioritize the challenges in the workflows of qualified contractors and propose solutions for their improvement. Key identified challenges include... 

Focusing on fossil fuel to secure energy demand lead to big challenges. Hydrogen as alternative for fossil fuel has attracted a lot of attentions. Fuel cell with an electrochemical reaction which it’s byproducts are water and heat convert Hydrogen into electricity. High efficiency and low environmental pollution, persuade many researchers toward fuel cell commercialization. But problems such as high cost, high power oscillation and inertia, avoid fuel cell from significant development. One way to deal with these problems is using the fuel cell and battery hybrid system. In recent decade too many research has been made in utilizing this hybrid system in transportation. This project... 

The short life of Polymer Electrolyte Membrane (PEM) fuel cells is one of the critical criteria to their commercialization. A longer operation life time should be achieved to reach high reliability, low $/kWh cost and to use fuel cells as economical alternative energy systems.Therefore,diagnosing degradation mechanisms and the causes of power loss in fuel cell life time is of great importance. Operating conditions affect output power density and performance degradation. To achieve maximum power generation through fuel cell life time, a model is needed which is able to estimate power density and performance degradation simultaneously regarding to operating conditions. In present work, a... 

In this project a framework for Model Based Fault Diagnosis (MBFD) in a Gas Transmission Network (GTN) was developed. A black-box linear state-space model was used to capture dynamic behavior of an industrial benchmark for GTN. A full fledge commercial network simulator were used to obtain the required data for process identification. In order to check the robustness of the model zero mean white noise was imposed on various output obtained by the commercial simulator. Kalman filter was used to estimate the states of the GTN. These estimated states along with the measured output (all obtained from the commercial simulator) are almost similar to their corresponding estimated signal. This shows... 

Inappropriate effects of fossil fuels and conventional power generation systems on the environment have necessitated a sustainable energy system for the next decade by growing interests in renewable energy systems. The world’s most fast-growing renewable energy resource is the wind energy. The main problem of wind power is the power fluctuations at the load side caused by the variable nature of wind speed, and the main issue in case of remote locations is the long-term storage of power generated by wind turbines. Batteries can be used to store a limited amount of energy for a short time. Although new advances in this field have been achieved, most common type of batteries is hardly able to... 

The gradual exhaustion of oil and gas resources and the various problems involved in their pollution makes it necessary to promote a renewable energy system. One of the most interesting developments of standalone systems based on the utilization of hydrogen is solar hydrogen system. Central and southern Iran exhibit an excellent solar climate which makes them ideal places for solar hydrogen systems. The economy of Iran is based on oil and it has one of the largest reserves of oil and gas in the world but the reserves would not be enough to meet the domestic and export markets starting in three to four decades. Moreover, elimination of energy subsidies in Iran, will led to more tendencies to... 

In this thesis a general model for simulation of solar cooler for domestic usage is developed. The model consists of 2 main parts: thermo-dynamical and economical calculations. The thermodynamic part consists of 4 sub models: a model for calculation of incoming solar radiation, cooling load demand calculation, the refrigeration cycle and the solar cycle with heat storage.As for hourly calculation of system performance part of the model produces the hourly received radiation data based on geographical position and orientation of the receiving surface. Base on results of the cooling load calculation for a 9 m2 studying room located in western part of Tehran, 1 TBR (3.516 kW) is chosen as... 

increasing energy demand and emission of environmental pollutant as a result of using fossil fuels and increase in waste generated due to human activities resulted in considering this source as a partial substitute for fossil resources in power application . Hence in this project biomass is considered as source of energy for heat and power application. Having low quality energy is the most important difficulty for application this resource as an energy carrier, so, gasification is applied to convert this source to gas with higher quality one. Produced gas in gasification enters to a micro turbine to meet thermal and electrical demand of the Sharif energy research institute. To investigate... 

All living entities requires energy to continue their lives. In human beings this energy is provide through consumption of food, at first the consumed food gets converted to glucose and the produced glucose enters the blood and then goes to the body cells in which it is used to produce the required energy. The essential hormone which makes it possible to use Glucose for energy production is INSULIN. In the patients suffering from Type 1 Diabetes, lack of Insulin production makes it impossible for the cells to use Glucose for the production of their required energy. In these patients due to the fact that the blood Glucose is not used by the cells, the Blood Glucose Level (BGL) increases,... 

Application of the advanced control techniques and information technology in the biomedical engineering have been the focal point of the research communities in biomedical engineering due to the rapid growth of the nonlinear control theories along with the computer hardware. In this work the application of differential geometry and globally linearizing control has been applied to efficiently control the first phase of HIV disease based on the HIV infection model proposed in the literature. All the efforts have been in the way to obtain a suitable scenario of drug administration to suppress and control the infection. In the proposed scenario, drug administration is time dependant and...