Sharif Digital Repository

This thesis describes a robust algorithm in speech recognition system based on phoneme recognition. Automatic speech recognition systems (ASR) can be divided into two main types: speaker-dependent continuous speech PC-based systems and speaker-independent continuous-speech server based systems. In speaker- independent systems, there is no need to have knowledge about the speaker(s) before using the system, on the other hand, in speaker dependent systems it is essential to have voice training by the speaker(s) supposed to work with the system. In this thesis, a speaker-independent continuous speech PC-based system has been chosen to work with. Acoustic-phonetic approach has been chosen among... 

In spite of succesfull achievements of standard quantum mechanics in describing variety of physical phenomenons, this theory has some conceptual problems in some areas. One of the important problems is the behavior of macroscopic objects and their interaction with microscopic systems, which is called “measurement problem”. Actually because the standard quantum mechanic is linear, it anticipates the occurrence of superposition of macroscopic states which is in contrast with our understanding of macroscopic objects. The standard theory answers this problem by using the wave function reduction principle.
There has been various proposals about the mechanism of wave function reduction,... 

Water-gas shift reaction (CO(g) + H2O(g) ↔ CO2(g) + H2(g)) is performed as the key step in the hydrogen and ammonia industrial plant. In this work, Fe/Cr/Cu high temperature water gas shift catalysts were synthesized by coprecipitation method, using sulfate precursors, in order to improve the catalytic performance and particular emphasis is placed on the catalytic activity affected by aging time, precipitating agent and ways of increasing the mechanical strength. Finally the prepared and industrial catalysts were compared when they were situated in the operating conditions (at 360oC and 2 bar) and were characterized by BET, XRD, TPR, TEM and crushing strength analysis. Catalysts being made... 

Numerical simulation of combustion in turbulent flow regimes is of high importance. The accuracy of numerical predictions depends on the quality of turbulence modeling and its interaction with combustion processes. In order to more accurately represent turbulent structures and mixing, the use of Large Eddy Simulation (LES) turbulence models is desirable, despite their relatively high computational cost. Premixed combustion at low equivalence ratios has gained widespread attention in recent years due to its high efficiency and reduced emissions. In this field, a significant portion of turbulent combustion simulations have focused on Flamelet-based models. Although these models have been... 

Apatite-coated Ag/AgBr/TiO2 was prepared by deposition of Ag as noble metal to generate electron-hole pairs by extending the excitation wavelength to visible light region, AgBr as photo-sensitizer to increasing yield of photo catalyst, and apatite as adsorption bio ceramic for adsorbing pollutants and micro organisms respectively. The bactericidal experiments in dark media indicated that only novel catalyst show inhibiting growth of bacteria. In this case Transmission electron microscopy image illustrated that catalyst nano particles adhere to the outer membrane of the cell and acts as inhibitor to nourish of bacteria from around media. The mechanism for deactivation E-Coli and B.Sub in the... 

Integrated SOFC plants, because of the high efficiency and optimum energy consumption, are important processes that have many applications. According to the importance of these plants, their optimum operability and favorable operations are also very important. One of the ways to optimize the process performance is the suitable selection of the control structures. The objective of this project is to analyze the operability or inherent controllability of integrated SOFC plants in the absence of any controller. In this work, the controllability of the process have been investigated with using the output controllability index and the other indexes such as relative gain array, singular value and... 

A thermo-mechanical multi-scale framework is presented in this study for simulating the compaction process of aluminum nanopowders coated with a surface oxide layer. The primary objective is to link atomistic-scale information with continuum-scale models in order to improve the accuracy of predictions of material response under varied mechanical loading and thermal conditions. This approach enables analysis of the role of atomic-scale mechanisms in the overall material response and aims to achieve improvements in both predictive accuracy and computational efficiency relative to conventional methods. In the first step, the mechanical properties of the nanopowders were extracted at 300, 400,... 

In this project, Fe3O4 magnetic nanoparticles were prepared by co-precipitation method. For protecting them against oxidation and also avoiding from direct contact between core and additional materials that probably makes unwanted reactions, the surface of nanoparticles were coated by SiO2 layer. Being easy to modify and having the control of interactions between nanoparticles are the advantages of coating nanoparticles with silica. The obtained Fe3O4@SiO2 core-shell nanoparticles were covered by two types of polymer (PPG and PEG). The basis of the composite was characterized by VSM, TGA, SEM, XRD, and FT-IR analytical methods.
The antibacterial activities of Copper, Silver and Gold... 

Dark matter is one of the biggest unsolved problems in physics and cosmology. Almost 85 percent of the gravitational matter is not luminous and it’s properties is unknown. In recent decades variety of investigations regarding dark matter has been done which we will mention in the beginning part of this thesis. We continue testing MOdified gravity (MOG), Non-Local-Gravity (NLG) and MOdified Newtonian Dynamics (MOND) in a different scale by using the rotation curves of dwarf galaxies. In addition we compare MOG, MOND and NLG together to see which one better fit observed data. In another investigation that is reported in this thesis, we fit the observed acceleration data of galaxy cluster Abell... 

Ag / AgCl /TiO2 , 2 Ap / Ag / AgCl /TiO , 2 AgI /TiO and 2 Ap / AgI /TiO were prepared by the deposition-precipitation method on 2TiO (P25) nanoparticles and their photocatalyctic activities have been investigated under visible light and dark environments. Cationic surfactant plus 2 PVPI (topical solution and dry powder) as an iodine ion source and nonionic surfactant plus KI as an iodide ion source were used to prepar 2 AgI /TiO . In less than 30 minutes, 2 AgI /TiO which has been resulted from combination of cationic surfactant and 2 PVPI showed high efficiency on Escherichia coli under visible light when small quantities of it is used . However, AgCl sample prepared with cationic... 

In this research, we focus on study and investigation of the role of Tin(IV) Sulfide (SnS2) nanostructured layer as electron transport layer in perovskite and chalcogenide thin film solar cells. For this purpose, SnS2 powder was prepared through hydro/solvo-thermal method, utilizing different ratios of water and ethanol as solvent and various sulfur sources (thioacetamide and thiourea). Afterwards, different solvents were investigated to achieve a stable ink (about one month) with uniform dispersion. After determining the appropriate ink and powder, thin films of SnS2 were prepared employing spin coating, spray pirolysis and laser pulsed deposition (PLD) methods and characterized. With each... 

Most of current state-of-the-art methods for object tracking use adaptive tracking-by-detection. The performance of state-of-the-art methods is almost real-time with acceptable accuracy. These methods use tracking-by-detection because of its robustness. Tracking-bydetection methods use a detector as a tracker and sweep input for object of interest. They use their predictions to adapt their parameters and therefore be adaptive to appearance change in target. While suitable for cases when the object does not disappear from the scene, these methods tend to fail on occlusions. In this work, we build on a novel approach called Tracking-Learning-Detection (TLD) that overcomes this problem. In... 

Behran Mehr Peyma (BMP) is an elevator equipment producer and trader in Iran which was established in 2004. At first they are producing some regular parts of elevator and then during these years they are trying to improve their work and expand their business till they have the 15% market share in elevator market in Tehran.In this thesis I am trying to use the SWOT and PETS methods to show the exact situation of BMP comparing to the whole market considering the competitors.During this reduction in the market I suggest to BMP to change some policies and use some of its strength to attract some new customers, changing their brand name and find a relation to contribute in some tenders and... 

Medical needle interventions are a common technique for accessing tissue structures.In these procedures, needles are used, for example, to extract biopsy samples, brachytherapy, and to insert drugs. In TRUS guided prostate brachytherapy application, Physicians used ulterasound imaging to steer the needle and insert radioactive seeds into cancerous tumors to irradiate surrounding tissue over several months. Prostate rotation, deformation, and unavailability of imaging data during part of the insertion path result in misplaced seeds. To overcome these problems, in this research, we modeled the prostate, its membrane and the surrounding fatty tissue as linearly elastic homogenous material, and...