Sharif Digital Repository

In the present study, the tri-layer nanofibers were synthesized via triaxial electrospinning process to control the sustained delivery of Doxorubicin (DOX), Paclitaxel (PTX) and 5- fluorouracil (5-FU) anticancer drugs from nanofibers. The 5-FU molecules were incorporated into the core solution (chitosan/polyvinyl alcohol (CS/PVA)) to fabricate the CS/PVA/5-FU inner layer of nanofibers. The intermediate layer was prepared from poly(lactic acid)/chitosan (PLA/CS) nanofibers. The DOX and PTX molecules were initially loaded into the g-C3N4 nanosheets and following were incorporated into the PLA/CS solution to fabricate the outer layer of nanofibers. The synthesized nanosheets and nanofibers were... 

The flow field in axial turbines is complex and threedimensional. Therefore, experimental flow field is essential to determine the performance characteristics. However, such testing is always expensive and complex. Simulation of gas turbines is a simple way to reduce testing costs and complexity. The main objective of this paper is to make a detailed systematic analysis of two-stage, axial flow turbine by using of different loss models and a new suggested algorithm based on one-dimensional simulation. In one-dimensional modeling, the loss models have to be used to determine the entropy increase across each section of axial turbines stage at both the design and off-design conditions. The... 

Nitrates of lithium, cobalt and nickel are utilized to synthesize LiNi 0.8Co0.2O2 cathode material through sol-gel technique. Various synthesis parameters such as calcination time and temperature as well as chelating agent are studied to determine the optimized condition for material processing. Using TG/DTA techniques, the optimized calcination temperatures are selected. Different characterization techniques such as ICP, XRD and TEM are employed to characterize the chemical composition, crystal structure, size and morphology of the powders. Micron and nano-sized powders are produced using citric/oxalic and TEA as chelating agent, respectively. Selected powders are used as cathode material... 

The main objective of this paper is to make a detailed systematic analysis of two-stage, axial flow turbine by using of different losses models and a new suggested algorithm based on one-dimensional simulation. The suggested method is found to be effective, fast and stable, in obtaining performance characteristics of multi-stage axial flow turbines. In one-dimensional modeling, mass flow rate, pressure ratio and efficiency are unknown, with define turbine geometry, inlet total pressure and temperature the turbine performance characteristics can be modeled. This modeling is based on common thermodynamics and aerodynamics principles in a mean stream line analysis under steady state condition.... 

The aim of present research is the performance simulation of axial flow turbine on different operating conditions by using of one dimentional modeling method. In this method by receiving the flow inlet conditions and turbine geometry, velocity triangles at blade inlet and outlet are obtained and performance characteristics of the turbine are calculated. As respects the importance of modeling for performance prediction and optimization in initial desing level, in following work, that is based on one dimentional modeling method, after the presentation of solution algorithm by trial and error method and introduction of different loss models for modeling, the obtained results of modeling were... 

Digital Elevation Models (DEMs) play a significant role in hydraulic modeling and flood risk management. This study initially investigated the effect of Unmanned Aerial Vehicle (UAV) DEM resolutions, ranging from 1 m to 30 m, on flood characteristics, including the inundation area, mean flow depth, and mean flow velocity. Then, the errors of flood characteristics for global DEMs, comprising ALOS (30 m), ASTER (30 m), SRTM (30 m), and TDX (12 m) were quantified using UAV DEM measurements. For these purposes, the HEC-RAS 2D model in steady-state conditions was used to simulate the flood with return periods of 5- to 200 years along 20 km reach of Atrak River located in northeastern Iran.... 

Controlling networked dynamical systems is a complex endeavor, specifically keeping in mind the fact that in many scenarios the actors that are engaged in the dynamism behave selfishly and therefore only take into account their own individual utility, a setting that has been widely studied in the field of game theory. One way that we can control the system dynamics is through the use of control parameters that are at our disposal, but finding optimal values for these parameters is a complex and time consuming task. In this paper we use the relation between network structural properties and control parameters to create a mathematical model that uses learning methods to find optimal values... 

In this paper, the problem of obtaining the optimal trajectory of a Dual-Arm Cam-Lock (DACL) robot is addressed. The DACL robot is a reconfigurable manipulator consisting of two cooperative arms, which may act separately. These may also be cam-locked in each other in some links and thus lose some degrees of freedom while gaining higher structural stiffness. This will also decrease their workspace volume. It is aimed to obtain the optimal configuration of the robot and the optimal joint trajectories to minimize the consumed energy for following a specific task space path. The Pontryagin's Minimum Principle is utilized with a shooting method to resolve kinematic redundancy. Numerical examples... 

In this paper, the problem of obtaining the optimal trajectory of a Dual-Arm Cam-Lock (DACL) robot is addressed. The DACL robot is a reconfigurable manipulator consisting of two cooperative arms, which may act separately. These may also be cam-locked in each other in some links and thus lose some degrees of freedom while gaining higher structural stiffness. This will also decrease their workspace volume. It is aimed to obtain the optimal configuration of the robot and the optimal joint trajectories to minimize the consumed energy for following a specific task space path. The Pontryagin's Minimum Principle is utilized with a shooting method to resolve kinematic redundancy. Numerical examples... 

Many applications, such as e-passport, e-health, credit cards, and personal devices that utilize Radio frequency Identification (RFID) devices for authentication require strict security and privacy. However, RFID tags suffer from some inherent weaknesses due to restricted hardware capabilities and are vulnerable to eavesdropping, interception, or modification. The synchronization and untraceability characteristics are the major determinants of RFID authentication protocols. They are strongly related to privacy of tags and availability, respectively. In this paper, we analyze a new lightweight RFID authentication protocol, Song and Mitchell, in terms of privacy and security. We prove that not... 

The developing of RFID systems in sensitive applications like e-passport, e-health, credit cards, and personal devices, makes it necessary to consider the related issues such as maximum reading distance, communication speed and data security. The use of signal processing methods is an efficient and convenient way to achieve the maximum reading distance and communication rate. However, the signal processing techniques are not adequate to provide a reasonable level of security and privacy for RFID systems. Thus, it is necessary to employ specific authentication protocols which assure data security and preserve the user’s privacy. Among other security and privacy characteristic of an RFID... 

Bio-composites are outstanding alternatives to prevalent biomaterials in medical instruments due to their supreme material properties. On the other hand, mechanical analyses of bio-systems should be carried out to optimize the designed biomedical applications such as medical implants. Therefore, bulk wave propagation analysis of functionally graded (FG) bio-composite beams could serve as design targets of biomedical structures. Some applications like medical implants have a layered structure and FG composites will be an appropriate choice for constitutive material of such structures. In the current study, the influence of imperfection on the propagation of bulk waves in FG bio-composite... 

Yeh et al. have recently proposed a mutual authentication protocol based on EPC Class-1 Gen.-2 standard. They claim their protocol is secure against adversarial attacks and also provides forward secrecy. In this paper we show that the proposed protocol does not have cited security features properly. A powerful and practical attack is presented on this protocol whereby the whole security of the protocol is broken. Furthermore, Yeh et al.'s protocol does not assure the untraceabilitiy and backwarduntraceabilitiy attributes. We also will propose our revision to safeguard the Yeh et al.'s protocol against cited attacks  

In this article, wave propagation behavior of a size-dependent spinning graphene nanoplatelet-reinforced composite (GNPRC) cylindrical nanoshell with porosity is presented. The effects of small scale are analyzed based on nonlocal strain gradient theory (NSGT), this accurate theory employs exact length scale parameter and nonlocal constant. The governing equations of GNPRC cylindrical nanoshell coupled with piezoelectric actuator (PIAC) are evolved by minimum potential energy principle and solved by the analytical method. For the first time in the current study, wave propagation-porosity behavior of a GNPRC cylindrical nanoshell coupled with PIAC is examined based on NSGT. The results show... 

Carbonaceous radioactive waste is produced by adsorption of effluent gases of UF6 production line, on a bed of charcoal. Current research was aimed at developing a process for recovery of uranium from this waste in a laboratory and at pilot scale. As a first step, leaching of uranium from carbonaceous radioactive waste was undertaken by successive steps using Al(NO3)3 and nitric acid, the former used to eliminate corrosivity of the F− ions. The stoichiometry of reaction between F− and Al3+ ions form complexes ranging from AlF2+, AlF2+ to AlF3 depending upon their molar ratio. The results showed that the increase of NO3−/U ratio increased the uranium leaching efficiency. Presence of some... 

The development of RFID systems in sensitive applications like e-passport, e-health, credit cards, and personal devices, makes it necessary to consider the related security and privacy issues in great detail. Among other security characteristic of an RFID authentication protocol, untraceability and synchronization are the most important attributes. The former is strongly related to the privacy of tags and their holders, while the latter has a significant role in the security and availability parameters. In this paper, we investigate three RFID authentication protocols proposed by Duc and Kim, Song and Mitchell, and Cho, Yeo and Kim in terms of privacy and security. We analyze the protocol... 

With the advent of online social networks, the trust-based approach to recommendation has emerged which exploits the trust network among users and makes recommendations based on the ratings of trusted users in the network. In this paper, we introduce a two dimensional trust model which dynamically gets updated based on users's feedbacks, in contrast to static trust values in current trust models. Explorability measures the extent to which a user can rely on recommendations returned by the social network of a trusted user. Dependability represents the extent to which a user's own ratings can be trusted by users trusting him directly and indirectly. We propose a method to learn the values of...