Sharif Digital Repository

The accurate measurement of surface roughness is essential in ensuring the desired quality of machined parts. The most common method of measuring the surface roughness of machined parts is using a surface profile-meter with a contact stylus, which can provide direct measurements of surface profiles. This method has its own disadvantageous such as workpiece surface damage due to mechanical contact between the stylus and the surface, In this paper we proposed a eontactless method using image processing and artificial neural network as a pattern classifier. Having trained the network for any specific workpiece with 10 sample patterns, the system would learn how to approximate the actual surface... 

One of the leading causes for death after heart diseases and cancer in all over the world is still stroke. Most strokes happen because an artery carrying blood from the heart to the brain is clogged. Most of the time, as with heart attacks, the problem is atherosclerosis, hardening of the arteries, calcified build up of fatty deposits on the vessel wall. The primary troublemaker is the carotid artery, one on each side of the neck, the main thoroughfare for blood to the brain. In this study, the fluid dynamic simulations were done in the carotid bifurcation artery for studying the formation of atherosclerosis, and shear thinning behavior of blood as well as Newtonian comportment was studied.... 

In the present study, the ACF-TiO2 catalyst was synthesised and used as a catalyst for the destruction of toxic cyanide in both synthetic and real industrial wastewaters. The ACF-TiO2 catalyst was found to be micro-porous with the BET surface area of 163 m2/g. The effect of different operational parameters such as catalyst concentration, cyanide concentration, operation time, and ozone concentration were target parameters in the present study. The findings show that 500 mg/L of catalyst is the optimum value for the photocatalytical process to completely oxidise 25 mg/L of cyanide within 10 min. While it was found that 300 mg/L of catalyst in the presence of 200 mg/h ozone is enough to remove... 

In the present study, the ACF-TiO2 catalyst was synthesised and used as a catalyst for the destruction of toxic cyanide in both synthetic and real industrial wastewaters. The ACF-TiO2 catalyst was found to be micro-porous with the BET surface area of 163 m2/g. The effect of different operational parameters such as catalyst concentration, cyanide concentration, operation time, and ozone concentration were target parameters in the present study. The findings show that 500 mg/L of catalyst is the optimum value for the photocatalytical process to completely oxidise 25 mg/L of cyanide within 10 min. While it was found that 300 mg/L of catalyst in the presence of 200 mg/h ozone is enough to remove... 

Purpose: This paper aims to study peroxymonosulfate (PMS) activation in the ultraviolet (UV)/ozone process for toxic cyanide degradation from aqueous solution by a novel and simple method. Design/methodology/approach: Photocatalytic degradation of cyanide (CN-) was carried out using a bench-scale photoreactor. Optimization of the UV/ozone process for the highest removal of cyanide was obtained. The effect of parameters such as ozone concentration, PMS concentration, temperature, cations (Cu2+, Co2+ and Fe2+), cyanide concentration, anions (bicarbonate, carbonate, chloride, nitrite, nitrate and sulfate [SO42−]) and scavengers (ethanol [EtOH], humic acid, TBA and NaN3) was investigated for CN-... 

In this study a model is presented to predict the residual strength of composite laminates exposed to the heat flux of fire. This model calculates the number of the damaged laminas considering the charred thickness of the composite laminate and then predicts the overall residual strength of the laminate analyzing each lamina. Charred laminas no longer have their initial properties due to decomposition of their polymer matrix. This model can obtain the damaged thickness by introducing a damage temperature, and solving the energy equation for the thermochemical response of the laminate. The thickness of the charred layer is measured for the laminate after exposure to different heat fluxes and... 

The square of a graph G denoted by G2, is the graph with the same vertex set as G and edges linking pairs of vertices at distance at most 2 in G. The chromatic number of the square of the Cartesian product of two cycles was previously determined for some cases. In this paper, we determine the precise value of χ((Cm□Cn)2) for all the remaining cases. We show that for all ordered pairs (m,n) except for (7,11) we have χ(Cm□Cn)2)=γV((Cm□Cn)2)|α((Cm□Cn)2), where α(G) denotes the independent number of G. This settles a conjecture of Sopena and Wu (2010). We also show that the smallest integer k such that χ(Cm□Cn2)≤6 for every m,≥k is 10. This answers a question of Shao and Vesel (2013)  

Level Crossing (LC) Analog-to-Digital converters have been suggested as an asynchronous alternative to conventional schemes. It is our intention to improve the performance of these LC converters. In this paper, we also suggest alternative adaptive and multi-level adaptive LC schemes and use an iterative method to drastically improve the performance of LC converters. The impressive improvement of these schemes make LC converters a potential competitor to other conventional A/D converters such as Sigma Delta Modulators (SDM). ©2007 IEEE  

Double talk detector is the essential part of an echo canceller to keep the adaptive filter from divergence in presence of near-end speech. This work is a contribution to propose a new double talk algorithm based on power, this method detects double-talk quickly; also it can distinguish the double-talking when the channel has the varying gain. In this paper, we first present an analytical discussion describing this new method and then we show the simulation result to compare our proposed algorithm in both performance and complexity with Giegel algorithm-the most successful one in line echo cancellers. ©2007 IEEE  

In this paper, chaos in spatial attitude dynamics of a triaxial rigid satellite in an elliptic orbit is investigated analytically and numerically. The goal in the analytical part is to prove the existence of chaos and then to find a relation for the width of chaotic layers (i.e. the initial values needed to have a chaotic attitude motion) based on the parameters of the system. The numerical part is aimed at validating the analytical method using the Poincaré maps and the maximum value of the Lyapunov exponents. The rotational–translational Hamiltonian of the system is first derived. This Hamiltonian has six degrees of freedom. Choosing a proper set of coordinates and given the fact that the... 

In this paper, chaos in spatial attitude dynamics of a triaxial rigid satellite in an elliptic orbit is investigated analytically and numerically. The goal in the analytical part is to prove the existence of chaos and then to find a relation for the width of chaotic layers (i.e. the initial values needed to have a chaotic attitude motion) based on the parameters of the system. The numerical part is aimed at validating the analytical method using the Poincaré maps and the maximum value of the Lyapunov exponents. The rotational–translational Hamiltonian of the system is first derived. This Hamiltonian has six degrees of freedom. Choosing a proper set of coordinates and given the fact that the... 

In this paper, we analytically and numerically investigate chaos in attitude dynamics of a flexible satellite composed of a rigid body and two identical rigid panels attached to the main body with springs. Flexibility, viewed as a perturbation, can cause chaos in the satellite. To show this, first, we use a novel approach to define this perturbation. Then, we employ canonical transformation to transform the Hamiltonian of the system from five to three degrees of freedom. Next, we approximate the system by a second-order differential equation with a time quasiperiodic perturbation. Finally, we apply Melnikov–Wiggins’ method near the heteroclinic orbits to prove the existence of chaos. Using... 

The digital radio receivers often have fast analog to digital converters delivering vast amount of data. However, in many cases, the signal of interest represents a small proportion of that bandwidth. A Digital Down Converter (DDC) is a filter that extracts the signal of interest from the incoming data stream. In this paper we first introduce an algorithm based on FFT which can be applied for simultaneous frequency shifting and decimating of Intermediate Frequency (IF) band signals, then a simplified iterative algorithm is suggested to improve the quality of reconstructed baseband signal. ©2007 IEEE  

The influenza virus hemagglutinin is an important part of the virus attachment to the host cells. The hemagglutinin proteins are one of the genetic regions of the virus with a high potential for mutations. Due to the importance of predicting mutations in producing effective and low-cost vaccines, solutions that attempt to approach this problem have recently gained significant attention. A historical record of mutations has been used to train predictive models in such solutions. However, the imbalance between mutations and preserved proteins is a big challenge for the development of such models that need to be addressed. Here, we propose to tackle this challenge through anomaly detection... 

Estate administration involves managing and distributing a deceased individual’s assets to beneficiaries, as well as managing the liabilities. This process comprises legal, financial, and administrative tasks that ensure assets are transferred based on the deceased's wishes and in accordance with the law. In Southeast Asia countries such as Indonesia, Malaysia and Brunei where Muslims represents the majority of population, the Islamic law plays an integral part in the inheritance management as the process to be in line with the Islamic teachings and principle. The role of the syariah authority namely the syariah courts is prevalent and therefore, abidance to the rule under the syariah legal... 

A novel intelligent semi-active control system for an eleven degrees of freedom passenger car's suspension system using magnetorheological (MR) damper with neuro-fuzzy (NF) control strategy to enhance desired suspension performance is proposed. In comparison with earlier studies, an improvement in problem modeling is made. The proposed method consists of two parts: a fuzzy control strategy to establish an efficient controller to improve ride comfort and road handling (RCH) and an inverse mapping model to estimate the force needed for a semi-active damper. The fuzzy logic rules are extracted based on Sugeno inference engine. The inverse mapping model is based on an artificial neural network... 

Using CNG as an additive for gasoline is a proper choice due to higher octane number of CNG enriched gasoline with respect to that of gasoline. As a result, it is possible to use gasoline with lower octane number in the engine. This would also mean the increase of compression ratio in SI engines resulting in higher performance and lower gasoline consumption. Over the years, the use of simulation codes to model the thermodynamic cycle of an internal combustion engine have developed tools for more efficient engine designs and fuel combustion. In this study, a thermodynamic cycle simulation of a conventional four-stroke spark-ignition engine has been developed. The model is used to study the... 

With the declining energy resources and increase of pollutant emissions, a great deal of efforts has been focused on the development of alternatives for fossil fuels. One of the promising alternative fuels to gasoline in the internal combustion engine is natural gas [1-5]. The application of natural gas in current internal combustion engines is realistic due to its many benefits. The higher thermal efficiency due to the higher octane value and lower exhaust emissions including CO2 as a result of the lower carbon to hydrogen ratio of the fuel are the two important feature of using CNG as an alternative fuel. It is well known that computer simulation codes are valuable economically as a cost...