Loading...
Search for: ghazanfari--amir
0.116 seconds

    Experimental Investigation of Stability Analysis and Applicability of Foam Flooding for Enhanced Oil Recovery

    , M.Sc. Thesis Sharif University of Technology Shokrollahi, Amin (Author) ; Ghazanfari, Mohammad Hossein (Supervisor) ; Badakhshan, Amir (Co-Advisor)
    Abstract
    One of the suitable methods in EOR processes is miscible and immiscible gas injection. By gas injection, it is possible to replace all the oil, which is in contact with the gas. However, reservoir heterogeneity, low density, and low viscosity of gas result in problems such as gravity segregation, and fingering and consequently the gas reach the production well without any significant contact with reservoir oil. A way to deal with this problem is gas injection in the form of foam. In fact, gas injection in this manner increases the oil production by decreasing gas mobility and the negative effects of reservoir heterogeneity on gas displacement. Foam stability has a key role on the efficiency... 

    Experimental Investigation of Water and Oil Based Colloidal Gas Aphron Drilling Fluid Performance Containing Nanoparticles in Formation Damage Reduction

    , M.Sc. Thesis Sharif University of Technology Hassani, Amir Hossein (Author) ; Ghazanfari, Mohammad Hossein (Supervisor) ; Rashtchian, Davood (Supervisor)
    Abstract
    In recent years, utilizing the colloidal gas aphron (CGA) drilling fluids is getting more and more commonplace due to their little formation damage and filtration loss. This study tries to investigate the effect of presence of nanoparticles and their type (hydrophobicity) on stability and performance of water and oil based CGA drilling fluids. This is done through analyzing stability, filtration, rheology, and pore blockage tests. Water and oil based CGA drilling fluids consisted of stabilizer, surfactant, and nanoparticles are generated and through examining of the effects of polymer, surfactant, and nanoparticle concentrations, the optimum formulation is obtained. High pressure-high... 

    Experimental and Simulation Study of Water Alternating Hydrocarbon - CO2 Mixture Gas in one of Iranian Oil Reservoirs

    , M.Sc. Thesis Sharif University of Technology Alizadeh, Ali (Author) ; Taghikhani, Vahid (Supervisor) ; Ghazanfari, Mohammad Hossein (Supervisor) ; Badakhshan, Amir (Supervisor)
    Abstract
    In this work the effect of composition changes of the injection gas (Hydrocarbon gas + carbon dioxide) on Water Alternating Gas (WAG) performance in immiscible flooding which has been rarely attended in the available literature is investigated. Core flood experiments are conducted on a 10 cm length Sarvak sandstone core sample at 46 degree C and at immiscible condition, i.e., below the minimum miscible pressure (MMP) of the oil sample using pure CO2 as injected Gas.The influence of injection WAG ratio on oil recovery also is investigated. Artificial injection brine which is made by dissolving NaCl into distilled water with 5000 ppm (mg/L), NaftShahr oil which has about 41 API gravity and... 

    Experimental Investigation of Carbonated Water Alternating Nitrogen Gas Injection to Enhance Heavy Oil Recovery From Carbonated Rock Reservoir

    , M.Sc. Thesis Sharif University of Technology Majidi, Mohammad Javad (Author) ; Ghazanfari, Mohammad Hossein (Supervisor) ; Taghikhani, Vahid (Co-Advisor) ; Badakhshan, Amir (Co-Advisor)
    Abstract
    By continuous decreasing the fossil fuel energy resources and increasing demand of such energies on the other hand with decreasing exploration of the new ones, production from these limited resources are in grate consideration. As a few percentages of the oil recovers by primary oil production and also remaining a lot of oil after water and gas injection in the secondary oil recovery process, causes that new methods to increase the oil recovery has been proposed. Water injection is a simple and common method in enhanced oil recovery process. Also water alternating gas injection and simultaneous water and gas injection causes considerable increase in oil recovery. Recently utilization of... 

    A general model for I/O system theory, Proceedings of AIMC31 [electronic resource]

    , Article Iranian Journal of Fuzzy Systems ; 2006, Volume 3, Issue 2, Page 1-19 Daneshgar, A. (Amir) ; Hashem, Amir ; Sharif University of Technology

    Experimental investigation of water alternating CH4-CO2 mixture gas injection to light oil reservoirs

    , Article 74th European Association of Geoscientists and Engineers Conference and Exhibition 2012 Incorporating SPE EUROPEC 2012: Responsibly Securing Natural Resources, 4 June 2012 through 7 June 2012 ; June , 2012 , Pages 3919-3923 ; 9781629937908 (ISBN) Ghazanfari, M. H. G. H ; Alizadeh, A
    European Association of Geoscientists and Engineers, EAGE  2012
    Abstract
    In this work effect of composition changes of injection gas, CH4 + CO2, on the performance of immiscible WAG injection in light oil, 41 oAPI, which has been rarely attended in the available literature is investigated. Presence of CO2 helps to reduce the MMP of CH4 significantly. Core flood experiments are conducted at reservoir conditions and fixed flow rate of 0.5cc/min on a sandstone sample with the brine concentration of 5000 ppm, and the influence of injection gas composition as well as WAG ratio on oil recovery is investigated. Different mole percents of methane in mixture, 0%, to 100% are examined, and the tests continued to ten alternate cycles with a slug size of 0.1 pore volumes and... 

    Calibration of forming limit diagrams using a modified Marciniak-Kuczynski model and an empirical law

    , Article Materials and Design ; Volume 34 , Feb , 2012 , Pages 185-191 ; 02641275 (ISSN) Ghazanfari, A ; Assempour, A ; Sharif University of Technology
    2012
    Abstract
    The major problem in determining the forming limit diagram (FLD) with the Marciniak-Kuczynski (M-K) model is the necessity of an experimental point in order to find the initial inhomogeneity coefficient and calibrate the diagram. The purpose of the present work is to eliminate this requirement. To do this, the usual assumption of geometrical inhomogeneity has been replaced with material inhomogeneity and it has been shown that the sensitivity of the diagram to variations of the inhomogeneity factor is reduced greatly with the new assumption. Using this advantage and collecting enough experimental data for different materials, an empirical law in terms of sheet thickness has been proposed... 

    A new calibration method for FLCs in the M-K frame-work

    , Article Advanced Materials Research, 8 July 2011 through 11 July 2011 ; Volume 341-342 , July , 2012 , Pages 426-431 ; 10226680 (ISSN) ; 9783037852521 (ISBN) Ghazanfari, A ; Assempour, A ; Sharif University of Technology
    2012
    Abstract
    The main drawback of the method proposed by Marciniak and Kuczynski for prediction of the limit strains in sheet metal forming processes is requirement of an experimental point of the forming limit curve (FLC) in order to calibrate the curve. The purpose of this work is to introduce a new method to calibrate the FLC using the M-K model in which no experimental data is needed. To achieve this goal, many experimental FLCs were collected from the literature and the values of the initial inhomogeneity factors were determined for them with trial and error aproach. Using these data, an empirical law was developed to predict the value of inhomogeneity factor. The resultant curves show good... 

    A critical assessment of forming limit prediction models and beneficial modifications to them

    , Article SAE Technical Papers ; 2012 Ghazanfari, A ; Assempour, A ; Sharif University of Technology
    SAE  2012
    Abstract
    Major forming limit prediction models and calibration methods are reviewed briefly and their advantages and disadvantages are discussed. Two modified Marciniak-Kuczynski (M-K) models and one modified NADDRG (Keeler-Brazier) model are also presented which have some advantages over conventional models. In the first modified M-K model, material non-homogeneity has been substituted for geometrical non-homogeneity to reduce the sensitivity of the traditional model to variations of the initial non-homogeneity. Using this important advantage, a semi-empirical relation is proposed to predict the value of the initial material non-homogeneity. In the second modified M-K model, the conventional... 

    Control of Multi Inverter Microgrid Considering Hybrid Distributed Generation Systems and Renewable Energy Sources in Island Mode

    , M.Sc. Thesis Sharif University of Technology Ghazanfari, Amin (Author) ; Mokhtari, Hossein (Supervisor)
    Abstract
    Nowdays, distributed generation (DG) systems based on renewable energy sources have significantly increased around the world as an alternative solution to enhance the power quality and reliability and reduce the need for extensive transmission system as well. An evolved recent concept called microgrid is developed by grouping a cluster of loads and DG units in a common local area which increases the integaration of sustainable energy generation systems. This thesis presents control of a medium voltage (MV) microgrid considering multi-hybrid distributed generation systems (MHGS) and renewable energy resources in island mode. The first part is focused on the development a control strategy for... 

    A Feedback-based Process of Corporate Structur Design

    , M.Sc. Thesis Sharif University of Technology Ghazanfari, Hossein (Author) ; Modarres, Abdolhamid (Supervisor)
    Abstract
    Designing the structure of organization is one of the most important issues confronting all managers, especially those in large corporations. Structure design process consists of making several trade-offs about parameters that are affected with various contingency factors. This leads manages to confusion so some of them have no plans for progressing this process. Referring to organization theory and design, one sees a large number of models of organizational structure design. But there is not any means to compare them with each other. In this research, next the introduction of a conceptual feed-back model of organizational structure design process, three well-known processes in the last... 

    International Oil Price Time Series Prediction Using GMDH Neural Network and its Performance Comparison with MLP Neural Network and ARIMA Method

    , M.Sc. Thesis Sharif University of Technology Ghazanfari, Mahdi (Author) ; Haji, Alireza (Supervisor)
    Abstract
    Predicting oil prices, especially in exporting countries, will help governments in the policy-making process by obtaining a reliable estimate of oil revenues. The existence of a complex mechanism governing the process of oil price formation has reduced the efficiency of linear models in forecasting and led researchers to use nonlinear intelligent systems to predict oil prices. In this study, after a detailed study of the structure of artificial neural network, two models of neural network GMDH and MLP and ARIMA method have been used to predict oil price. There are important factors in the prediction process with neural networks, and if all these factors are selected correctly; One can expect... 

    Experimental and Numerical Study of Spray Combustion under Hot-diluted Conditions

    , M.Sc. Thesis Sharif University of Technology Azimi, Amir Hossein (Author) ; Mardani, Amir (Supervisor)
    Abstract
    In this thesis, combustion of liquid fuel spray under the condition of hot and diluted oxidizer, has been investigated. To this end, a novel type laboratory-scale test rig was designed to study the physics governing the MILD-Spray combustion conditions with an applied approach. The underlined test rig eliminates the operational problems of its predecessor test stands and is used for a heavier fuel with much more complex chemical composition (kerosene). The test section is axially symmetrical, in which the fuel is injected by a pressure-swirl atomizer in the direction of hot and diluted co-flowing air. With the use of the aforesaid test rig, the effect of variables such as oxygen... 

    Microwave assisted regeneration of carbonyl compounds from 2,4-dinitrophenylhydrazones with potassium ferrate(VI) supported on montmorillonite K-10

    , Article Acta Chimica Slovenica ; Volume 51, Issue 2 , 2004 , Pages 337-342 ; 13180207 (ISSN) Ghazanfari, D ; Hashemi, M. M ; Sharif University of Technology
    2004
    Abstract
    2,4-Dinitrophenylhydrazones were efficiently and rapidly converted to their corresponding carbonyl compounds with supported potassium ferrate(VI) under microwave irradiation  

    Experimental and Theoretical Investigations of Calibration Methods and Factors Influencing the Forming Limit Diagrams

    , M.Sc. Thesis Sharif University of Technology Ghazanfari, Amir (Author) ; Assempour, Ahmad (Supervisor)
    Abstract
    In designing of sheet metal forming processes, knowledge of the maximum permissible strains in the sheet is of prime importance for the design engineer. Thus, a large amount of experimental and theoretical researches have been carried out to estimate these limiting strains. A renowned and prevalent theoretical method for prediction of forming limits is the Marciniak and Kuczynski model. In this model, it is assumed that a small groove exists in the sheet even before applying the loads; and due to the weakness of this region, necking starts from there. The major problem of the M-K model is requiring of an experimental point to “calibrate” the results. Furthermore, while experiments indicate... 

    Pore-Scale Experimental Study of Foam/Nano-Foam Flooding to Heavy oil in Heterogeneous Five-Spot System: Stability Analysis and Displacement Mechanisms

    , M.Sc. Thesis Sharif University of Technology Suleymani, Mohammad (Author) ; Ghazanfari, Mohammad Hossein (Supervisor)
    Abstract
    Foam injection for enhanced oil recovery is concerned by petroleum engineers because it decreases adverse effects of fingering and gravity segregation caused by the injected fluid .Obviously foam stability is an important factor in the efficiency of this process. So investigating it is an imperative. One of the ways that less studied and can improve foam stability is using of nanoparticles. In this project effect of nanoparticles on foam stability and displacement mechanism during foam flooding has been discussed.
    Study consisted of two sets of experiments. In the first part, the static foam stability in the presence of silica nanoparticles has been investigated. Also influence of... 

    Modeling and Simulation of Miscible Flow through Fractured Porous Media Using Random Walk Method

    , M.Sc. Thesis Sharif University of Technology Fayazi, Amir (Author) ; Ghazanfari, Mohammad Hossein (Supervisor)
    Abstract
    Miscible displacement in fluid flowing through a porous medium plays an important role in many environmental and industrial applications; for instance, miscible displacements in enhanced oil recovery processes and pollutant spreading in groundwater. A large number of numerical approaches have been developed to solve the advection-dispersion equation that describes the behavior of miscible displacement in porous media. Most of these numerical models suffer from numerical dispersion. Random walk seems to be an effective method to overcome this problem especially in heterogeneous media. Here, a random walk model was developed and used for simulating miscible displacement in heterogeneous porous... 

    General theory of translation invariant systems [electronic resource]

    , Article Mathematics and Its Applications ; Volume 329, 1995, pp 77-89 Daneshgar, A. (Amir) ; Sharif University of Technology
    Abstract
    The basic goal of this article is to present an abstract system-theoretic approach to morphological filtering and the theory of translation invariant systems which is mainly based on residuated semigroups. Some new results as well as a number of basic questions are also introduced  

    Duality in a generalized model for translation invariant systems [electronic resource]

    , Article Fuzzy Sets and Systems ; 1996, Volume 83, Issue 3, Pages 347–352 Daneshgar, A. (Amir) ; Sharif University of Technology
    Abstract
    In a previous paper we introduced a generalized model for translation invariant (TI) operators. In this model we considered the space, φ of all maps from an abelian group G to ω U {-∞}, called LG-fuzzy sets, where ω is a complete lattice-ordered group; and we defined TI operators on this space. Also, in that paper, we proved strong reconstruction theorem to show the consistency of this model. This theorem states that for an order-preserving TI operator Y one can explicitly compute Y(A), for any A, from a specific subset of φ called the base of Y. In this paper duality is considered in the same general framework, and in this regard, continuous TI operators are studied. This kind of operators... 

    Reconstruction in a generalized model for translation invariant systems [electronic resource]

    , Article Fuzzy Sets and Systems ; 1996, Volume 83, Issue 1, Pages 51–55 Daneshgar, A. (Amir) ; Sharif University of Technology
    Abstract
    We consider translation invariant (TI) operators on Φ, the set of maps from an abelian group G to Ω ∪ {−∞} , called LG-fuzzy sets, where 0 is a complete lattice ordered group. By defining Minkowski and morphological operations on Φ and considering order preserving operators, we prove a reconstruction theorem. This theorem, which is called the Strong Reconstruction Theorem (SRT), is similar to the Convolution Theorem in the theory of linear and shift invariant systems and states that for an order preserving TI operator Y one can explicitly compute Y ( A ), for any A , from a specific subset of Φ called the base of Y . The introduced framework is a general model for the theory of translation...