Sharif Digital Repository

In the present study, titanium nano-particles have been synthesized using chemical vapor condensation (CVC) process. Reaction of sodium and titanium tetrachloride vapors in the tube furnace resulted in the production of titanium nano-particles that were encapsulated in sodium chloride. Dried Argon gas was employed as a carrying agent. Titanium nano-particles were contained in an ethanol bath. Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD) were employed for analysis and characterization of nano-particles. The size of primary particles was smaller than 100 nm and secondary particles were submicron agglomerations  

This paper proves that if G is a graph (parallel edges allowed) of maximum degree 3, then χc′(G) ≤ 11/3 provided that G does not contain H1 or H2 as a subgraph, where H1 and H2 are obtained by subdividing one edge of K23 (the graph with three parallel edges between two vertices) and K4, respectively. As χc′(H1) = χ c′(H2) = 4, our result implies that there is no graph G with 11/3 < χc′(G) < 4. It also implies that if G is a 2-edge connected cubic graph, then χc′(G) ≤ 11/3. © 2005 Wiley Periodicals, inc  

Using software products as engineering artifacts is becoming more widespread in industry. It leads to increasing the need for training students and experts in the academic centers with software developing skills in accordance with the engineering principles and disciplines. However, one of the main challenges in the software engineering education is how to teach engineering disciplines to the students so that we can inspire the engineering concept to them. To do so if we use educational methods for teaching this course, which can show the usage of engineering disciplines to the students in practice and demonstrate the impact of their application on creating the engineered software products,... 

A critical set in an n×n array is a set C of given entries, such that there exists a unique extension of C to an n×n Latin square and no proper subset of C has this property. For a Latin square L, scs(L) denotes the size of the smallest critical set of L, and scs(n) is the minimum of scs(L) over all Latin squares L of order n. We find an upper bound for the number of partial Latin squares of size k and prove thatn2-(e+o(1))n10/6≤maxscs(L)≤n2- π2n9/6.This improves on a result of Cavenagh (Ph.D. Thesis, The University of Queensland, 2003) and disproves one of his conjectures. Also it improves the previously known lower bound for the size of the largest critical set of any Latin square of order... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the... 

Phenols and alcohols are silylated with hexamethyldisilazane (HMDS) under microwave irradiation in solvent-free condition in good to excellent yields  

Carbon capture is crucial for mitigating climate change and achieving global emissions reduction targets. Among various technologies, absorption-based methods using aqueous solvents are among the most common and efficient, offering high capture rates and retrofit capabilities for existing industrial facilities. However, selecting the optimal solvent is challenging due to its direct impact on the performance, efficiency, and cost-effectiveness of the carbon capture process. This research introduces a novel multi-class classification methodology for solvent selection in carbon capture. Leveraging a dataset of 656 data points, including features such as temperature, pressure, molar ratio, and... 

Purpose: Intensive actions implemented to alleviate poverty created many challenges. Millions of people face acute food insecurity; hence, food production needs to be increased to feed the existing and increasing population through sustainable agricultural practices. Sustainable agricultural development is the only way forward to assist humanity. Research Method: TExisting literature on sustainable agriculture was reviewed, explored, understood, described, evaluated, and synthesized and their relationships to sustain smallholder farmers were analyzed. Findings: Technological innovations in increasing resource use efficiency, modern breeding techniques, and renewable energy sources aid in...