Sharif Digital Repository

This article works with performance improvement of the conventional combined cooling/power (CCP) cycles to augment energy and exergy efficiencies of the previous systems. For this target, a conceptual configuration of cascade ejector refrigeration system (CERS) is proposed and is joined with organic Rankine cycle (ORC) to generate power and cooling outputs. The introduced CCP system can generate cooling load at two various temperatures for freezing and air-conditioning usages. For power sub-cycle, basic ORC and recuperative ORC with turbine bleeding are selected as topping cycles. Thermodynamic and exergoeconomic assessments of the cycles are done, leading to provision of the working... 

Total site integration offers energy conservation opportunities across different individual processes. It also helps for design as well as optimization of the central utility system. It gives massive energy-saving opportunities. The large industrial CHP sites generate heat and power simultaneously. These sites have different steam levels at different pressures which are used for power generation via steam turbines and also directly for satisfying process heat demand. There are many sites requiring cooling demand in hot seasons. In this article, integration of a LiBr/water absorption chiller in a CHP site has been investigated until its cooling demand is satisfied. Low pressure steam at 3 bar... 

In the present study, exergoeconomic optimization of a trigeneration system for cooling, heating and power purposes has been carried out. The system is made up of air compressor, combustion chamber, gas turbine, dual pressure heat recovery steam generator and absorption chiller in order to produce cooling, heating and power. The design parameters of this study are selected as: air compressor pressure ratio, gas turbine inlet temperature, pinch point temperatures in dual pressure heat recovery steam generator, pressure of steam that enters the generator of absorption chiller, process steam pressure and evaporator of the absorption chiller chilled water outlet temperature. The economic model... 

Aquifers are underground porous formations containing water. Confined aquifers are the formations surrounded by two impermeable layers, called cap rocks and bed rocks. These aquifers are suitable for seasonal thermal energy storage. In the present study, a confined aquifer was considered to meet the cooling and heating energy needs of a residential complex located in Tehran, Iran. Three different alternatives were analyzed in this aquifer thermal energy storage (ATES), including: using ATES for cooling alone, for cooling and heating, as a heat pump, and for heating alone, employing flat plate solar energy collectors. A numerical simulation, based on the finite difference method, was carried... 

Aquifers are underground porous formations containing water. Confined aquifers are surrounded by impermeable layers on top and bottom, called cap rocks and bed rocks. A confined aquifer with a very low groundwater flow velocity was considered to meet the annual cooling and heating energy requirements of a residential building complex in Tehran, Iran. Three different alternatives of Aquifer Thermal Energy Storage (ATES) were employed to meet the heating/cooling demands of the buildings. These alternatives were using ATES for: Cooling alone, heating alone by coupling with at-plate solar collectors, and cooling and heating by coupling with a heat pump. For the economic evaluation of the... 

In this research, a confined aquifer with low groundwater flow was considered to meet the cooling and heating requirements of residential complexes. The complexes were located in the cities of Ahvaz, Ardabil, Bandar Abbas, Esfahan, Kerman, Rasht, Tehran, and Zahedan. The complex in Ardabil mostly required heating, the ones in Ahvaz and Bandar Abbas mostly required cooling, and the complexes in other cities required both heating and cooling. Four different alternatives of Aquifer Thermal Energy Storage (ATES) were analyzed in this study. These alternatives consisted of using ATES: 1) alone for cooling, 2) coupled with a conventional refrigeration system or a chiller for cooling, 3) by... 

In this research, a confined aquifer with low groundwater flow was considered to meet the cooling and heating requirements of residential complexes. The complexes were located in the cities of Ahvaz, Ardabil, Bandar Abbas, Esfahan, Kerman, Rasht, Tehran, and Zahedan. The complex in Ardabil mostly required heating, the ones in Ahvaz and Bandar Abbas mostly required cooling, and the complexes in other cities required both heating and cooling. Four different alternatives of Aquifer Thermal Energy Storage (ATES) were analyzed in this study. These alternatives consisted of using ATES: 1) alone for cooling, 2) coupled with a conventional refrigeration system or a chiller for cooling, 3) by... 

Multigeneration systems (MGSs) driven by renewable sources are proved as cutting-edge technologies for multiple productions purposes to curb greenhouse gas emissions. With this regard, a novel geothermal-based MGS is proposed to produce multiple commodities of cooling, heating, power, and hydrogen, simultaneously, using liquefied natural gas (LNG) as cold energy recovery. The system is composed of an organic Rankine cycle (ORC), an ejector refrigeration cycle (ERC), an LNG power generation system, and a proton exchange membrane (PEM) electrolyzer system. To demonstrate the feasibility of the proposed MGS, energy, exergy, and exergoeconomic analysis are employed as the most effective tools... 

Feasibility investigation of a humidification dehumidification (HDH) desalination system driven by an absorption-compression heat pump cycle (ACHPC) is carried out in this paper. The proposed hybrid desalination system uses both heating capacity of the discharged brine as a waste heat for the ACHPC and mechanical power of the ACHPC for the HDH system. The system's performance is investigated under different optimal design modes, using genetic algorithm (GA) as the most robust tool for optimization. A steady-state mathematical model based on the mass, energy, exergy, and exergoeconomic balance equations for components of the proposed system is developed and the predicted results are validated... 

Cooling production at different temperature levels for various applications has been highlighted in recent years since the produced cooling capacity must be used for different applications to meet all subjects’ demands. For this purpose, a novel dual-loop bi-evaporator vapor compression refrigeration cycle is proposed to meet these demands for freezing and air-conditioning applications which can be employed in building sectors. Later, ejector expander is used in place of the expansion valve in the proposed refrigeration system to enhance the performance of this basic system based on the thermodynamics and thermoeconomics viewpoints. Four working fluids of R717, R290, R600a, and R134a are... 

Hybrid renewable energy heat sources provide more sustainable energy resources with high maintenance for high-efficient power plants. Multigeneration systems driven by a hybrid renewable source are proved as cutting-edge technologies in recent studies. In this study, a novel multigeneration system driven by a hybrid biogas-geothermal heat source is proposed and simulated. To demonstrate the feasibility of the proposed multigeneration system, first and second laws analysis are employed as the most effective tools for performance assessment of the systems. It is found that the proposed multigeneration system can produce overall heating capacity, overall cooling capacity, net output power,... 

This paper deals with reconstruction of conventional combined cooling and power (CCCP) cycle for producing simultaneous power and cooling outputs for triple applications of freezing, refrigeration and air-conditioning. The proposed systems are integrated from organic Rankine cycles (ORCs) and an ejector refrigeration cycle (ERC). Single- and multi-objective optimisations of the proposed systems are conducted from energy, exergy and exergoeconomic viewpoints, using genetic algorithm (GA). The results of optimisation revealed that the thermal efficiency of the basic triple-evaporator CCP (B-TECCP) and regenerative TECCP (R-TECCP) systems can be improved by 7.48% and 6.23%, respectively,... 

Hybridization of biogas and geothermal energies for power plants can present a promising way to resolve drawbacks of each individual heat source from economic viewpoint, especially when low-temperature geothermal heat source is posited. Concerning this aspect of hybrid renewable heat sources, a novel hybrid biogas-geothermal multigeneration system was proposed in the first part of our study, which was modeled under privilege of thermodynamic laws. In continuation of our previous study, the current study is performed to investigate economic, environmental, and enviroeconomical aspects of the introduced system. Furthermore, single and multi-criteria optimizations of this integrated system are... 

In this paper energy, exergy and thermoeconomic analysis of a combined cooling, heating and power (CCHP) system has been performed. Applying the first and second laws of thermodynamics and economic analysis, simultaneously, has made a powerful tool for the analysis of energy systems such as CCHP systems. The system integrates air compressor, combustion chamber, gas turbine, dual pressure heat recovery steam generator (HRSG) and absorption chiller to produce cooling, heating and power. In fact, the first and second laws of thermodynamics are combined with thermoeconomic approaches. Next, computational analysis is performed to investigate the effects of below items on the fuel consumption,... 

Four 5-, 10-, 20- and 30-story moment frames, representing low-, mid-, and two high-rise structures, were subjected to a great number of idealized directivity pulses. The amplitudes and periods of pulses vary from 0.02 g to 1.0 g and 0.5 to 12 sec, respectively. Over 1400 nonlinear dynamic analyses of low- to high-rise moment frames were performed which were feasible through using modified fish-bone model. The distribution of interstory drift along the height was studied and two applied contours were proposed: (i) the maximum interstory drift contour, and (ii) the critical story contour. These contours were demonstrated versus the ratio of natural period of the structure to the pulse period... 

In this article singular points of a parallel manipulator are obtained based on a novel geometrical method. Here we introduce the constrained plain method (CPM) and some of its application in parallel mechanism. Given the definition of constraint plane (CP) and infinite constraint plane (ICP) the dependency conditions of constraints is achieved with the use of a new theorem based on the Ceva geometrical theorem. The direction of angular velocity of a body is achieved by having three ICPs with the use of another theorem. Finally, with the use of the above two novel theorems singularities of the 3UPF_PU mechanism are obtained. It should be emphasized that this method is completely geometrical,... 

An analytical model is proposed to study the effect of particle size on melting enthalpy and entropy of metallic nanoparticles (NPs). The Mott's and Regel's equations for melting entropy in the combination of core average coordination number (CAC) and surface average coordination number (SAC) of freestanding NPs are considered. Clusters of icosahedral (IC), body centered cubic (BCC), and body centered tetragonal (BCT) structure without any vacancies and defects are modeled. Using the variable coordination number made this model to be in good agreement with experimental and molecular dynamic (MD) results of different crystal structures. The model predicts melting entropy and enthalpy of... 

Grinding is widely used for manufacturing of components that require fine surface finish and good dimensional accuracy. In this study a thermo-mechanical finite element analysis is conducted to find out how grinding parameters can affect temperature and residual stress distribution in the workpiece. Results of parametric study presented in this work indicate, by carefully selecting the grinding parameters, minimum thermal and mechanical damage can be achieved. Higher workpiece velocities produce higher surface residual stress. By increasing depths of cut, depth of tensile residual stresses increases. Convection heat coefficient does not have any considerable effect on surface residual stress... 

Adaptive Noise Cancellation (ANC) is a well-known technique for background noise reduction in automobile and vehicular environments. The noise fields in automobile and other vehicle interior obey the diffuse noise field model closely. On the other hand, the ANC does not provide sufficient noise reduction in the diffuse noise fields. In this paper, a new multistage post-filter is designed for ANC as a solution to diffuse noise conditions. The designed post-filter is a single channel Linear Prediction (LP) based speech enhancement system. The LP is performed by an adaptive lattice filter and attempts to extract speech components by using intermediate ANC signals. The post-filter has no...