Sharif Digital Repository

Recently, it was shown that half BPS Supergravity solution of theories with SU(2|4) symmetry algebra is given uniformly by determining a single function which obeys three dimensional continuous Toda equation. In this paper, we study the scale invariant solution of Toda equation. Our motivation is that some solutions of half BPS sector of IIB supergravity, as one excepts from the fermion description of the theory, are scale invariant. By defining two auxiliary functions we prove that such solutions of Toda equation obey cubic algebraic equation. We obtain some simpl solutions of Toda equation specially, we observe that the PP-wave solution can be written in this fashion. © SISSA 2006  

In this paper, we study the generation of a large scale magnetic field with amplitude of order μG in an inflationary model which has been introduced in [1]. This inflationary model based on existence of a speed limit for inflaton field. Generating a mass for inflaton at scale above the φIR, breaks the conformal triviality of the Maxwell equation and causes to originate a magnetic field during the inflation. The amplitude strongly depends on the details of reheating stage and also depends on the e-foldings parameter N. We find the amplitude of the primordial magnetic field at decoupling time in this inflationary background using late time behavior of the theory. © SISSA 2005  

A chemiresistive sensor is described for the lung cancer biomarker hexanal. A composite consisting of molecularly imprinted polymer nanoparticles and multiwalled carbon nanotubes was used in the sensor that is typically operated at a voltage of 4 V and is capable of selectively sensing gaseous hexanal at room temperature. It works in the 10 to 200 ppm concentration range and has a 10 ppm detection limit (at S/N = 3). The sensor signal recovers to a value close to its starting value without the need for heating even after exposure to relatively high levels of hexanal  

Pulse laser ablation (PLA) technique has been demonstrated to be a simple, compatible, promising, versatile, relatively low-cost, pure, and green approach with the absence of toxic chemicals and reagents for fabrication of metal nanoparticles. Purity is an especially important attribute of metal nanoparticles (NPs) in biological and medical technologies. For such applications, it is crucial to prepare metal NPs with the desired shape and size distribution. This chapter discusses the advantages of the PLA technique as compared with other techniques for metal NPs, explains the various mechanisms involved in the generation of metal NPs, outlines the effects of laser parameters, such as... 

Nanosecond lasers of different intensities were pulsed into sputter-deposited amorphous thin films of near equiatomic Ni/Ti composition to produce partially crystallized highly sensitive R-phase spots surrounded by amorphous regions. Scanning electron microscopy having secondary and back-scattered electrons, field emission scanning electron microscopy, optical microscopy and X-ray diffraction patterns were used to characterize the laser treated spots. Effect of nanosecond pulse lasering on microstructure, morphology, thermal diffusion and inclusion formation was investigated. Increasing beam intensity and laser pulse-number promoted amorphous to R-phase transition. Lowering duration of the... 

A graph is said to be uniquely list colorable, if it admits a list assignment which induces a unique list coloring. We study uniquely list colorable graphs with a restriction on the number of colors used. In this way, we generalize a theorem which characterizes uniquely 2-list colorable graphs. We introduce the uniquely list chromatic number of a graph and make a conjecture about it which is a generalization of the well-known Brooks' theorem. © 2002 Elsevier Science B.V  

Existing load balancing solutions rely on direct or indirect measurement of rates (or congestion) averaged over short periods of time. Sudden fluctuations in flow rates can lead to significant undershooting/overshooting of target link loads. In this paper, we make the case for taking variations and correlations of flows into account in load balancing. We propose correlation-aware flow consolidation, i.e. aggregating inversely correlated (or uncorrelated) flows into superflows and using them as building blocks for load balancing. Superflows are smoother than individual flows, and thus are easier to estimate with a higher confidence, and can reduce overshooting/undershooting of link... 

In this study, the main focus was on designing and synthesizing a novel magnetic nanobiocomposite and its application in hyperthermia cancer treatment. Regarding this aim, sodium alginate (SA) hydrogel with CaCl2 cross-linker formed and modified by silk fibroin (SF) natural polymer and halloysite nanotubes (HNTs), followed by in situ Fe3O4 magnetic nanoparticles preparation. No important differences were detected in red blood cells (RBCs) hemolysis, confirming the high blood compatibility of the treated erythrocytes with this nanobiocomposite. Moreover, the synthesized SA hydrogel/SF/HNTs/Fe3O4 nanobiocomposite does not demonstrate toxicity toward HEK293T normal cell line after 48 and 72 h.... 

A novel and high potent magnetic nanobiocomposite was prepared based on Carboxymethyl cellulose (CMC) and epichlorohydrin (ECH) cross-linker interactions to form a three-dimensional cross-linked CMC hydrogel followed by silk fibroin (SF) and halloysite nanotubes (HNTs) modifications and further in situ Fe3O4 magnetic nanoparticles (MNPs) formation. Different analytical techniques like FT-IR, EDX, FE-SEM, XRD, TGA, and VSM were used to characterize the structure of the prepared nanobiocomposite. The spherical morphology of Fe3O4 MNPs and tubular HNTs were presented in the FE-SEM images. In biological tests, since the hemolysis percent was even less than the negative control, the CMC... 

We introduce highly antifouling Polymer-Nanoparticle-Nanoparticle/Polymer (PNNP) hybrid membranes as multi-functional materials for versatile purification of wastewater. Nitrogen-rich polyethylenimine (PEI)-functionalized halloysite nanotube (HNT-SiO2-PEI) nanoparticles were developed and embedded in polyvinyl chloride (PVC) membranes for protein and dye filtration. Bulk and surface characteristics of the resulting HNT-SiO2-PEI nanocomposites were determined using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). Moreover, microstructure and... 

Hyperbranched polyethyleneimine functionalized silica (PEI-SiO2) nanoparticles with considerable hydrophilicity were synthesized and incorporated into a polysulfone (PSF)/dimethylacetamide (DMA)/polyvinylpyrrolidone (PVP) membrane casting solution in five different ratios to fabricate PEI-SiO2/PSF nanocomposite membranes using nonsolvent-induced phase separation. The hydrophilic PEI-SiO2 nanoparticles were characterized by TEM, FTIR, TGA, and XPS analyses. Morphology, water contact angles, mean pore sizes, overall porosity, tensile strengths, water flux, antifouling and the dye separation performances of the PEI-SiO2/PSF membranes were also studied. The PEI-SiO2 nanoparticles were uniformly... 

In this paper, we study theoretically the generation of high repetition rate short pulses using fiber optical parametric amplification. We show that the pulse shape and duration depend on the signal location relatively to the pump frequency. We demonstrate that in order to get the shortest pulse width, the signal must be located at one of the extremities of the gain spectrum associated with the pump peak power. We derive the analytical expression of the pulse shape in this case and compare it to the exponential gain regime case. Using numerical simulations, we also analyze the impact of walk-off and pump phase modulation that is required to suppress Stimulated Brillouin Scattering and derive... 

This paper reports a polarization controllable and angle-insensitive perfect metamaterial absorber (PMA). The proposed PMA consists of periodically arranged asymmetric omega-shaped resonators made of metallic copper. The absorptivity was analyzed considering the microwave C-band from 4 GHz to 8 GHz. The proposed PMA shows an absorption peak with almost 100% absorptivity at 6.2 GHz. Also, wideband negative index of refraction is observed. Further, the absorber is inspected for the different rotation angles of the top metasurface (omega-shaped ring) along the optical axis, and obliquity of incidence angle for both TE and TM polarized waves. Moreover, surface electric field and surface current... 

Recent research efforts were made to investigate botanical bactericides as an intervention tool for citrus canker. Five botanical extracts (Eruca vesicaria, Eucalyptus globulus, Trigonella foenum-graecum, Nigella sativa, and Citrullus colocynthis) were evaluated at three different concentrations (0.25%, 0.5%, and 0.75%) against Xanthomonas citri pv. citri under in vitro conditions. Among all treatments, two effective plant extracts, alone and in combinations, were assessed at three different time points (7 days, 14 days, 21 days) under greenhouse conditions. In vitro and greenhouse experiments were conducted under a Completely Randomized Design. Results showed that C. colocynthis expressed... 

In cloud computing, services play key roles. Services are well defined and autonomous components. Nowadays, the demand of using Fuzzy inference as a service is increasing in the domain of complex and critical systems. In such systems, along with the development of the software, the cost of detecting and fixing software defects increases. Therefore, using formal methods, which provide clear, concise, and mathematical interpretation of the system, is crucial for the design of these Fuzzy systems. To obtain this goal, we introduce the Fuzzy Inference Cloud Service (FICS) and propose a novel discipline for formal modeling of the FICS. The FICS provides the service of Fuzzy inference to the... 

The mixed nano-ferrites materials Cu0.6Zn0.4HoxFe2−xO4 (0.00 ≤ x ≤ 0.12) were prepared via the sol–gel auto combustion technique. The TGA curve established the annealing temperature (500 °C) for phase formation. The single exothermic peak on the DSC plot occurred at 341 °C temperature. XRD patterns of these nano ferrites verified single phase formation of the FCC cubic structure. The lattice constant a was increased from 8.4244 to 8.4419 Å and then its value decreased to 8.4319 Å. Crystallite size was found in the range of 7 to 16 nm. The surface morphology of the samples was observed from the scanning electron microscope (SEM) images. The grain size was found within the range of 90 nm to... 

The mixed nano-ferrites materials Cu0.6Zn0.4HoxFe2−xO4 (0.00 ≤ x ≤ 0.12) were prepared via the sol–gel auto combustion technique. The TGA curve established the annealing temperature (500 °C) for phase formation. The single exothermic peak on the DSC plot occurred at 341 °C temperature. XRD patterns of these nano ferrites verified single phase formation of the FCC cubic structure. The lattice constant a was increased from 8.4244 to 8.4419 Å and then its value decreased to 8.4319 Å. Crystallite size was found in the range of 7 to 16 nm. The surface morphology of the samples was observed from the scanning electron microscope (SEM) images. The grain size was found within the range of 90 nm to... 

In the study presented herein, a simple method for laboratory calcite cementation of a reconstituted gravelly sand was presented. This method was used to prepare cemented gravelly sand specimens, which have similar natural characteristics to alluvial deposit of the city of Tehran. The formation and distribution of calcite bonds, as well as the effectiveness of the presented calcite cementation method in increasing interparticle cohesion, as observed in weakly to moderately cemented soil in Tehran, were evaluated by means of chemical analysis, X-ray diffraction technique, and unconfined compressive strength tests. The cementation technique was used to prepare triaxial specimens with calcite... 

Machine-to-Machine (M2M) communication is an important type of communication in the Internet-of-Things (IoT). How to send data in these high-density communications using relay selection can help improve the performance of this type of communication in various applications. In addition, the possibility of simultaneous use of different Radio Frequency (RF) interfaces helps to use the spectrum more efficiently. In this work, we try to further use machine communication RF equipment and improve the average data rate of networks in some applications such as the IoT, which have their own bandwidth requirements. Therefore, we provide an optimization algorithm for relay selection as well as the...