Sharif Digital Repository

In the present work, micro-climate control of a fan-ventilated tunnel greenhouse with evaporative cooling is investigated via simulation study. For this purpose, the adaptive generalized predictive control (AGPC) strategy is adopted to control temperature, relative humidity, and CO2 concentration in the greenhouse on extremely hot summer days. A dynamic model which integrates a distributed model of greenhouse micro-climate with a crop growth model is used for numerical simulation of the tunnel greenhouse. The controller performance is analyzed via numerical simulation. The relative gain array analysis confirms that greenhouse micro-climatic parameters are highly interactive. However,... 

We proposed a personalized bolus advisor for patients with type 1 diabetes (T1D). A bolus advisor is a decision support system that recommends insulin doses based on an open-loop model-based optimization. To construct the bolus advisor, the optimal open-loop control of blood glucose (BG) concentration in T1D patients was represented as a multi-objective optimization problem. The insulin types, doses, and times for each injection were provided by the bolus advisor based on a personalized model and an average daily diet, which should be re-tuned frequently in specific time intervals. The constructed personalized model for T1D patients incorporates effects of the patient's age and body weight.... 

A continuous-discrete Distributed and Decentralized Switching Kalman Filter (DDSKF) is designed for estimation of spatial profiles in Pressure Swing Adsorption (PSA) processes. The introduced observer is an integral part of the control strategy of hybrid systems in general and PSA systems in particular. A reduced order model is developed based on the mechanistic model of the process. The sensors are optimally located and observability of the process is studied. The proposed observer is used to estimate the spatial profiles of various states of a two-bed, six-step PSA system used for production of pure H2 from a H2–CH4 gas mixture. The spatial profiles of the system have been estimated using... 

As an integral part of a hybrid control system for Pressure Swing Adsorption (PSA) processes, a dynamical hybrid observer is proposed for online reconstruction of the active mode and continuous states of these processes. Hybrid systems feature both continuous and discrete-event dynamics and hence are very suited to describe PSA processes. For estimation of the active mode, a mode observer is designed, and the continuous spatial profiles in each mode are estimated by distributed and decentralized Kalman filters. The proposed hybrid observer has been applied, in silico, for a two-bed, six-step PSA process used for Hydrogen purification. The active mode of the process along with the continuous... 

Transmission of natural gas from its sources to end users in various geographical locations is carried out mostly by natural gas transmission pipeline networks (NGTNs). Effective design and operation of NGTNs requires insights into their steady-state and, particularly, dynamic behavior. This, in turn, calls for efficient computer-aided approaches furnished with accurate mathematical models. The conventional mathematical methods for the dynamic simulation of NGTNs are computationally intensive. In this paper, the use of autoregressive neural networks for cost-effective dynamic simulation of NGTNs is proposed. Considering the length, diameter, roughness, and elevation as the main... 

A dynamical hybrid observer is proposed for online reconstruction of the active mode and continuous states of Pressure Swing Adsorption (PSA) processes as an integral part of a hybrid control system. A mode observer is designed for estimation of the active mode, and the continuous spatial profiles are estimated by a Distributed and Decentralized Switching Kalman Filter. The proposed hybrid observer has been applied, in silico, for a two-bed, six-step PSA process. The active mode of the process along with the continuous spatial profiles of its adsorption beds have been estimated quite accurately based on very limited number of noise corrupted temperature and pressure measurements. © 2017  

The aim of this paper is to synthesize a hybrid controller for pressure swing adsorption (PSA) processes. Since the process is described by a set of partial differential algebraic equations, first a local reduced-order model (LROM) for the process is developed and is formalized as a hybrid system. A hybrid controller is designed for purity control of the process in the presence of external disturbances by determining the maximal safe set of the LROM. A hybrid backward reachability analysis is performed for this purpose. Considering a realistic scenario for PSA processes where the states are not available and the number of measurement sensors is very limited, the desired states are estimated... 

In this paper we propose a method towards purity control of pressure swing adsorption (PSA) processes which is based on the use of hybrid systems formalism. Hybrid systems feature both continuous and discrete-event dynamics and hence are very suited to describe in detail PSA processes. Based on mechanistic model of the processes, a local reduced-order model (LROM) is developed for PSA processes. Then the processes are represented as hybrid systems whose continuous evolution is described by the LROM. We then perform an analysis of hybrid reachability properties of the hybrid system obtained, based on which the so-called maximal safe set is computed. The analysis is performed for a two-bed,... 

A hybrid controller is proposed for Pressure Swing Adsorption (PSA) processes. Since the process is described by a set of Partial Differential Algebraic Equations (PDAE's), first a Local Reduced Order Model (LROM) for the process is developed and then it is formalized as a hybrid system. A controller is designed for purity control of the process in the presence of external disturbances, by determining the maximal safe set of the LROM. Hybrid backward reachability analysis is performed for this purpose. The controller is designed and applied to a two-bed, six-step PSA process whose dynamical behavior is simulated by a full-order principle-based model of the process. Excellent performance of... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared