Sharif Digital Repository

Ultra-high temperature ceramics (UHTCs) are a class of materials that have melting points above 3000°C and include borides, carbides and nitrides of some transition metals such as ZrB2, ZrC, HfB2, HfC, HfN, TaC. These compounds are of particular interest because of the unique property combination such as high electrical and thermal conductivity, chemical inertness against molten metals or non basic slags, and good thermal shock resistance. Sintering of these compounds is very difficult due to their high melting point and utilization of sintering aids or new consolidation routes is necessary to achieve high density sintered bodies. In this research, phase evolution and kinetics of diffusion... 

Based on the latest statistical figures, more than 50 billion Rials worth of medical equipment exists in Iran’s medical centers. In spite of this, Breakdown maintenance is used in all hospitals, which means that the equipment is utilized as long as it is not out of order and only in such a situation, i.e. a breakdown, the necessary repair operation is conducted on the equipment. In fact, no maintenance is carried out to prevent a breakdown, while the “prevention from breakdown” concept has long been introduced in the majority of industries in many countries including Iran and its positive impacts are undisputable. This thesis aims at proposing a solution for the implementation of a “planned... 

Modern communication systems,while demanding high power efficiency, suffer from the inherent nonlinearty effects. Such a problem becomes more critical in LEO satellites, in which there are fundamental power limitations. Considering that the main source of nonlinear effects are power amplifiers, one of the most common methods to improve signal quality in a transmitter, meanwhile maintaining power efficiency, is to utilize linearization techniques for power amplifiers. This project consists of two parts. The first is to design and fabricate a power amplifier for the desired frequency (2.4 GHz) and power requirements (3 W). The other is design and fabrication of a linearizer and matching it to... 

Concrete is the second most structural material in the world. So attention and promotion of the concrete mix design with respect to variable issues and requirements, is very important. On the other hand, these days environment and its pollution has become very popular discussion. Waste-glass which is produced by human products is one of the environmental pollutants. In this thesis it replaces some aggregate in concrete and it can reduce the level of this material in the world. Also we study effects of silica-fume as cement replacement and properties enhancer in our concrete mix design and see how it can ... 

In this thesis the attitude dynamics, simulation and control of a flexible satellite with CMG (Control Moment Gyro) actuator in three-dimensional slew and rest-to-rest maneuvers have been studied. The flexible satellite is modeled as a rigid hub and two flexible appendages. The bending and torsion of the flexible panels have been considered. The equations of motion have been derived using the Lagrange method and assumed-modes approach is utilized for converting the partial differential equations of structural dynamics into an ordinary differential equation set. The MATLAB and SIMULINK software has been used for simulation and validation of the equations of motion. The simulation and control... 

Nowadays the combination of mechanical and electronic systems in small scales is gaining attention. Micro electro-mechanical systems are widely used in various industries such as car manufacturing and electronic chips. In these devices, the most important and useful mechanical structures are beams and plates. Therefore, investigating the mechanical properties of these structures in very small scales (micro and nano) is of great importance. Decreasing the size to these scales leads to the dependence of the behavior of these structures to size. Accordingly, some theories for prediction of these behaviors have been presented, one of which is the strain gradient theory. This theory is used in... 

Government intervention in markets may go beyond the market regulation. Interventions may cause some idiosyncratic price distortions. It means the relative prices of factors to become different among firms. Therefore, micro conditions for firms will be changed. These will result in misallocation of factor production between firms and change in manufacturing TFP. According to data from about 14000 medium and small industrial firms in Iran, removing misallocation of production factors (capital and energy) and output idiosyncratic distortions between industrial firms would result in 115 percent increase in manufacturing TFP.

 

The purpose of this research is the extraction of socio-economic factors (separation of household and household members) that affect the use of banking services in urban area of Iran. In this study we used data of the "family access to financial services in urban areas of Iran in 1387" that has been sampled by the department of economic statistics of central bank of Iran. The statistical information of this organization is in form of completed questionnaires and based on household addresses in a city and contains of 6055 urban household's information. In this project 15922 persons have been studied in urban households include the caretaker and the other family members. In addition to... 

Due date assignment for customer orders has been studied in various production environments. In this thesis a production system is considered in which the orders of several customers are produced in a single lot because of the economy of scale. If a lot is completed before receiving customer orders, inventory carrying cost is incurred. On shortages, a due date is quoted to customers and lead time quotation cost is incurred. The due date may not be met because of (lead-time) uncertainty in production system. Hence if the order is delivered after its due date, tardiness cost is charged. The literature reviews show that such a model is not considered by other researchers. Two different problems... 

A hierarchical production system in make-to-order environment is presented in this thesis. This production system is consisted of three different decision making levels. Maximum acceptance for production within customer specified time interval was done in the first stage, which is called order arriving stage, based on different client criteria, type of demanded product, and production system constraints. A new hierarchical decision making structure for accepting or rejecting arriving orders is proposed in this level. The output of this acceptance level is orders having maximum production system defined criteria, and minimum production cost along with order delivery time with minimum delay is... 

The study on the propane dehydrogenation process has been receiving significant attention due to the growing demand for propylene. The aim of this research is to develop an appropriate kinetic mechanism for dehydrogenation of propane over an industrial Pt–Sn/γ-Al2O3 catalyst in the presence of a very small amount of water. The reaction is carried out over the temperature range of 575 – 620 º C at atmospheric pressure. The results showed that a small amount of water and methanol can improve the performance of catalyst and also, increase the selectivity to COx. Addition the 0.5, 0.45, 0.3 water and 0.1, 0.05, 0.02 methanol are the optimum amount of these oxygenated compounds in order at... 

In recent years in assembly line balancing area many researchers have focused on identifying and modeling real world situations in assembly lines in order to obtain more suitable model. As a result many generalized models have been developed in assembly line balancing area. However, designing efficient algorithms to solve these generalized problems has just begun. In this study it is aimed to design efficient algorithms to solve one of these generalized problems. Specificcally two hybrid genetic algorithms (GA) are proposed to solve assembly line balancing problem with sequence dependent setup times. Scheduling of tasks in the stations has been less considered in the literature of assembly... 

In this thesis, a multi-stage project portfolio selection and scheduling problem in an uncertain environment is modeled, analyzed and solved. Moreover, we investigate the situations in which a project manager is confronted to a large number of projects to be selected and scheduled while the required resources of the projects are limited and renewable. The aim is to maximize objective function which is the net present value of the profit of the projects. To solve the mentioned problem, we introduce a multi-stage stochastic programming. For the reason that, in real problems, optimization problems that included all restraints are large scale and have computational complexity, these problems are...