Sharif Digital Repository

Very fine alumina nanoparticles were loaded in novolac type phenolic resin (PF) using solution mixing method. The concentration of nanoalumina in PF was varied between 2.5 to 20 wt%. All the compounds were compression molded and then subjected to scanning electron microscopy (SEM), tensile, flexural, and dynamic mechanical analysis (DMA) tests. SEM analysis showed that the nanoalumina were dispersed uniformly at low concentrations, however, at high concentrations, dispersion was suppressed leading to agglomerates in the composites. Mechanical testing revealed that the nanoalumina had a great influence on the strength and stiffness of PF resin particularly at concentrations below 5 wt%.... 

In this study, the authors propose an analytical model to evaluate the maximum stable throughput for unicast services in vehicular ad hoc networks. In this respect, the authors employ two queueing networks (QNs) to model the mobility patterns of the vehicles as well as the multi-hop packet transmission scenario. In the proposed model, the authors map the features of IEEE 802.11, as well as the details of multi-hop packet transmission, regarding the dynamic status of vehicles, onto suitable parameters of the QNs. In the authors' modelling approach, they take the details of MAC and routing schemes into account by classifying the vehicles based on their mobility patterns and considering their... 

Single-walled carbon nanotubes (SWCNTs) and multiwalled carbon nanotubes (MWCNTs) were synthesized in aqueous solutions containing FeCl2, FeCl3, FeSO4 and Fe2(SO4)3. The effects of iron charge and the counter ions on the formation of carbon nanotubes (CNTs) were investigated. Thermogravimetric (TG) analysis indicated that carbon multilayer structures including CNTs and multishell graphite particles were formed in deionized (DI) water without the iron precursor. SWCNTs were also synthesized in the presence of the iron ions. It was also found that the mole ratio of [Fe2+]/[Fe3+] in the solution has a significant influence on the purity of CNTs and the process yield. The highest yield was... 

Nowadays there are more than thirty maturity models in different knowledge areas. Maturity model is an area of interest that contributes organizations to find out where they are in a specific knowledge area and how to improve it. As Information Resource Management (IRM) is the concept that information is a major corporate resource and must be managed using the same basic principles used to manage other assets, assessment of the current IRM status and reveal the improvement points can play a critical role in developing an appropriate information structure in organizations. In this paper we proposed a framework for information resource management maturity model (IRM3) that includes ten best... 

This paper presents a new mechanism with unique and prominent features for a helical swimmer robot. "Double Helices Propulsion Mechanism" consists of two parallel helices with a single axis rotating in the same direction. The outer helix acts as the main propulsion component, and the inner helix, which is made of a Shape Memory Alloy (SMA), controls the forward velocity during swimming. This mechanism, by varying the geometrical parameters of its helical tail, can change the forward velocity of the helical swimmer robot that is required by its predefined missions. In order to study the effects of geometric parameters on the forward velocity in the single helical swimmer, a hydrodynamic model... 

Few works has been focused on the problem of joint distributed data compression and network coding. In this paper we give some examples showing the advantage of broadcast nature of wireless environment as a basis for joint codes design. Also we show that joint coding is possible in the case of multiple unicasts. The idea of this paper can be exploited in an opportunistic manner. Actually, the foundation of our idea is nothing but combining opportunistic network coding (COPE) and distributed source coding using syndromes (DISCUS) for wireless applications. © 2009 IEEE  

Data Envelopment Analysis (DEA) is a method to measure the efficiency of a DMU (Decision Making Unit, e.g. school, public agencies and banks). One of the ways for determining rank of DMUs is efficient score of each DMU. An interesting research issues is to discriminate between efficient DMUs. In literatures, supper efficiency is an applicable method for ranking efficient DMUs. The main drawback of this method is an inability of this method to rank non-extreme efficient DMUs. Therefore, this issue reduces the usefulness of this method. In this paper we propose a new ranking system for non-extreme efficient DMUs (Decision Making Units) based upon the omission of DMUs from reference set of the... 

The purpose of this paper is to present a polynomial time algorithm which determines the lot sizes for purchase component in Material Requirement Planning (MRP) environments with deterministic time-phased demand with zero lead time. In this model, backlog is not permitted, the unit purchasing price is based on the all-units discount system and resale of the excess units is possible at the ordering time. The properties of an optimal order policy are argued and on the basis of them, a branch and bound algorithm is presented to construct an optimal sequence of order policies. In the proposed B&B algorithm, some useful fathoming rules have been proven to make the algorithm very efficient. By... 

This paper approaches the topic of protection system reliability from an economic point of view by 1) designing an optimal modern protective relay based on a prescribed level of reliability subject to economic constraints and 2) determining optimal routine test intervals by balancing the cost of routine tests and losses due to relay failure. This paper proposes a method that enables the designer to optimally select hardware and software components of a digital protective relay to gain the highest possible overall reliability with a restricted budget. This design can be viewed as a reliability and redundancy allocation problem for which a new easy-to-implement algorithm is proposed. In... 

Protective relay technologies have evolved from single-function electromechanical and static relays to modern multifunction digital relays over the past few years. Protection systems play a vital role in maintaining a desirable level of reliability in power systems. Thus, their own reliability should be evaluated and any cause of their malfunction should be fully comprehended. In this paper, a new reliability model is proposed that associates protection system failures to four main causes: 1) relay hardware, 2) relay software, 3) ancillary equipment, and 4) human error. In addition, this model can take other aspects of the protection system into consideration, such as human error during... 

Brake friction materials filled with nanoalumina were produced by both conventional and solvent-assisted mixing methods. It was shown that nanoalumina loading led to the reduction of friction coefficient and improvement in mechanical, wear and thermal behaviors. Such behavior was attributed to the role of nanoalumina in producing stable friction layer and easy conduction path in matrix. It was postulated that nanoalumina is able to attach on the surface of microalumina facilitating the rolling of microalumina at interface. Solution-processed samples exhibited lower improvement in tribological and mechanical properties compared to the conventional mixing due to the limited interaction between... 

Protective relay technologies have evolved from single-function electromechanical and static relays to modern multifunction digital relays over the past few years. Protection systems play a vital role in maintaining a desirable level of reliability in power systems. Thus, their own reliability should be evaluated and any cause of their malfunction should be fully comprehended. In this paper, a new reliability model is proposed that associates protection system failures to four main causes: 1) relay hardware, 2) relay software, 3) ancillary equipment, and 4) human error. In addition, this model can take other aspects of the protection system into consideration, such as human error during... 

We study drag reduction of a uniform flow over a flat surface due to a series of rectangular microgrooves created on the surface. The results reveal that making grooves on the surface usually leads to the generation of secondary vortices inside the grooves that, in turn, decreases the friction drag force and increases the pressure drag force. By increasing the thickness of the grooves to the thickness of the obstacle, the pressure drag increases due to the enhancement of the generated vortices and the occurrence of separation phenomenon and the friction drag reduces due to a decrease of the velocity gradient on the surface. In addition, by increasing the grooves depth ratio, the pressure... 

The protection system plays a vital role in maintaining a high degree of service reliability in present-day power systems. Considerable work has been done to examine different aspects of protection systems and their associated reliability. All of the reliability predictive methods are based solely on equipment failures, neglecting the human component of the protection system. In this paper, a modified Markov model is presented that incorporates human errors in reliability evaluation of protective devices. Two main types of relay failure (failure to operate and inadvertent operation) are taken into account in the proposed model. The model also considers routine test inspections, the... 

Failure statistics of most utilities indicate that distribution systems make the greatest individual contribution to the unavailability of supply to customers. Optimal capacitor placement in distribution systems has a number of advantages such as reducing losses, improving voltage profile, improving power factor and so on. The conventional objective function of the optimal capacitor placement consists of the total cost of losses and investments. Since capacitors supply reactive loads locally, they improve the load-carrying capability of the lines and therefore play the same role as redundant lines. Thus, optimal capacitor placement can also improve the reliability indices of a distribution... 

High-impedance faults (HIFs) on distribution systems create unique challenges to protection engineers. HIFs do not produce enough fault current to be detected by conventional overcurrent relays or fuses. A method for HIF detection based on the nonlinear behaviour of current waveforms is presented. Using this method, HIFs can be distinguished successfully from other similar waveforms such as nonlinear load currents, secondary current of saturated current transformers and inrush currents. A wavelet multi-resolution signal decomposition method is used for feature extraction. Extracted features are fed to an adaptive neural fuzzy inference system (ANFIS) for identification and classification.... 

In this study, the effects of pulse current parameters on corrosion resistance and mechanical properties of anodized coatings were evaluated. Hardness measurements, polarization and electrochemical impedance spectroscopy tests were employed to investigate the mechanical properties and corrosion behavior of these coatings. Also, field emission scanning electron microscopy (FE-SEM) was used to analyze the surface morphology and microstructure of the coatings. It was found that the properties of anodized coatings were dependent on various parameters, among which, time, temperature and pulse current parameters (current density limit, frequency and duty cycle) were optimized. Analysis of Variance... 

Calculation of camera projection matrix, also called camera calibration, is an essential task in many computer vision and 3D data processing applications. Calculation of projection matrix using vanishing points and vanishing lines is well suited in the literature; where the intersection of parallel lines (in 3D Euclidean space) when projected on the camera image plane (by a perspective transformation) is called vanishing point and the intersection of two vanishing points (in the image plane) is called vanishing line. The aim of this paper is to propose a new formulation for easily computing the projection matrix based on three orthogonal vanishing points. It can also be used to calculate the...