Sharif Digital Repository

TNT: Silicon microcantilevers modified with a three-dimensional layer of vertical titanium dioxide nanotubes can be used in micromechanical sensors with optical signal detection to detect low levels of explosives such as 2,4,6-trinitrotoluene (TNT) in the gas phase, even in the presence of other volatile impurities such as n-heptane and ethanol  

Heteropoly acid was found to be an effective and efficient catalyst for the ring opening reaction of epoxides with various aromatic amines to produce the corresponding β-amino alcohols in moderate to excellent yields in water. This method provides a new and efficient protocol in terms of mild reaction conditions, clean reaction profiles, small quantity of catalyst, and simple work-up procedure  

A simple, rapid, atom economy and highly efficient procedure has been developed for thiolysis of epoxides by aromatic and aliphatic thiols under solvent-free conditions. A high regioselectivity in favor of nucleophilic attack at the benzylic carbon atom of aromatic epoxides, such as styrene oxide, is observed. However, aliphatic unsymmetrical alkenyl oxides undergo selective nucleophilic attack at the sterically less hindered carbon atom. A variety of β-hydroxy sulfides were obtained in short reaction time and excellent yields with nearly complete regioselectivity  

Controlling topographic features at all length scales is of great importance for the interaction of cells with tissue regenerative materials. We utilized an indirect three-dimensional printing method to fabricate polymeric scaffolds with pre-defined and controlled external and internal architecture that had an interconnected structure with macro- (400-500 μm) and micro- (∼25 μm) porosity. Polycaprolactone (PCL) was used as model system to study the kinetics of tissue growth within porous scaffolds. The surface of the scaffolds was decorated with TiO2 and bioactive glass (BG) nanoparticles to the better match to nanoarchitecture of extracellular matrix (ECM). Micrometric BG particles were... 

Although, the optical flow sensors which are used in optical mouse have high resolution in measuring displacement, their error refrain us from a precise and reliable measurement. Besides, these sensors require calibration based on the surface. Their error has different sources and the most important is surface texture in micro level. In this research, we have worked to find surface conditions on which sensor measurement is more precise. For this aim, we used an 800 DPI low cost optical flow sensor. For making different surface textures and grains, we printed different textures with 600 and 1200DPI resolution on white paper with certain length. Then we used optical flow sensor for measuring... 

A study was conducted to select the best alternative for the development of construction panels as well as investment in its manufacturing in Iran. Three alternatives are considered, cement-bonded wood composite product, substituted products (such as concrete panel) sandwich panel and a mixture of them. We apply the analytic network process (ANP) to achieve this goal. A hierarchy is designed to prioritize benefits, opportunities, costs and risks (BOCR) by using the Analytic Hierarchy Process (AHP) ratings approach. To evaluate the "control criteria" of the system, a control hierarchy is also created and prioritized by applying the Analytic Network Process (ANP). A total of four major control... 

This paper investigates a new method of dissipating energy in which a rigid tube is driven into the deformable tube under axial compression. Since there is a specific clearance between the rigid and deformable tubes, the deformable tube is expanded during axial compression, and the impact energy is absorbed by plastic expansion of deformable tube and frictional energy between deformable and rigid tubes. Quasi-static axial compression tests with different values of friction coefficient between rigid and deformable tubes are performed. Theoretical formulation with consideration of strain hardening effect is presented to predict the mean crushing load. Theoretical and experimental studies show... 

Applying engineering approaches to non-engineering systems such as biological systems has brought a new research filed to the surface. The sole purpose of this research is mathematical modeling the cell cycle control system in the fissionyeast cell using Ordinary Differential Equations (ODE).This paper, in fact, introduces the capabilities of engineering knowledge and engineering of control, in particular, in this field. ©2009 IEEE  

Wound healing is a complex biological process dependent on multiple variables: tissue oxygenation, wound size, contamination, etc. Many of these factors depend on multiple factors themselves. Mechanisms for some interactions between these factors are still unknown, presenting a barrier for scientists intending to model wound healing using an object-based programming approach. In this paper we focus on the neural networks and regard them as function approximators, and attempt to simulate remodeling phase of dermal wound healing process using neural networks as an intelligence technique. © 2009 IEEE  

Though wound healing process is well-researched, this area is poorly known. One reason is that all interactions have not been discovered, the main reason, though, is that the involved processes interact in a very complicated manner with nonlinear feedback. Such complex feedback mechanisms can be easily addressed by mathematical modeling. This paper contains a review of the mathematical modeling of cell interaction with extracellular matrix components during the process of dermal wound healing with focusing on remodeling phase. The models are of partial differential equation type and solved by finite element method. © 2009 IEEE  

Fe-Ni nano-particles were synthesized by mechanical alloying and subsequent low-temperature hydrogen reduction of oxide mixtures. First, single-phase nickel ferrite was mechanically synthesized for 30 h with steel balls to powder weight ratio of 20 while the milling was operated at 300 rpm. The as-milled powder was then placed in contact with hydrogen at 600 °C for 1 h. Reduction reactions resulted in production of Fe-Ni nano-particles. Phase identification, morphological and microstructural studies, chemical analysis and magnetic property determination were carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM), transition electron microscopy (TEM), energy dispersive... 

The objective of this research is to design a method for selection of an appropriate location to establish plywood and veneer plants in Iran. Due to the climate of this region as well as the destruction of the forests and lack of proper plantation, the supporting forests to feed this industry are limited. Thus, it is vital to optimize the other strategically factors in order to make these plants capable of competing with the foreign plants which have access to less expensive input materials. In case of improper utilization of the resources, this industry can not compete with the imported products. The decision is made within the framework of benefits, opportunities, costs and risks (BOCR).... 

Perceptual decisions rely on accumulating sensory evidence over time. However, the accumulation process is complicated in real life when evidence resulted from separated cues over time. Previous studies demonstrate that participants are able to integrate information from two separated cues to improve their performance invariant to an interval between the cues. However, there is no neural model that can account for accuracy and confidence in decisions when there is a time interval in evidence. We used behavioral and EEG datasets from a visual choice task —Random dot motion— with separated evidence to investigate three candid distributed neural networks. We showed that decisions based on...