Sharif Digital Repository

The Curing of thick thermoset parts of composites Experience substantial temperature overshoot, especially at the center of those thick parts and large temperature gradient exists through the whole part due to large amount of released heat, thickness and low conductivity of the composite.this leads to non-uniformity of cure, residual stress and consequently composite cracks and possibly degradation of the polymer. In this thesis, first a thick cubic geometery of glass/epoxy composite is modeled with the help ofa commercial CFd packageand sensitivity to different effective parameters of this process is investigated with the help of this model.This model is then substituted by a trained... 

Cell lysis, as the first procedure of cell pretreatment, is a process that breaks cell membranes open thereby facilitating access to intracellular substances, such as DNA, proteins, and other components for further analysis to diagnose and treat diseases at early stages. Currently, there are several methods for cell lysis at macroscales. However, the time-consuming and expensive procedures as well as the large scal of the system are the main disadvantages of the systems. Recently, microfluidic systems have attracted considerable attention due to advantages associated with automation, integration and miniaturization of biomedical test protocols. Centrifugal microfluidics (Lab-on-a-Disc) is a... 

One of the novel methods of stabilization of nuclear waste is the use of vitrification technology. In order to stabilize high level wastes (HLLW) in glass, it is required that the elements are in their oxide form. Therefore, it is necessary to evaporate the waste and turn it into a solid form so that the elements can be converted into oxide form in the calcination furnace. Hence, one of the challenges of stabilization is the optimization of evaporation and calcination conditions. In this research, the parameters affecting evaporation were first investigated. Using laboratory measurements of application: temperature (110 to 180 °C), presence of nitric acid (0.5 to 4 mol/L), ratio of zirconium... 

This study used the emulsion liquid membrane method to investigate the extraction and separation of thorium from nitrate solution. According to the results obtained from the studies, Cyanex 272 was a suitable option for selectively extracting thorium. For simultaneous extraction and stripping of thorium from dilute aqueous solutions, an emulsion liquid membrane system consisting of Cyanex 272 as an extractant, Span 80 as a surfactant and sulfuric acid solution as a receiving phase (internal phase) was used. Emulsion liquid membrane method has high mass transfer flux due to high surface to volume ratio, which causes high extraction efficiency and fast transfer of thorium ions from its low... 

One of the most common spinal surgeries involves spinal fusion or vertebral fixation, which is used to treat various conditions such as intervertebral disc disease, scoliosis (lateral deviation of the spinal column), fractures, infections, or the presence of tumors in the spinal column. In this surgical procedure, the use of pedicle screws and titanium rods prevents motion and friction between two vertebrae. Screws may enter the vertebrae in the wrong position and angle, causing bone weakening, rupture of nerve roots or blood vessels, weakness or lack of sensation in some parts of the body, spinal cord injury, and in severe cases, paralysis of the patient. For this reason, fusion surgery is... 

Lithium is a soft, silvery-white alkali metal that is recognized as the lightest metal and the least dense solid element. The increasing demand for lithium, driven by the global shift towards electrification and sustainable energy solutions, has transformed this material into a crucial resource in the modern economy. Lithium has applications in various industries, including the nuclear industry. 6Li is used for the production of tritium, and 7Li, in the form of 7LiOH, is used to adjust the pH in light water reactors and as an anti-corrosion compound in fission reactors. In this study, the extraction of lithium from the aqueous phase using a Y-shaped microchannel was carried out, and the mass... 

In most chemical processes, at the first stage, the feed are being treated in physical steps such as preheating. Afterward it enters reaction system to undergo chemical treatment. In the final stage, product of reaction system is physically processed to prepare them to exit the boundary of the process. There are various ways to process materials chemically. This process can be continuous, batch and even semi-batch, via a single reactor or a network of the reactors. And also it can be performed under various range of operating condition. Moreover in some cases, intermediate cooling and heating is necessary. The question is that which configuration and operating condition is the best. The goal...