Loading...
Search for:
dorri-nokoorani--y
0.104 seconds
Total 1454 records
Development of a polyvinyl alcohol/sodium alginate hydrogel-based scaffold incorporating bFGF-encapsulated microspheres for accelerated wound healing
, Article Scientific Reports ; Volume 10, Issue 1 , 2020 ; Shamloo, A ; Dorri Nokoorani, Y ; Sharif University of Technology
Nature Research
2020
Abstract
In the present study, a hybrid microsphere/hydrogel system, consisting of polyvinyl alcohol (PVA)/sodium alginate (SA) hydrogel incorporating PCL microspheres is introduced as a skin scaffold to accelerate wound healing. The hydrogel substrate was developed using the freeze-thawing method, and the proportion of the involved polymers in its structure was optimized based on the in-vitro assessments. The bFGF-encapsulated PCL microspheres were also fabricated utilizing the double-emulsion solvent evaporation technique. The achieved freeze-dried hybrid system was then characterized by in-vitro and in-vivo experiments. The results obtained from the optimization of the hydrogel showed that...
Fluidic barriers in droplet-based centrifugal microfluidics: Generation of multiple emulsions and microspheres
, Article Sensors and Actuators, B: Chemical ; Volume 311 , May , 2020 ; Madou, M. J ; Dorri Nokoorani, Y ; Shamloo, A ; Martinez Chapa, S. O ; Sharif University of Technology
Elsevier B. V
2020
Abstract
Droplet generation is very important in biochemical processes such as cell encapsulation, digital PCR (Polymerase Chain Reaction), and drug delivery. In the present paper, a density-based method called “fluidic barrier” is introduced to produce multiple emulsions on a centrifugal microfluidic platform or Lab-on-a-CD (LOCD). We show that the density and the viscosity of the fluids involved are important parameters for predicting the characteristics of the droplets generated with this method. Moreover, we broadened this concept by using the fluidic barriers to separate reactive chemicals. As a proof of concept, alginate and CaCl2 solutions are separated by an oil barrier to control the...
Fabrication and characterization of scaffolds containing different amounts of allantoin for skin tissue engineering
, Article Scientific Reports ; Volume 11, Issue 1 , 2021 ; 20452322 (ISSN) ; Shamloo, A ; Bahadoran, M ; Moravvej, H ; Sharif University of Technology
Nature Research
2021
Abstract
Using the skin tissue engineering approach is a way to help the body to recover its lost skin in cases that the spontaneous healing process is either impossible or inadequate, such as severe wounds or burns. In the present study, chitosan/gelatin-based scaffolds containing 0.25, 0.5, 0.75, and 1% allantoin were created to improve the wounds’ healing process. EDC and NHS were used to cross-link the samples, which were further freeze-dried. Different in-vitro methods were utilized to characterize the specimens, including SEM imaging, PBS absorption and degradation tests, mechanical experiments, allantoin release profile assessment, antibacterial assay, and cell viability and adhesion tests....
Fabrication and Characterization of Chitosan/Gelatin Based Scaffolds Using Adipose Derived Stem Cells Applicable in Skin Tissue Engineering
, M.Sc. Thesis Sharif University of Technology ; Shamloo, Amir (Supervisor) ; Firouzbakhsh, Keikhosrow (Supervisor)
Abstract
Skin tissue engineering, is considered as a method to heal full-thickness wounds. The basis of this method is fabrication a substrate named scaffold in order to replace the lost skin tissue temporarily. The aim of the present study is the fabrication and characterization of skin scaffolds using two natural polymers, which are Chitosan and Gelatin. This study is divided into three phases: first is the investigation of the influence of two cross-linkers named Glutaraldehyde and a kind of carbodiimide on the properties of scaffolds, second is the characterization of scaffolds fabricated by three different ratios of chitosan/gelatin and third is the evaluation of the effect of Allantoin on...
Explicit finite element modeling of wear within the patellofemoral joint in total knee replacement
, Article 26th National and 4th International Iranian Conference on Biomedical Engineering, ICBME 2019, 27 November 2019 through 28 November 2019 ; 2019 , Pages 208-212 ; 9781728156637 (ISBN) ; Dorri Nokoorani, Y ; Barati, K ; Farahmand, F ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2019
Abstract
Total knee replacement (TKR) surgery is one of the most successful and cost-effective procedures for treating knee injuries performed in orthopedics. However, the knee replacement revision surgery will probably be required after some years. Wear at the contact area between femoral metal component and the polyethylene inserts in TKR is recognized as one of the foremost causes of prosthesis failure and necessity of revision surgery. In the present study, focusing on the patellofemoral joint (PFJ), the wear at the contact area between the patellar and femoral components has been simulated employing the explicit finite element modeling. In this regard, common types of patellar component surface...
TIRIAC: A trust-driven risk-aware access control framework for Grid environments
, Article Future Generation Computer Systems ; 2015 ; 0167739X (ISSN) ; Jalili, R
Elsevier
2015
Abstract
The infrastructure provided by a Grid enables researchers to collaboratively solve various research problems through sharing their resources and establishing virtual organizations (VOs). However, the distributed and dynamic nature of a Grid VO is a challenge for access control systems. All users in a VO have responsibilities which correspond to their rights. While they should be able to make use of all VO resources, irresponsibility and permission misuse (insider attack) impose costs and losses on the affected resources. Hence, the history of users' behavior and the possibility of misuse need to be considered in the resource providers' risk management process. In this paper, we propose the...
Uncertainty in trust: A risk-aware approach
, Article International Journal of Uncertainty, Fuzziness and Knowlege-Based Systems ; Volume 24, Issue 5 , 2016 , Pages 703-737 ; 02184885 (ISSN) ; Jalili, R ; Sharif University of Technology
World Scientific Publishing Co. Pte Ltd
2016
Abstract
Uncertainty and its imposed risk have significant impacts on decision-making. However, both are disregarded in many trust-based applications. In this paper, we propose a risk-aware approach to explicitly take uncertainty of trust and its effects into account. Our approach consists of a trust, a confidence, and a risk model. We do not prescribe a specific trust model, and any probabilistic trust model can be empowered by our approach. The confidence model calculates the uncertainty of the trust model in the form of a confidence interval, and is independent of the inner-workings of the trust model. This interval is used by the utility-based risk model which assesses the effects of uncertainty...
TIRIAC: A trust-driven risk-aware access control framework for Grid environments
, Article Future Generation Computer Systems ; Volume 55 , 2016 , Pages 238-254 ; 0167739X (ISSN) ; Jalili, R ; Sharif University of Technology
Elsevier
2016
Abstract
The infrastructure provided by a Grid enables researchers to collaboratively solve various research problems through sharing their resources and establishing virtual organizations (VOs). However, the distributed and dynamic nature of a Grid VO is a challenge for access control systems. All users in a VO have responsibilities which correspond to their rights. While they should be able to make use of all VO resources, irresponsibility and permission misuse (insider attack) impose costs and losses on the affected resources. Hence, the history of users' behavior and the possibility of misuse need to be considered in the resource providers' risk management process. In this paper, we propose the...
An efficient features-based license plate localization method
, Article 18th International Conference on Pattern Recognition, ICPR 2006, Hong Kong, 20 August 2006 through 24 August 2006 ; Volume 2 , 2006 , Pages 841-844 ; 10514651 (ISSN); 0769525210 (ISBN); 9780769525211 (ISBN) ; Kasaei, S ; Dorri, F ; Sharif University of Technology
2006
Abstract
This paper presents a feature-based license plate localization algorithm that copes with multi-object problem in different image capturing conditions. The proposed algorithm is robust against illumination, shadow, scale, rotation, and weather condition. It extracts license plate candidates using edge statistics and morphological operations and removes the incorrect candidates according to the determined features of license plates. We have formed a rather complete database of 269 images in different conditions. The proposed algorithm successfully detecteds the accurate location of the license plates in 96.5% cases, which outperforms the other available approaches in the literature. © 2006...
Uncertainty-Aware Computational Trust
, Ph.D. Dissertation Sharif University of Technology ; Jalili, Rasool (Supervisor)
Abstract
Trust is a common concept in interpersonal relationships. It is a replacement for strict control mechanisms, helping individuals to have a better estimation of the risks involved in an interaction or relationship. Computational notions of trust have a close relationship with security in computer systems.Different models of trust have been proposed to regulate interactions in: security, collaborative systems, and routing. We focused on two important problems and challenges in this dissertation: proper handling of uncertainty, and uncertainty-aware trust-based decision-making.We propose an integrated approach to modeling, processing, and treating uncertainty, as well as to uncertainty-aware...
Study on Effect of Chemical Parameters on Mechanical and Morphological Properties of Biodegradable wo Phase Propylene/Starch Blends
, M.Sc. Thesis Sharif University of Technology ; Bagheri, Reza (Supervisor)
Abstract
In recent years the rapid rise of polymer consumption especially in the form of packaging materials became a real menace for the environment. Polyolefin are some of the most dominant packaging materials and responsible by part of the problems in the disposal of one-trip packaging. One of the possible ways of solving this problem is the introduction of additives increasing their susceptibility to environmental degradation into non-biodegradable polymers. One such additive is starch- the natural, cheap, and easily biodegradable polymer. Starch was already used as a filler or as a blend with polyolefin. Addition of dry starch granules to polyolefin follows the general trend of filler effects on...
Grid Resource Discovery Using a Peer-to-Peer Approach
, M.Sc. Thesis Sharif University of Technology ; Sarbazi Azad, Hamid (Supervisor)
Abstract
Resource sharing is the most important feature of a Grid. Resource discovery enables users to find the most suitable resources to run Grid jobs on. Resource discovery systems are often centralized or hierarchical. These structures are usually prone to a single point of failure, and unbalanced distribution of processing and storage load, making them inefficient as the Grid grows. These challenges have led researchers to adapt distributed approaches, such as Peer-to-Peer file sharing solutions. The important differences between Grid resource discovery and P2P file discovery (e.g. different resource attributes, queries, change patterns etc.) make it difficult to port the existing solutions to...
Proof of humanity: a tax-aware society-centric consensus algorithm for blockchains
, Article Peer-to-Peer Networking and Applications ; Volume 14, Issue 6 , 2021 , Pages 3634-3646 ; 19366442 (ISSN) ; Fotuhi Firuzabad, M ; Dorri, A ; Dehghanian, P ; Sharif University of Technology
Springer
2021
Abstract
Blockchain technology brings about an opportunity to maintain decentralization in several applications, such as cryptocurrency. With the agents of a decentralized system operating independently, it calls for a consensus protocol that helps all nodes to agree on the state of the ledger. Most of the existing blockchains rely on Proof of Work (PoW) as the underlying consensus algorithm, resulting in a significant amount of electricity power consumption. Furthermore, it demands the miner to buy specific computation devices. Besides, a protocol to gather the society-related taxes such as public education funding and charities is lacking in existing consensus algorithms. In response, this paper...
The effects of homogenization time and cooling environment on microstructure and transformation temperatures of Ni-42.5wt%Ti-7.5wt%Cu alloy
, Article Defect and Diffusion Forum ; Volume 297-301 , 2010 , Pages 344-350 ; 10120386 (ISSN); 3908451809 (ISBN); 9783908451808 (ISBN) ; Shokuhfar, A ; Etaati, A ; Dorri M., A ; Saatian, A ; Sharif University of Technology
Trans Tech Publications Ltd
2010
Abstract
The present paper deals with different effects of homogenization time and cooling environment on Ni-42.5wt%Ti-7.5wt%Cu alloy. The alloy was prepared by vacuum arc melting. Afterwards, three homogenization times (half, one and two hour) and three cooling environments (water, air and furnace) at 1373 K were selected. Optical and Scanning Electron Microscopic methods, EDX, DSC and hardness tests have been used to evaluate the microstructure, transformation temperatures and hardness. Results indicate that specimens that were cooled in air are super-saturated. Also, the microstructure from furnace cooling has many disparities with the other cooling environments' microstructure and two types of...
Design and Fabrication of a Microfluidic Device for Hydrodynamic Label-Free Isolation of Circulating Tumor Cells From Blood
, M.Sc. Thesis Sharif University of Technology ; Vosoughi, Manouchehr (Supervisor) ; Alemzadeh, Iran (Supervisor)
Abstract
Circulating tumor cells (CTCs) are cancer cells which shed from the primary tumor, enter circulation and spread cancer all over the body. CTCs give valuable information about cancer and can help diagnosis and prognosis. Hence separating and isolating CTCs from blood is a necessity for cancer therapeutics. CTCs are separated from blood cells by their different physical or biochemical properties. Many groups have attempted different methods for separation of CTCs. Inertial microfluidics is one of the newest approaches in CTC separation technologies which separates CTCs based on their size. Current inertial microfluidic systems containing straight, spiral, serpentine and contraction expansion...
Uncertainty in probabilistic trust models
, Article Proceedings - International Conference on Advanced Information Networking and Applications, AINA ; 2012 , Pages 511-517 ; 1550445X (ISSN) ; 9780769546513 (ISBN) ; Jalili, R ; IEEE Comput. Soc. Tech. Comm. Distrib. Process ; Sharif University of Technology
2012
Abstract
Computational models of trust try to transfer the concept of trust from the real to the virtual world. While such models have been widely investigated in the past decade, the uncertainty involved in trust computation has been overlooked in the literature. In this paper, uncertainty of probabilistic trust models is quantified using confidence intervals and its factors are determined through simulation. The results confirm the importance and highlight the amount of uncertainty in the Beta and HMM (Hidden Markov Model) trust models. In addition, an uncertainty-driven method is proposed which reduces the risk involved in the trust-based utility maximization according to uncertainty
Multiclass fuzzy user equilibrium with endogenous membership functions and risk-taking behaviors
, Article Journal of Advanced Transportation ; 2016 ; 01976729 (ISSN) ; Lou, Y ; Hsu, Y. T ; Shabanpour, R ; Shafahi, Y ; Sharif University of Technology
John Wiley and Sons Ltd
2016
Abstract
Over the last decades, several approaches have been proposed in the literature to incorporate users' perceptions of travel costs, their bounded rationality, and risk-taking behaviors into network equilibrium modeling for traffic assignment problem. While theoretically advanced, these models often suffer from high complexity and computational cost and often involve parameters that are difficult to estimate. This study proposes an alternative approach where users' imprecise perceptions of travel times are endogenously constructed as fuzzy sets based on the probability distributions of random link travel times. Two decision rules are proposed accordingly to account for users' heterogeneous...
Ultrafine Co nanoislands grafted on tailored interpenetrating N-doped carbon nanoleaves: An efficient bifunctional electrocatalyst for rechargeable Zn-air batteries
, Article Chemical Engineering Journal ; Volume 431 , 2022 ; 13858947 (ISSN) ; Chen, L ; Yang, H ; Zhang, Y ; Peng, Y ; Luo, X ; Ahmad, A ; Ramzan, N ; Xu, Y ; Shi, Y ; Sharif University of Technology
Elsevier B.V
2022
Abstract
Zeolitic imidazole frameworks (ZIFs) provide an exciting platform to design and fabricate non-precious-metal carbon-based catalysts for oxygen reduction/evolution reaction (ORR/OER). Herein, we elaborately design a facile enzyme-assisted synthetic strategy that enables to tailor the ZIFs precursors into structural stable decussation shape, which derived Co nanoislands grafted on decussate N-doped carbon nanoleaves (D-Co@NC) can well retain the interpenetrating nanostructure. Benefiting from the combined advantages of compositions and interpenetrating nanostructures, D-Co@NC possesses 5.2 times higher exposed electrochemical active area than the conventional dodecahedral one, thus endowing...
Interaction of glazing parameters, climatic condition and interior shadings: performing energy and cost analysis in a residential building in Iran
, Article Energy Efficiency ; Volume 13, Issue 1 , 21 December , 2020 , Pages 159-176 ; Gholipour, Y ; Saboohi, Y ; Yan, W ; Sharif University of Technology
Springer
2020
Abstract
In this paper, the interaction between various window specifications and different climate conditions is investigated. For this purpose, simultaneous effects of several aspects including glazing system, glass type, filling gas, glass thickness, window frame fraction, and interior shading are considered under three different climatic conditions. To evaluate the energy performance of various considered alternatives, the energy simulation of a base case building is evaluated in a computer environment. Using the validated model, the energy analysis is quantitatively performed, and cost-benefit analyses from the viewpoints of both residents and government are carried out based on the domestic and...
THE POWER OF FEW: ACCELERATING AND ENHANCING DATA REWEIGHTING WITH CORESET SELECTION
, Article ICASSP, IEEE International Conference on Acoustics, Speech and Signal Processing - Proceedings ; 2024 , Pages 7100-7104 ; 15206149 (ISSN) ; Zhang, Y ; Zhang, Y ; Liu, S ; Sharif University of Technology
2024
Abstract
As machine learning tasks continue to evolve, the trend has been to gather larger datasets and train increasingly larger models. While this has led to advancements in accuracy, it has also escalated computational costs to unsustainable levels. Addressing this, our work aims to strike a delicate balance between computational efficiency and model accuracy, a persisting challenge in the field. We introduce a novel method that employs core subset selection for reweighting, effectively optimizing both computational time and model performance. By focusing on a strategically selected coreset, our approach offers a robust representation, as it efficiently minimizes the influence of outliers. The...