Sharif Digital Repository

Wireless body area networks (WBANs) are receiving significant interest as the next generation of wireless networks and emerging technology in the field of health monitoring. One of the most important factors for the acceptance of WBANs is the provision of appropriate security and access control mechanisms. Due to its nature in transferring the patients' sensitive data, WBAN has both classical and specific security requirements. In this paper, we survey such requirements and propose a new security scheme for satisfying them in WBANs. The proposed scheme deals with the overall network architecture, including intra- and inter-WBAN tiers, and proposes two mutual authentication and key exchange... 

In this study, a hybrid model is presented to predict the dislocation density and strength evolution of the rheoforged non-dendritic A356 alloy during multi-directional forging. Regarding the characteristics of non-dendritic A356 alloy, combination of Shear Lag and Nes models is used for the eutectic structure, and Nes model is used for the α-Al globular phase. The aspect ratio variations of Si particles in eutectic structure during 3 passes of multi-directional forging do not change the model predictions, significantly. Model predictions on shear stress are in good agreement with experimental results of shear punch test  

In this research the effects of cold deformation and heating to the semi-solid temperature on microstructure and mechanical properties of cast dendritic and non-dendritic structures of A356 alloy were investigated. To produce the non-dendritic samples, the semi-solid slurry was obtained by electromagnetic stirring and rheoforged and then the samples were heated to semi-solid temperature. In order to impose the deformation to the dendritic and non-dendritic samples, multidirectional forging process was used. Non-dendritic samples were deformed with applying one to three passes of the multidirectional forging and then were kept at the semi-solid range of temperature again. Microstructural and... 

Today modern computing systems leverage distributed models such as cloud, grid, etc. One of the obstacles of wide spreading these distributed computing models is security challenges which includes access control problem. These computing models because of providing features like on-demand self-service, ubiquitous network access, rapid elasticity and scalability, having dynamic infrastructure and offering measured service, need a powerful and continuous control over access and usage session. Usage control (UCON) model is emerged to cover some drawbacks of traditional access control models with features like attribute mutability and continuity of control. Several recent works have been done to... 

In this research, the electromagnetic stirring (EMS) process was used to produce semi-solid slurry with globular structure from cast A356 aluminum alloy. Then the slurry was forged in a die, which named rheoforging process. Utilizing multidirectional forging (MDF), the effect of severe plastic deformation on microstructure and mechanical properties of this alloy in dendritic and globular states was investigated. Shear punch, micro- and macro-hardness tests were used to study the mechanical properties of these samples. For metallographic examinations, the optical microscope equipped with the Clemex ® image analyzer software was used. Optimum globular structure of rheoforged specimens was... 

The leaching kinetics of stibnite in basic solution has been investigated. Spherical pellets of antimony sulphide were dissolved in 1 molar sodium hydroxide solutions at different temperatures. It was found that the shrinking core with ash layer model could satisfactorily explain the dissolution process. Using this model, it was found that initially the rate controlling step was a chemical reaction with activation energy of 10.2 kJ/mol. As the ash layer built up, diffusion through the ash layer became the rate controlling step. The activation energy for this step was found to be 33.4 kJ/mol. It was also observed that smaller particle size, larger solid to liquid ratio, and higher NaOH... 

Estate administration involves managing and distributing a deceased individual’s assets to beneficiaries, as well as managing the liabilities. This process comprises legal, financial, and administrative tasks that ensure assets are transferred based on the deceased's wishes and in accordance with the law. In Southeast Asia countries such as Indonesia, Malaysia and Brunei where Muslims represents the majority of population, the Islamic law plays an integral part in the inheritance management as the process to be in line with the Islamic teachings and principle. The role of the syariah authority namely the syariah courts is prevalent and therefore, abidance to the rule under the syariah legal... 

A novel intelligent semi-active control system for an eleven degrees of freedom passenger car's suspension system using magnetorheological (MR) damper with neuro-fuzzy (NF) control strategy to enhance desired suspension performance is proposed. In comparison with earlier studies, an improvement in problem modeling is made. The proposed method consists of two parts: a fuzzy control strategy to establish an efficient controller to improve ride comfort and road handling (RCH) and an inverse mapping model to estimate the force needed for a semi-active damper. The fuzzy logic rules are extracted based on Sugeno inference engine. The inverse mapping model is based on an artificial neural network... 

Using CNG as an additive for gasoline is a proper choice due to higher octane number of CNG enriched gasoline with respect to that of gasoline. As a result, it is possible to use gasoline with lower octane number in the engine. This would also mean the increase of compression ratio in SI engines resulting in higher performance and lower gasoline consumption. Over the years, the use of simulation codes to model the thermodynamic cycle of an internal combustion engine have developed tools for more efficient engine designs and fuel combustion. In this study, a thermodynamic cycle simulation of a conventional four-stroke spark-ignition engine has been developed. The model is used to study the... 

With the declining energy resources and increase of pollutant emissions, a great deal of efforts has been focused on the development of alternatives for fossil fuels. One of the promising alternative fuels to gasoline in the internal combustion engine is natural gas [1-5]. The application of natural gas in current internal combustion engines is realistic due to its many benefits. The higher thermal efficiency due to the higher octane value and lower exhaust emissions including CO2 as a result of the lower carbon to hydrogen ratio of the fuel are the two important feature of using CNG as an alternative fuel. It is well known that computer simulation codes are valuable economically as a cost... 

Gaining insight into possible vibratory responses of dynamical systems around their stable equilibria is an essential step, which must be taken before their design and application. The results of such a study can significantly help prevent instability in closed-loop stabilized systems by avoiding the excitation of the system in the neighborhood of its resonance. This paper investigates nonlinear oscillations of a rotary inverted pendulum (RIP) with a full-state feedback controller. Lagrange’s equations are employed to derive an accurate 2-DoF mathematical model, whose parameter values are extracted by both the measurement and 3D modeling of the real system components. Although the governing... 

A suction-controlled ring device has been developed to continuously measure the coefficient of lateral soil pressure in deformable unsaturated soil samples from the at-rest to the active condition under application of increasing vertical pressure and controlled matric suction. The device incorporates a thin aluminum specimen ring equipped with horizontal strain gages for recording the lateral soil strains. In addition, a sensor recording water volume changes is utilized to continuously monitor the degree of saturation of the soil sample during tests. The matric suction within the soil texture is controlled using the axis translation technique. In order to verify the performance of the ring... 

We introduce a new smooth, non-toxic, biocompatible method for cross-linking of gum tragacanth (GT), a polysaccharide of natural origin, in order to serve as a new supporting matrix for immobilization systems. The modified gum is used as a matrix for the catalysis of the conversion of benzyl penicillin to 6-aminopenicillanic acid (6-APA) by means of Escherichia coli ATCC11105 with penicillin G acylase (PGA) activity. The results show that GT beads can not only serve as a proper matrix for immobilization, but show enhanced hydrolysis rate and stability compared to other immobilization systems used for this reaction. This signifies the potential of GT as a biocompatible matrix for... 

The Class-E power amplifier has been widely studied and formulated in the literature. Although the majority of reported inductive coupling wireless power transfer (WPT) systems use a class-E power amplifier for driving the primary coil, still there is a lack of a comprehensive study on class-E circuit dedicated to WPT, providing a set of closed form design equations for proper class-E operation. This paper presents the required design equations needed to design a 'true' class-E circuit for WPT applications. Equations for the series-tuned secondary coil WPT system are presented, as well as two different design procedures for the parallel-tuned secondary coil. The derived equations have been... 

Pole Side Impact Tes is one out of three crash tests described by Euro NCAP standard for star rating of a vehicle and is required for assessing the Adult Occupant Protection. In this paper the goal is to determine the crashworthiness of side doors and B pillar in a Pole Side Impact Test based on Euro New Car Assessment Program (Euro-NCAP) using computer and simulation method. In this matter, a vehicle model has been prepared and meshed using Hypermesh and CATIA. The velocity of 29 km/h has been assigned to the vehicle which was on top of a cart while the pole has been assigned as a rigid static object based on Euro NCAP requirements specifically. Results show that different amounts of energy... 

To assess a car under the Euro New Car Assessment Program (Euro-NCAP), Adult Occupant Protection is one out of three parameters which need to be calculated with a weight factor of 50% while the other parameters, Child Occupant Protection and Pedestrian Occupant Protection, have a weight factor of 20%. The Pole Side Impact Test, beside two other tests, Side and Front Impact, is also required to calculate the Adult Occupant Protection. It shows how important the Pole Side Impact Test is and what an effective role it has in the car rating assessment. In this paper, the objective is to evaluate the effect of thickness on the energy absorbed by the side doors and the B pillar and its... 

In Euro NCAP standard, adult protection is one of the most important rating scores with 50% weight factor while child protection and pedestrian protection are accounted into consideration with 20% weight factor. For adult protection testing, three tests are required to perform: (1) side impact, (2) pole impact, (3) front impact. In the side impact test, dummy's head, chest, shoulder, thorax, ribs, abdomen, pelvic and femur must be studied to evaluate the rating score. Crashworthiness of a car during side impact can describe the score rated for that car. In this paper the goal is to determine the crashworthiness of side doors and B-pillar in side impact crash est by simulation using LS DYNA...