Sharif Digital Repository

Methods for the regioselective C-H borylation and subsequent cross-coupling of the 2,1-borazaronaphthalene core are reported. Azaborines are dependent on B-N/C=C isosterism when employed in strategies for developing diverse heterocyclic scaffolds. Although 2,1-borazaronaphthalene is closely related to naphthalene in terms of structure, the argument is made that the former has electronic similarities to indole. Based on that premise, iridium-mediated C-H activation has enabled facile installation of a versatile, nucleophilic coupling handle at a previously inaccessible site of 2,1-borazaronaphthalenes. A variety of substituted 2,1-borazaronaphthalene cores can be successfully borylated and... 

Shape is a key factor in influencing mechanical responses of bones. Considered to be smart viscoelastic and inhomogeneous materials, bones are stimulated to change shape (model and remodel) when they experience changes in the compressive strain distribution. Using reverse engineering techniques via computer-aided design (CAD) is crucial to create a virtual environment to investigate the significance of shape in biomechanical engineering. Nonetheless, data are lacking to quantify the accuracy of generated models and to address errors in finite element analysis (FEA). In the present study, reverse engineering through extrapolating cross-sectional slices was used to reconstruct the diaphysis of... 

An approach to access azaborininones (carbonyl-containing, boron-based heterocyclic scaffolds) using simple reagents and conditions from both organotrifluoroborates and boronic acids is described. An inexpensive, common reagent, SiO2, was found to serve as both a fluorophile and desiccant to facilitate the annulation process across three different azaborininone platforms. Computational analysis of some of the cores synthesized in this study was undertaken to compare the azaborininones with the analogous carbon-based heterocyclic systems. Computationally derived pKa values, NICS aromaticity calculations, and electrostatic potential surfaces revealed a unique isoelectronic/isostructural... 

In this work effect of composition changes of injection gas, CH4 + CO2, on the performance of immiscible WAG injection in light oil, 41 oAPI, which has been rarely attended in the available literature is investigated. Presence of CO2 helps to reduce the MMP of CH4 significantly. Core flood experiments are conducted at reservoir conditions and fixed flow rate of 0.5cc/min on a sandstone sample with the brine concentration of 5000 ppm, and the influence of injection gas composition as well as WAG ratio on oil recovery is investigated. Different mole percents of methane in mixture, 0%, to 100% are examined, and the tests continued to ten alternate cycles with a slug size of 0.1 pore volumes and... 

The onset of fretting fatigue is characterized by material microstructural changes in which the extent of the damage is comparable to grain size, and hence, the microstructure characteristics could have a significant effect on fatigue crack initiation. In this paper, a three-dimensional finite element crystal plasticity framework is presented for simulation of the fretting fatigue. Controlled Poisson Voronoi tessellation (CPVT) method is employed to generate the polycrystalline region. In the CPVT method, regularity parameter controls the shape of grains. In this study, the impact of grain size and regularity parameter on crack initiation life and initiation site has been investigated.... 

The onset of fretting fatigue is characterized by material microstructural changes in which the extent of the damage is comparable to grain size, and hence, the microstructure characteristics could have a significant effect on fatigue crack initiation. In this paper, a three-dimensional finite element crystal plasticity framework is presented for simulation of the fretting fatigue. Controlled Poisson Voronoi tessellation (CPVT) method is employed to generate the polycrystalline region. In the CPVT method, regularity parameter controls the shape of grains. In this study, the impact of grain size and regularity parameter on crack initiation life and initiation site has been investigated.... 

This paper presents the influence of the severe shot peening process on the fatigue life of the laser-cladded Inconel 718 specimens which can be employed during refurbishment of components enduring high mechanical cyclic loads such as gas turbine components. In order to quantitatively evaluate the destructive effect of laser cladding on the fatigue endurance, fatigue tests are first performed on the as-received and laser-cladded specimens. Then, microstructural analysis by scanning electron microscope (SEM) is carried out to identify the root causes of the drawback of laser cladding. Moreover, by employing a comprehensive laser-cladding FE analysis considering cyclic plastic material... 

The modified couple stress theory is employed in this paper in order to formulate the size-dependent strain energy release rate of Euler-Bernoulli and Timoshenko notched beams. As a case study, the normalized energy release rate of the aforementioned beams has been developed for three-point bending as a function of the ratio of material length scale parameter to the beam depth. The results of the current model are compared to the experimental data. The good agreement between the present results and the experimental values indicates that the current model can be successfully applied to evaluate size dependent energy release rate of structures  

A new, robust homogenization scheme for determination of the effective properties of a periodic piezoelectric composite with general multi-coated inhomogeneities is developed. In this scheme the coating does not have to be thin, the shape and orientation of the inclusion and coatings do not have to be identical, their centers do not have to coincide, their properties do not have to remain uniform, and the microstructure can be with the 2D elliptic or the 3D ellipsoidal inclusions. The development starts from the local electromechanical equivalent inclusion principle through the introduction of the position-dependent equivalent eigenstrain and electric field. Then with a Fourier series... 

Transient elongational rheology of PP is investigated experimentally. A specifically designed fixture consisting of two drums mounted on a TA Instruments ARES rotational rheometer was used to measure the transient uniaxial extensional viscosity of two commercial grades polypropylene in the molten state. The Hencky strain was varied from 0.003 to 2 s-1 and the temperature was fixed at 180 °C. The measurements show that the steady state elongational viscosity was reached at the measured Hencky strains for polypropylene. Eslami and Grmela have recently introduced a reptation diffusion term arising from the intermolecular chain forces into the rigid FENE-P dumbbells model. The same approach has... 

In this research, the recovery of uranium from the phosphate ore of the Sheikh Habil-Iran mine using flotation/calcination-leaching processes has been investigated. A 75–150 μm phosphate ore particle size, sodium oleate as a collector with a concentration of 2,000 g/ton of rock, pH = 10, and 5 min flotation time were obtained as the optimum parameters of flotation using the reverse method, leading to phosphate ore with a grade of 180 ppm UO2, 36.1% P₂O₅, 7.22% SiO2, and CaO/P₂O₅ = 1.23. The optimum calcination parameters were selected as 100 μm phosphate ore particles size at D80, 900°C temperature, and 2 h heating time, which resulted in phosphate ore with a grade of 173 ppm UO2 and 31.9%... 

An offshore structure is exposed to environmental loading and cyclic stress variations throughout its life. This would result in the possibility of fatigue cracking in its members. Cracks in these structures usually initiate around welded areas, then grow progressively from the heat-affected zone to base metal through the thickness of the tubular members. Therefore, fatigue life improvement of offshore structures is of great importance. In this paper, structural analysis of an offshore platform is carried out and the critical joint is specified. The welding process is simulated and the residual stresses due to the welding are determined. Experimental residual stress measurement is carried... 

Cobalt hydroxide modified glassy carbon electrodes (CHM/GC) prepared by the anodic deposition in presence of tartrate ions have been used for the electro-catalytic oxidation of methanol in alkaline solutions where the methods of cyclic voltammetery (CV), chronoamperometry (CA) and impedance spectroscopy (IS) have been employed. In CV studies, in the presence of methanol the peak current of the oxidation of cobalt hydroxide increase is followed by a decrease in the corresponding cathodic current. This suggests that the oxidation of methanol is being catalysed through the mediated electron transfer across the cobalt hydroxide layer comprising of cobalt ions of various valence states. A... 

In this study, a jet propulsion JP combustor is studied numerically to investigate the combustor wall temperature influences on the soot characteristics emitted at its exhaust. There are a number of ways to control the combustor wall temperatures benefiting from different wall cooling technologies. Irrespective of using different high technology cooling systems, it is important to recognize how the wall temperature can affect the soot emission from one specific JP engine. Before examining the main combustor, it is important to assess the accuracy of the computational fluids dynamics (CFD) tool via solving a benchmark problem. In this regard, the predicted flame structure for the benchmark... 

Scratch Pad Memory (SPM) is an important part of most modern embedded processors. The use of embedded processors in safety-critical applications implies including fault tolerance in the design of SPM. This paper proposes a method, called FTSPM, which integrates a multi-priority mapping algorithm with a hybrid SPM structure. The proposed structure divides SPM into three parts: 1) a part is equipped with Non-Volatile Memory (NVM) which is immune against soft errors, 2) a part is equipped with Error-Correcting Code, and 3) a part is equipped with parity. The proposed mapping algorithm is responsible to distribute the program blocks among the above three parts with regards to their vulnerability... 

The effects of the residual stress field resulting from shot peening and the indentation technique were investigated in relation to fatigue crack closure and crack growth behaviour. Compact Specimens of 20NiCrMo2 were used in this investigation. The regions of residual stress field were located behind the fatigue crack tip. Crack closure behaviour was measured with back face strain and crack mouth opening displacement gauges. Crack length was monitored by the compliance and microscopic methods. Residual stress was measured by the incremental hole-drilling method. Subsequently the closure level, propagation rate and resulting crack growth retardation were studied. Crack closure and attendant... 

Aluminium cylinders with a constant ratio of outer to inner radii, k=2.2, with different diametral interferences and various shrinkage radii were subjected to bursting and autofrettage pressures. Numerical simulations of the compound cylinders were also performed using the finite element code, NISA. The results can predict the optimum shrinkage radius to a reasonable accuracy with the use of finite element analysis. This radius corresponds to the situation when the maximum von-Mises stress at the internal radii of both the inner and outer cylinders become equal. It was shown that the maximum von-Mises stress across the wall of the cylinder is at the minimum at this shrinkage radius. The... 

This letter introduces a consensus-based generalized multi-population aggregative game coordination approach with application to electric vehicles charging under transmission line constraints. The algorithm enables agents to seek an equilibrium solution while considering the limited infrastructure capacities that impose coupling constraints among the users. The Nash-seeking algorithm consists of two interrelated iterations. In the upper layer, population coordinators collaborate for a distributed estimation of the coupling aggregate term in the agents' cost function and the associated Lagrange multiplier of the coupling constraint, transmitting the latest updated values to their population's... 

Coverage is one of the most important parameters which is always used in practice to characterize a shot peening process. At the same time however, it is the most missing parameter in the finite element simulations of this process. This study aims to relate shot peening simulation to the actual coverage that is developed during the process. Accordingly, two important models from literature are re-simulated and their capability to predict an actual coverage is assessed. Results of this study illustrate that full coverage situation is not captured by these models. Thereafter, a random finite element simulation along with a step by step examination of the treated surface is adopted in order to...