Sharif Digital Repository

Commonly, capillary pressure-saturation-relative permeability (Pc-S-Kr) relationships are obtained by means of laboratory experiments carried out on soil samples that are up to 10-12 cm long. In obtaining these relationships, it is implicitly assumed that the soil sample is homogeneous. However, it is well known that even at such scales, some micro-heterogeneities may exist. These heterogeneous regions will have distinct multiphase flow properties and will affect saturation and distribution of wetting and non-wetting phases within the soil sample. This, in turn, may affect the measured two-phase flow relationships. In the present work, numerical simulations have been carried out to... 

Precipitation, aggregation, and breakup of asphaltene particles are studied under natural depletion and nitrogen injection processes by means of high pressure filtration and a photographic procedure coupled with image analysis. Filtration results show that nitrogen destabilizes asphaltenes extremely, and the problem is more severe for heavier crude samples. Bimodal histograms of particle size distribution show two agglomeration mechanisms: cluster aggregation dominant around bubble point pressure and diffusion limited far away. The fractal structure of aggregates is also altered by gas injection; it is observed that the flocculent masses grow in size and become more compact and organized... 

Asphaltene deposition in a reservoir severely reduces the effective permeability and results in a reduction in oil production. The main term in asphaltene deposition modeling in the porous media is pore surface deposition. Previous models do not describe the effects of different parameters (i.e., concentration, velocity, and temperature) on the pore surface deposition term. We report the results of a series of experiments carried out to study the effects of the above parameters on the surface deposition term using an accurate thermal method. Based on these data, a new expression for the surface deposition term has been developed and implemented in asphaltene deposition modeling. The... 

Asphaltene precipitation and deposition is one of the main problems in some of the oil fields. The deposited asphaltene results in partial or total blockage of the wellstring and reducing or completely seizing oil production. Asphaltene deposition problems have been experienced in the field for a long time. Although, the asphaltene precipitation has been studied thoroughly and different parameters that effects this process has been investigated but little work has been carried out in the asphaltene deposition across the production system of flowing oil well. This paper introduces a new comprehensive model for description of asphaltene deposition behavior in wellstring. The mechanisms of... 

Arterial diseases, namely atherosclerosis, are believed to be a product of abnormal changes in both hemodynamic and non-hemodynamic factors. In order to explornmk,e the role of different factors in initiation and progression of this disease, a CFD technique was applied to study Interaction between the structure of the artery and blood flow for different suggested models that were used to describe mechanics of vessel wall. This study presents a three-dimensional, steady state simulation of blood flow through the single and double layered carotid artery bifurcation using fluid structure interaction (FSI) method. The wall shear stress and mechanical stress/strain are computed and analyzed under... 

Purpose: The purpose of this paper is to investigate natural convection in a porous wavy-walled enclosure that is including a cylinder cavity in the middle of it and filled with a hybrid nanofluid contains 1-Butanol as the base fluid and MoS2–Fe3O4 hybrid nanoparticles. Design/methodology/approach: The domain of interest is bounded by constant temperature horizontal corrugated surfaces and isothermal vertical flat surfaces. The numerical outputs are explained in the type of isotherms, streamline and average Nusselt number with variations of the Rayleigh number, Hartmann number, nanoparticle shape factor and porosity of the porous medium. For solving the governing equations, the finite... 

Ethylene oxide production units are among the most dangerous plants in the petrochemical industry. A detailed consequence analysis for different accidental scenarios for a storage tanks in a petrochemical complex in Iran is put forward. Credible scenarios were selected and all the effective factors that may influence the mechanism of release and dispersion of toxic materials were surveyed. Simulator software and numerical models were used to simulate the distribution of toxic material around the leak source. The results can be used in risk management and in providing an emergency response plan to counter unwanted situations in the plant. This is an abstract of a paper presented at the 7th... 

Different families of the Discrete Vapour Cavity Model (DVCM) are developed, including the frictionless, steady and quasi-steady friction models. A relaxation-dissipation approach is proposed to improve the timing of pressure pulses predicted by the classic DVCM. In this approach, a friction correction factor is introduced into the steady/quasi-steady friction term to reduce the local value of the dissipation term in regions facing with cavitation. The proposed approach is completely consistent with the classical water-hammer framework. The importance of the steady/quasi-steady friction term is investigated by comparing numerical results of different DVCMs with the experimental data for... 

The streamline boundary layer Casson liquid flow via wedge inspired by magnetic field effects is considered in this study. The governing laws of Casson fluid are modified by adding the effects of radiative heat flux, viscous dissipation and the surface permeability. Afterward, the model is transformed into simplified form using similarity variables and then analyzed via numerical scheme. The significant influence of the physical parameters appeared due to acting magnetic field, radiative heat flux, dissipation function and Prandtl number is specially treated for the flow behavior and thermal transfer mechanism plotted and discussed in detail. Further, tabulated results are also provided to... 

In this paper we present and investigate a digital design and implementational details of a wireless optical CDMA (OCDMA) system based on generalized optical orthogonal codes (OOCs). A detailed digital implementation analysis and transmitter/receiver architectures in the context of the above design are fully studied. We analyze various subsystems for a wireless OCDMA system including detector and receiver structure, acquisition, and tracking blocks as well as evaluating their performance in a typical wireless OCDMA communication system. By analyzing two main parts of the system, namely, chip-level detector and OCDMA receiver blocks we evaluate the performance of the overall system.... 

We have studied the simplest optomechanical system close to and in the bistable regime. We find that Optomechanical entanglement is particularly strong in this regime for large enough detuning. The robustness of entanglement against temperature is also studied  

In recent years, IWR (Isolated Word Recognition) was one of the main concerns of speech processing. The challenging problems in this field appear when the database become so large or when we have a lot of word with similarly pronounce in the database. This paper introduces a general solution for a traditional problem in isolated similarly pronounced word recognition, especially in large databases. One the important problem of traditional IWR is referred to their segmentation algorithm, their methods were lacking in efficiency due to the following reasons: First, using equal segmentation is not at all intelligent at all and as a result, cannot produce accurate results; besides, utilizing... 

A closed-form analytical computation of groundwater travel time (GWTT) for two-layer oceanic small island aquifers is developed assuming steady-state and sharp-interface conditions. The two-layer geology impacts on the GWTT are investigated using the developed analytical solution to achieve a greater transparency of such conceptualizations. The results demonstrate that the inclusion of geologic layering leads to large changes in the GWTT. Sensitivity analyses, using specified dimensionless parameters, are employed to assess the influences of hydraulic conductivity, recharge rate, upper layer thickness, and seawater/freshwater density difference parameters, which influence the GWTT. These... 

We study the overlap between the medical malpractice (med mal) and medical disciplinary systems using the records of almost 90,000 Illinois physicians who held an active license at any point from 1990–2016. We quantify the specialty-specific risk of having a paid med mal claim or a disciplinary action; how many physicians have both; and the extent to which physicians with two or more paid claims or two or more disciplinary actions account for a disproportionate share of the activity of both systems. We also examine which factors are associated with paid claims and disciplinary actions, and whether physicians with multiple paid claims or disciplinary actions are concentrated at particular... 

The response of a suspended cables subjected to narrow-band random excitations with two types of peaked P.S.D. is formulated and analyzed. Banach fixed-point theorem is used for eigenfunction analysis of the differential-integral equations of motion for the first time in this paper. Fredholm approach also is used in the free vibration analysis of the suspended cable and then using Galerkin mode approximation method, power spectral density, and root mean square of the response are computed for two practical types of excitation. All of the calculated results converted to dimensionless quantities make their usage easier in vibration analysis of some practical cases such as vibration of moving... 

The fresh groundwater lenses (FGLs) of small islands can be highly vulnerable to climate change impacts, including sea-level rise (SLR). Many real cases of atoll or sandy islands involve two-layer hydrogeological conceptualizations. In this paper, the influential factors that affect FGLs in two-layer small islands subject to SLR are investigated. An analytical solution describing FGLs in circular islands, composed of two geological layers, is developed for the simplified case of steady-state and sharp-interface conditions. An application of the developed model is demonstrated to estimate the FGL thickness of some real-world islands by comparison with existing FGL thickness data. Furthermore,... 

Irrigation is not well represented in land surface, hydrological, and climate models. One way to account for irrigation is by assimilating satellite soil moisture data that contains irrigation signal with land surface models. In this study, the irrigation detection ability of SMAP enhanced 9 km and SMAP-Sentinel 1 (SMAP-S1), 3 km and 1 km soil moisture products are evaluated using the first moment (mean) and the second moment (variability) of soil moisture data. The SMAP enhanced 9 km soil moisture product lacks irrigation signals in an irrigated plain south of Urmia Lake, whereas SMAP-S1 products record irrigation signal in soil moisture variability. Despite observing higher variability... 

The number of homeless people at airports has increased in recent years. As airports are safe, transit-accessible, convenient, and climate-controlled facilities with food and amenities, these places are attractive to homeless people who need a safe and secure place to stay. The main struggle of airports in this regard is maintaining a balance between customers, who are mostly the traveling public, and dealing with homeless people delicately. Moreover, because of their poverty and insufficient or no access to healthcare, these people suffer from physical and mental issues. With the COVID-19 pandemic, this problem became more critical. Many news media outlets started to report on homelessness... 

Hybrid deep neural network hidden Markov models (DNN-HMM) have achieved impressive results on large vocabulary continuous speech recognition (LVCSR) tasks. However, the recent approaches using DNN-HMM models are not explored much for text recognition. Inspired by the current work in automatic speech recognition (ASR) and machine translation, we present an open vocabulary sub-word text recognition system. The sub-word lexicon and sub-word language model (LM) helps in overcoming the challenge of recognizing out of vocabulary (OOV) words, and a time delay neural network (TDNN) and convolution neural network (CNN) based DNN-HMM optical model (OM) efficiently models the sequence dependency in the... 

The aim of this paper is to develop the technical knowledge, especially the optimum geometries, for the design and manufacturing of a supersonic gas-gas ejector for a wasteheat driven vehicle cooling system. Although several studies have been performed to investigate the effects of geometrical configurations of gas-gas ejectors, a progressive design methodology of an ejector compressor for application to a vehicle cooling system has not yet been described. First, an analytical model for calculation of the ejector optimum geometry for a wide range of operating conditions is developed, using R134a as the working fluid with a rated cooling capacity of 2.5 kW. The maximum values of entrainment...