Sharif Digital Repository

Partial discharge (PD) is a common phenomenon which occurs in insulation of high voltage equipments, such as; transformers and has a damaging effect on the insulation. If data mining techniques be used to find specifications and features of different types of partial discharges in power transformers, one can monitor the insulation condition of such equipment online and continuously. Those results can be employed to develop preventive measures more exactly and consequently the maintenance would require less time and cost for electric utility and improve the life time expectancy of the transformers. In this paper experiments are set up to create models for some types of PD that occurs in Power... 

Reviewing the various Partial Discharges (PD data mining researches which have been reported so far, this study compares the performance of different feature spaces and different classifiers employed for PD classification in insulation condition monitoring of power transformers. In this process, first a knowledge basis is developed through construction of 4 different types of PD models in the high voltage laboratory. Background noise is considered as one class in this knowledge basis. The high frequency time domain current signals of high voltage equipment are captured over one power frequency cycle. The single PD activities within this captured signal are extracted by application of a... 

Suggestion and application of a set of new features for on-line Partial Discharge (PD) monitoring, where there is no information about the type of PD is a challenging task for condition assessment of power equipments, such as a power transformer. This is looked for in this paper. So far, in past various techniques have been employed to develop a comprehensive PD monitoring system, however limited success has been achieved. One of the challenging issues in this field is the discovering of proper features capable of differentiating the involvement of possible types of PD sources. In order to examine the efficiency of the method established in this paper, which is based on application of a set... 

Partial discharge (PD) measurement is one of the best methods for condition monitoring of transformers. In this paper, we use 5 different types of defects as follows: scratch on winding insulation, bubble in oil, moisture in insulation paper, a very small free metal particle in the transformer tank, and a fixed sharp metal point on the transformer tank, for our PD-related studies. Each type of defect is implemented into 1 of the 5 identical transformer models, which had been developed in the authors' recent work. The continuous wavelet transform is applied to each related measured time-domain PD signals. This process results in an image, for each PD pulse in the time-frequency domain. Using... 

Despite the great use of concrete, tensile strength and low flexibility and brittleness are its weaknesses. Many solutions have been provided to eliminate the mentioned defects. In order to increase the flexibility of concrete in previous studies, crushed rubber tire particles have been added to concrete. Recycling car tires helps the environment and makes concrete much more flexible than regular concrete. In this research, silicone rubber has been replaced by 0%, 2%, 4%, 8%, 12.5%, 25%, and 50% of mineral aggregates. This rubber was initially in liquid form, which, after mixing with ordinary concrete, dispersed into the concrete texture and formed a uniform mixture, and this liquid rubber... 

Damage to structures with the concept of inelastic behavior and consequently hysteresis energy is very close. Therefore, it can be said that hysteresis energy at these levels can be a significant criterion for designing or controlling the structure. In this research, the first three steel frames of 4, 8, and 12 floors with the medium bending frame system have been designed with the statically equivalent method according to valid international regulations; then, all frames have been subjected to nonlinear dynamic analysis by seven accelerometers. The purpose of this study is to investigate the distribution of damage, energy, relative displacement, roof displacement, and base shear in the... 

The reaction of thiooxindoles with various 2- and 3-substituted pyridinium salts afforded a variety of functionalized thiazocinoindoles. The products have been prepared in good to excellent yields by regioselective dinucleophilic C/S-cyclocondensation of thiooxindoles with pyridinium salts  

The combined action of ultraviolet irradiation and microwave heating onto acetonitrile solution of [Re((Formula presented.))(CO)3(NCMe)]OTf ((Formula presented.) =phenantroline and neocuproine) afforded cis,trans-Re((Formula presented.))(CO)2(NCMe)2]+ acetonitrile derivatives. Substitution of relatively labile NCMe with a series of aromatic N-donor ligands (pyridine, pyrazine, 4,4’-bipyridine, N-methyl-4,4’-bipyridine) gave a novel family of the diimine cis,trans-[Re((Formula presented.))(CO)2(L)2]+ complexes. Photophysical studies of the obtained compounds in solution revealed unusually high absorption across the visible region and NIR phosphorescence with emission band maxima ranging from... 

In the present work we obtained a series of NIR luminescent platinum(II) complexes with a pincer N^N^C ligand based on the conjugated {benzoimidazo[1,2-a]pyrazine} system with the [Pt(N^N^C)L]n+ structural motif (L = phosphine, alkynyl or pyridine-type ligands). We have also synthesized two complexes with bidentate phosphines that demonstrate different types of coordination: 1) as chelating ligand (in case of 1,2-bis(diphenylphosphino)benzene), that led to de-coordination of pyridine ring of N^N^C ligand and formation of a [Pt(N^C)dppb]+ complex; 2) as a bridging ligand (in case of bis(diphenylphosphino)methane) between two {Pt(N^N^C)} fragments in a dimeric complex of type... 

Fine particulate matter characterized as PM2.5 is the most important criteria air pollutant in the city of Tehran. Tehran is one of the most polluted cities of the Middle East based on annual mean PM2.5 concentrations. Tehran emission inventory shows the large contribution of mobile sources to the total particles. PM2.5 source apportionment studies show large fraction of black carbon (BC) in the total mass of PM2.5, especially during the cold seasons. BC is the product of incomplete combustion that is mainly derived from diesel engines and rich-burned gasoline carburetor engines on scooters and light-duty vehicles. The present study shows the results of a large experimental campaign in which... 

We consider a Dynkin game where the seller possesses additional information compared to the buyer. The additional information is described by a random variable taking finitely many values. We show that the game possesses a value and we provide a necessary and sufficient condition for the existence of a Nash equilibrium. Results are illustrated with an explicit example. © 2018, Iranian Mathematical Society  

This review paper delves into the remarkable realm of MXene/carbon hybrid nanostructures within the context of electrochemical energy storage (EES) devices, exploring both the aspirations and realities of their application. The physicochemical attributes of MXenes are clarified, emphasizing the distinctive properties that render them promising candidates in energy storage systems. The synthesis methodologies of MXenes, including heteroatom-doped MXene-based materials and MXene-carbon composites, are expounded. This includes a comprehensive overview of the diverse strategies employed to engineer these hybrid structures. Focusing on energy storage applications, the intriguing domain of... 

Perovskite solar cells have been constructed under the standard procedure by employing soluble tetratriphenylamine-substituted Zn phthalocyanine as hole transporting material. Solution processed device construction was carried out under ambient conditions of 50–60% ambient humidity. Triphenylamine substitution played the double role of imparting solubility to the core metal phthalocyanine as well as to introduce electron-rich ligands, which could enhance the role of Zn phthalocyanine as hole transporter. Indeed, the obtained material was functional. The present data highlight tetratriphenylamine-substituted Zn phthalocyanine as hole transporting material but also highlight the importance of... 

In this work, a new catalyst based on palladium nanoparticle supported SBA-15 has been introduced. The designed catalyst was characterized by Scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FT-IR), Brunauer–Emmett–Teller (BET) surface area analysis, thermo gravimetric analysis (TGA), Energy-dispersive X-ray spectroscopy (EDS) and atomic absorption spectroscopy (AAS) analyses. For the first time, phenyltetrazole has been used as a ligand to the functionalization of SBA-15 to design robust heterogeneous catalyst with high-loading metal for reduction and oxidation in short time using a low amount of the catalyst. © 2018... 

In the field of radiotherapy, accurate imaging and image registration are of utmost importance for precise treatment planning. Magnetic Resonance Imaging (MRI) offers detailed imaging without being invasive and excels in soft-tissue contrast, making it a preferred modality for radiotherapy planning. However, the high cost of MRI, longer acquisition time, and certain health considerations for patients pose challenges. Conversely, Computed Tomography (CT) scans offer a quicker and less expensive imaging solution. To bridge these modalities and address multimodal alignment challenges, we introduce an approach for enhanced monomodal registration using synthetic MRI images. Utilizing unpaired... 

Indole-2(3H)thiones were cyclized under the action of 2-fluorobenzoyl chlorides to give thiochromeno[2,3-b]indol-11(6H)-ones or under the action of 2-chloronicotinoyl chlorides to give pyrido[3′,2′:5,6]thiopyrano[2, 3-b]indol-5(10H)-ones. The reaction of cyclization proceeds regioselectively in DMF and does not require transition metals for completion. Obtained heterocycles are isosteric analogues of various tetracyclic indole derived alkaloids