Sharif Digital Repository

The purpose of this study is to solve the problem of allocating relief teams to reopen damaged roads and remove debris from damaged areas after the earthquake for large cities. In the deteriorated areas of large metropolises, severe earthquakes may damage links, which causes some nodes to separate from the network. In this research, by using an Ant System meta-heuristic algorithm, a joint problem of damaged link restoration and demolished zone debries removal problem for search and rescue of the trapped population in an earthquake is solved. Ant System parameters are calibrated, and sensitivity analyses are done for the number of relief teams, earthquake intensity. The results of 1000... 

Nowadays, with the increasing need to design and manufacture parts with dimensions less than 1 millimeter in various fields such as medicine, drug delivery, microfluidics, precision casting, and many other areas, methods for manufacturing such parts have gained significant attention. Numerous studies have been conducted to develop 3D printing methods for manufacturing increasingly smaller parts, with optical 3D printing research being at the forefront. In this regard, researchers have enabled the achievement of smaller parts by developing in three areas: increasing the resolution of the light source, changing the resin compositions, and improving the accuracy and correction of image pixels.... 

With the rapid increase of energy consumption, energy problem has been a global issue, which must be faced with and solved. One way to prevent energy consumption is to reduce drag in the flow inside the pipes by using polymer additives; Because the Transportation of liquids using pipeline technology has its limitations, since turbulent flow inside the pipe involves a loss of energy. The net effect of this is that increasing the energy applied to the flow does not increase the flow rate. For this purpose, copolymers and terpolymers of hydrophilic acrylamide monomers along with hydrophobic styrene and hydrophilic maleic anhydride monomers were synthesized by reverse emulsion polymerization... 

Studying the performance of flow meters is of great importance in order to improve their quality. In this study, we are looking for an optimal design for a turbine flow meter in which the measurement accuracy, pressure drop and response speed indices are improved. For this purpose, a turbine flow meter with a diameter of 2 inches has been selected and its performance has been numerically modeled using computational fluid dynamics in a steady and transient state. By modeling the steady state, the measurement accuracy and pressure drop indices are obtained, and by modeling the transient state, the response time of the flow meter is obtained. In order to increase the accuracy of numerical... 

In this work a new innovative microfluidic system for the selection of motile sperms was developed. The novel aspect of this work is based on the fact the motile sperms follow microchannel walls. Immotile sperms are not able to follow curved paths and therefore their movement toward the outlet gets hindered and most of them could not reach to the outlet. But motile sperms, moving alongside the microchannel walls, reach to the outlet and get separated from the immotile ones. After designing, 3 microfluidic chips having curved microchannels with curvature radius of 150, 300 and 600 micrometer and one with a straight microchannel were fabricated using photolithography and soft lithography.... 

With the growing prevalence of cyber-attacks and the increasing complexity of communication networks, network security has become one of the most critical challenges in the field of information technology. Among the most effective tools for securing networks are Intrusion Detection Systems (IDS), which are capable of identifying abnormal behaviors and network-based attacks. However, many IDSs are vulnerable to adversarial attacks—carefully crafted manipulations intended to mislead their detection mechanisms. This thesis proposes an enhanced adversarial attack framework that leverages Generative Adversarial Networks (GANs), attention mechanisms, and active learning to generate deceptive... 

Implementation of various incentive-based demand response strategies has great potential to decrease peak load growth and customer electricity bill cost. Using advanced metering and automatic demand management makes it possible to optimize energy consumption, to reduce grid loss, and to release generation capacities for the sake of providing sustainable electricity supply, and reducing electricity bills for the customers. With these objectives, this thesis examines the previously suggested load scheduling programs in both residential and industrial sectors, and proposes new practical strategies for load management. This thesis has mainly focuses on three subdivisions of load management... 

The main purpose of this thesis is to analyze the total productive maintenance based on computerized maintenance management system. At first, a detailed study on total productive maintenance is performed and then the requirements of this maintenance strategy are specified. Also, a computerized maintenance management system is defined which can help total productive maintenance to reach to its requirements. Finally, a conceptual model and entity-relationship model for computerized maintenance management system data base has been created  

In this thesis, DC transmission of offshore wind farms is studied thoroughly. Various system configurations that are introduced in the literatures are discussed and their control scheme for normal conditions and grid faults are studied. Then, the HVDC transmission based on voltage source converter, located between a local offshore ac grid and the onshore ac system is investigated as the most practical choice. The HVDC linke circuit elements are calculated and the control strategies of the offshore and onshore converters are introduced. DFIGs are considered to be the best choice for the offshore wind turbine generators. Then, the system is simulated and the frequency of the offshore grid is... 

The main aim of this thesis is to develop the technical knowledge of designing and making active ingredients of domestically produced drugs, decreasing the costs, independency in producing these products, and checking outflow of currency. It also aims to reduce the financial challenges of patients who have to pay huge amounts for such drugs. Conducting research in the field of reverse engineering and using its definition, and attempt in made to get knowledge into the stages of product development process, to determine the technical standards associated with each stage, to recognize how knowledge is shared during this process, and to present some methods of establishing the infrastructure... 

Increase in growing concerns over environmental pollution and depletion of fossil fuel resources motivate the need for cleaner energy technologies and stimulate research in facilitating renewable energy systems. In recent years, photovoltaic systems have attracted great attention since they remove the need for energy storage systems and intermediate processess for energy conversion. However, high capital cost, low efficiency and low energy density per area of these systems, as compared with other technologies hinder its industrial use. To surmount these bottlenecks and improve technical performance of PV systems, it is crucial to optimize configuration of convertor connection and to improve... 

One of the main objectives in operating a power system is to maintain the system voltage properly to avoid equipment damage and transfer power efficiently. Automatic control of transmission network voltage provides significant improvements in security, quality and efficiency of power system operation. This thesis investigates coordinated voltage control of power systems in normal, alert and emergency states. The aim is to propose a comprehensive framework for real-time operation of practical power systems, ensuring secure operation of the system in the normal state and after occurrence of sever contingencies.
At the first, a new coordinated voltage control scheme is proposed to ensure... 

Today, organizations are surrounded by basic and continuous changes such as declining organizational resources, reduction of the production cycles, and the need for rapid adaption. Those organizations remain competitive while maintaining their productivity, that have following characteristics: accurately plan and assess their knowledge resources, create and absorb beneficial knowledge, store and organize their knowledge, disseminate knowledge to needed areas, and use knowledge in practice and decision making, to improve their products/services as well as their performance. Therefore, the human capital has been considered as knowledge owners and the most important organizational resource, on... 

Feyarabend’s philosophy of science is against method and rule such that he believes that “anything goes”. However, he sometimes applies the term “progress”. Reviewing his publications shows that from his point of view, progress is qualitative and relative. So, unlike other philosophers of science Feyarabend ignores the clarification of the concept; subsequently, his applications of the term “progress” are somewhat ambiguous. However, by studying his philosophy, one may realize what should be done to achieve progress in any sense. The affirmative aspect of Feyerabend’s philosophy, while highlights the social and ethical elements, considering his humanitarian outlook as well as his special... 

Increasing population and competition for producing various productions and also more consumption in recent decades, result in producing more wastes. Therefore effective and continuous waste management is essential for monitoring the process (from the wastes generation source to the waste disposal) and establishing the efficient strategies to reduce wastes. One of the major sources of waste generation is hospitals that cause lots of environmental problem unless they are managed properly.Recycling is an important element of waste management that can reduce costs by innovative and proper management. The purpose of this research is identification of recyclable plastic items and estimates the... 

Lack of financial sources for production and performing projects has been an effective issue in all governmental and non-governmental organizations. So, using a structure with capability of detecting and forecasting all expenses and costs, and being able to convert the mass of data into useful and instrumental reports for managerial decision such as estimating total cost, selecting the syntax of production and etc is obvious for recourse management of every organization. Among the various components of the cost engineering system, cost management system by recording and allocating cost is an important issue in efficiency of every cost engineering system.In this thesis, Automotive Industrial... 

Although laws vary in the competitive business world of today and the changing supply and demand parameters show that the process of delivering new products to market is very important.Most organizations today have found that spending more than ever on trusting in traditional competitive levers such as quality, cost reduction and differentiation in selling more products and services are not enough to be successful in market, instead notions such as speed, flexibility andagility can have a significant trend toward offering new products and services. There aresome good reasons for knew that organizations need new ways to develop their new products to survival, compete with its competitors and...