Sharif Digital Repository

In this paper, the effect of various arrangements of displacement, velocity and acceleration related weighting matrices on the performance of active control systems on nonlinear frames has been studied. Different arrangements of weighting matrices and feedback combinations of the response have been considered to design the active controllers using a single actuator for reducing the response of an eight-storey bilinear hysteretic frame under white noise excitations. The nonlinear Newmark-based instantaneous optimal control algorithm has been used, where the distributed genetic algorithm (DGA) is employed to determine the proper set of weighting matrices. For each set of feedback and weighting... 

Targeting on the selenium free, pure sulfide kesterite compound (CZTS) allows retention of the higher band gap nontoxic absorber for a single-junction solar cell. In this work, CZTS thin films were deposited by the PLD method and the Structural/optical properties, as well as Mott–Schottky analysis, were studied at different substrate temperatures. Without undergoing the sulfurization process, the single-phase CZTS thin film is prepared at 300 ℃. In the second step, a numerical simulation is performed using the solar cell capacitance simulator to study the effect of the grading layer of MoS(Se)2 on the rear side of pure sulfide kesterite based solar cells. The device with a MoSe2 coated... 

In the present study, bubble-driven magnesium-based micromotors were fabricated through a shading method, and the potential of magnetic guidance of magnesium-based Janus micro/nanomotors through functionalization with superparamagnetic iron oxide nanoparticles (SPIONs) was investigated for the first time. SPIONs had physical electrostatic attraction with the positively charged magnesium spheres due to negative charges on their surfaces. It was also found that upon applying a field gradient, the micromotors’ velocity increased by 13% unlike other magnetically navigated spherical magnesium-based micromotors which only show a change in direction. In this work the cytotoxicity of the moving... 

A precise and compact tubular ultrasonic motor driven by a single-phase source is proposed and tested in this study. The motor is designed by modeling a motor stator in FEM software. The motor fabricated according to the design is tested experimentally and its working characteristics including speed and torque are measured and presented. The maximum speed and torque of the motor are 59 rpm and 0.28 mN m at 80 Vpp of applied voltage. The proposed motor possesses advantages such as a simple and compact structure with application in the fields of robotics, space, medical devices and high-resolution stages, among others. The proposed motor is a good candidate for applications where accurate... 

Ultrasonic motor working with coupled in-plane and out-of-plane vibration modes of rectangular plate is proposed and experimentally investigated. Thanks to its unique configuration, proposed motor provides large contact area between stator and rotor of motor which can reduce wear and enhance motor life-time. The proposed motor is designed using finite element method and according to the design, a prototype is fabricated and its working characteristics such as speed, normal and driving force and working frequency are measured. Overall dimension of designed prototype is 49 × 14 × 2 mm, working frequency of motor is 49.6 kHz, no-load speed and stall force of motor are 122 rpm and 0.32 mN m at... 

Background & Objective: Aluminum (Al) is used in different industries to produce cosmetics, supplements, drugs, food packaging, toothpaste, kitchen utensils, and antiperspirants. Uterine fibroid (UF) is women's most prevalent benign tumor during the reproductive ages. Since Al can accumulate in the body's organs, it may play a role in the pathogenesis of UF. This study aimed to measure Al levels in serum and uterine samples (normal uterine tissue of control and UF patients, and leiomyoma of UF patients). Materials & Methods: In this descriptive study, we included ten women who underwent hysterectomy (five women due to UF and five women for a reason other than UF). Samples were obtained from... 

This study aimed to prepare nanoporous anodic alumina on AA3003-H14 aluminum alloy using a mild anodization process with minimal working voltage and treatment time. The microstructural features, mechanical properties, and tribocorrosion behavior of the coatings were assessed to determine the optimum conditions for the fabrication of nanoporous anodic alumina on AA3003-H14 alloy. The microstructural analysis showed both uniform and nonuniform pore nucleations during anodization in H2SO4/C2H2O4, H2SO4/H2CrO4, and EG/H2O/NH4F electrolytes, where the optimal nanoporous structure with an average thickness, porosity, pore diameter, and interpore distance of 382 nm, 19%, 16 nm, and 35 nm,... 

Creating laser texture on dental implants is a novel method for accelerating osseointegration and prolongation of lifespan. The purpose of this research was twofold: (1) Creating intersecting lines pattern with different angles (0°, 15°, 30°, 45°, 60°, 75°, and 90°) on the surface of Ti6Al4V, using pulse Nd:YAG laser with a wavelength of 1064 nm and a pulse length of 170 ns and (2) comparing optical and SEM images, EDS analyses, contact angles (CAs), and surface free energies (FEs) for different intersecting lines angles. CA and FE depended on the intersecting lines angle according to Y = Y 0 + A sin (x B + C), where Y is the CA or FE; x is the intersecting lines angle; and Y0, A, B, and C... 

Systemic chemotherapy has lost its position to treat cancer over the past years mainly due to drug resistance, side effects, and limited survival ratio. Among a plethora of local drug delivery systems to solve this issue, the combinatorial strategy of chemo-hyperthermia has recently received attention. Herein we developed a magneto-thermal nanocarrier consisted of superparamagnetic iron oxide nanoparticles (SPIONs) coated by a blend formulation of a three-block copolymer Pluronic F127 and F68 on the oleic acid (OA) in which Curcumin as a natural and chemical anti-cancer agent was loaded. The subsequent nanocarrier SPION@OA-F127/F68-Cur was designed with a controlled gelation temperature of... 

Background: Melittin, a peptide component of honey bee venom, is an appealing candidate for cancer therapy. In the current study, melittin, melittin-loaded niosome, and empty niosome had been optimized and the anticancer effect assessed in vitro on 4T1 and SKBR3 breast cell lines and in vivo on BALB/C inbred mice. "Thin-layer hydration method" was used for preparing the niosomes; different niosomal formulations of melittin were prepared and characterized in terms of morphology, size, polydispersity index, encapsulation efficiency, release kinetics, and stability. A niosome was formulated and loaded with melittin as a promising drug carrier system for chemotherapy of the breast cancer cells.... 

In the present study, the structural features, corrosion behavior, and in vitro bioactivity of TiO 2 nanotubular arrays coated on Ti–6Al–4V (Ti64) alloy were investigated. For this reason, Ti64 plates were anodized in an ammonium fluoride electrolyte dissolved in a 90:10 ethylene glycol and water solvent mixture at room temperature under a constant potential of 60 V for 1 h. Subsequently, the anodized specimens were annealed in an argon gas furnace at 500 and 700 °C for 1.5 h with a heating and cooling rate of 5 °C min −1 . From XRD analysis and Raman spectroscopy, a highly crystalline anatase phase with tetragonal symmetry was formed from the thermally induced crystallization at 500 °C.... 

Polyphenol-based materials have attracted wide-spread interest from academic and industrial communities because of their unique structure and physicochemical properties. Tannic acid (TA), as a polyphenolic phytochemical with high level of galloyl groups, interacts with various substances (proteins, polysaccharides, and metals) through several modes including hydrogen bonding, hydrophobic and electrostatic interactions. Such hybrid or hybrid-like systems allow the preparation of various advanced materials with promising applications in medicine. In this review, we highlight the recent advances of TA-incorporated materials in medical applications including drug delivery, tissue engineering,... 

In this research, a series of numerical simulations were conducted utilizing computational fluid dynamics (CFD) software in order to predict the heat transfer performance of queues nanofluids containing clove-treated graphene nanoplatelets (CGNPs) flowing in a horizontal stainless steel heated pipe. The GNPs were covalently functionalized with clove buds using free radical grafting reaction using an eco-friendly process. The advantage of this synthesis method was that it did not use hazardous acids, which are typically used in traditional treatment methods of carbon nanostructures. The thermo-physical properties of the aqueous nanofluids obtained experimentally were used as inputs for the... 

In the present work we obtained a series of NIR luminescent platinum(II) complexes with a pincer N^N^C ligand based on the conjugated {benzoimidazo[1,2-a]pyrazine} system with the [Pt(N^N^C)L]n+ structural motif (L = phosphine, alkynyl or pyridine-type ligands). We have also synthesized two complexes with bidentate phosphines that demonstrate different types of coordination: 1) as chelating ligand (in case of 1,2-bis(diphenylphosphino)benzene), that led to de-coordination of pyridine ring of N^N^C ligand and formation of a [Pt(N^C)dppb]+ complex; 2) as a bridging ligand (in case of bis(diphenylphosphino)methane) between two {Pt(N^N^C)} fragments in a dimeric complex of type... 

The combined action of ultraviolet irradiation and microwave heating onto acetonitrile solution of [Re((Formula presented.))(CO)3(NCMe)]OTf ((Formula presented.) =phenantroline and neocuproine) afforded cis,trans-Re((Formula presented.))(CO)2(NCMe)2]+ acetonitrile derivatives. Substitution of relatively labile NCMe with a series of aromatic N-donor ligands (pyridine, pyrazine, 4,4’-bipyridine, N-methyl-4,4’-bipyridine) gave a novel family of the diimine cis,trans-[Re((Formula presented.))(CO)2(L)2]+ complexes. Photophysical studies of the obtained compounds in solution revealed unusually high absorption across the visible region and NIR phosphorescence with emission band maxima ranging from... 

A Deza graph with parameters (n, k, b, a) is a k-regular graph with n vertices such that any two of its vertices have b or a common neighbours, where b ≥ a. In this paper we investigate spectra of Deza graphs. In particular, using the eigenvalues of a Deza graph we determine the eigenvalues of its children. Divisible design graphs are significant cases of Deza graphs. Sufficient conditions for Deza graphs to be divisible design graphs are given, a few families of divisible design graphs are presented and their properties are studied. Our special attention goes to the invertibility of the adjacency matrices of Deza graphs. © 2020, © 2020 Informa UK Limited, trading as Taylor & Francis Group  

A Deza graph with parameters (Formula presented.) is a k-regular graph with n vertices such that any two of its vertices have b or a common neighbours, where (Formula presented.). In this paper we investigate spectra of Deza graphs. In particular, using the eigenvalues of a Deza graph we determine the eigenvalues of its children. Divisible design graphs are significant cases of Deza graphs. Sufficient conditions for Deza graphs to be divisible design graphs are given, a few families of divisible design graphs are presented and their properties are studied. Our special attention goes to the invertibility of the adjacency matrices of Deza graphs. © 2020 Informa UK Limited, trading as Taylor &...