Sharif Digital Repository

In the tropics, high rainfalls and hot temperatures cause the formation of highly weathered acid soils with low pH buffering capacity (pHBC). Such soils are prone to nutrient losses via leaching, surface runoff, and volatilization. The poor nutrient retention of the highly weathered soils can cause environmental pollution in water bodies and detrimentally affect aquatic ecosystem. A preliminary study was conducted by mixing an acid soil (Bekenu series, Typic Paleudults) with Calciprill (80 %, 90 %, and 100 % Ca saturation) and sodium silicate (90, 105, 120, 135, and 150 kg ha−1) to determine the effects of the amendments on pH and pHBC of Bekenu series. Furthermore, a soil incubation study... 

Macrobenthos animals are an architect of a variety of roles including as a part of the food web of aquatic ecosystem and improve the structure of the sediment and can determine the quality of the water. Macrobenthos communities have shown their potential role in biomonitoring to analyze contaminant loads due to high sensitivity to organic pollutants along the coastal water area. Besides, it is also used to determine heavy metals and petroleum hydrocarbons in coastal water due to their long sustainability with chemicals are primarily related with industrial calamities and occupational activities. Based on above perspectives, this systematic review has shown interesting findings about the... 

A variety of bacterial communities can be found in heavy metal leachate-contaminated soil. These bacteria might have molecular defenses that allow them to endure a high heavy metal concentration. However, there aren't enough datasets on bacterial populations to be exploited for bioremediation, especially the biotreatment of leachate contaminated with heavy metals. This research examined the diversity of the bacterial population in heavy metal leachate-contaminated soil from the Jalan Lipis Sanitary Landfill in Pahang, Malaysia. The soil samples were taken from three (3) different locations. pH analysis showed that the heavy metal leachate-contaminated soil possesses alkaline pH. ICPMS... 

Use of nitrogen (N) fertilizers is gaining popularity to meet crop nutrient requirement for sustaining the food security of the increasing global population. However, improper management of N fertilizers in acid soils causes leaching and surface runoff because of excessive rainfalls and poor N retention in the tropics in particular. This results in N pollution in water bodies (also known as eutrophication), which degrades water quality to the detriment of aquatic ecosystems near farms. Thus, there is a need for using inorganic soil amendments such as Calciprill and sodium silicate to improve soil N adsorption because of the alkalinity and ability of these amendments to retain N for... 

Drying is a common practice for delaying deterioration, preserving quality, and easier prolonged storage of agricultural products. According to the climatic and geographical conditions of Arsanjan County, Fars, Iran. So far, many studies have been conducted on the design and use of various barriers on absorber plates with the aim of increasing heat exchange and subsequently increasing the efficiency of air heaters and solar dryers. However, the effect of using the metal of the sewing machine bobbin on the performance of these dryers has not been studied yet. Therefore, in this study, for the first time, this metal and also pipes containing PCM (phase change material) were used as a barrier... 

Multiple blood collection from an adult Danio rerio is important in most of metabolic studies. The method allows researcher to profile the metabolic dynamic from an individual fishes, which contribute to a high resolution of dataset. Currently, several devices have been developed for the purpose of blood withdrawal from Danio rerio. Limited accessibility to it hindering the log phase development of Danio rerio based studies. This study shows that the multiple blood collection from an adult Danio rerio can be achieved to the highest survival rate (94.75 %) using the in-house fabricated Z-fish needle. The fabricated device is cheaper and can be accessible in any developing Danio rerio... 

Observing the growing energy demand of modern societies, many countries have rec-ognized energy security as a looming problem and renewable energies as a solution to this issue. Renewable hydrogen production is an excellent method for the storage and transfer of energy generated by intermittent renewable sources such as wind and solar so that they can be used at a place and time of our choosing. In this study, the suitability of 15 cities in Fars province, Iran, for renewable hydrogen production was investigated and compared by the use of multiple multi-criteria decision-making methods including ARAS, SAW, CODAS, and TOPSIS. The obtained rankings were aggregated by rank averaging, Borda... 

In the view of the latest status and the potential of developing wind energy in South Africa, the present study aims to perform technical–economic–environmental analysis on a wind turbine system with HOMER software using the 20-years average data of the wind speed obtained from NASA's database, for providing the electricity to residential buildings. The results showed that the Port Elizabeth station, had the lowest levelized cost of electricity (LCOE) with the value of -0.363 $/kWh when using the EOLO wind turbine, and the Bloemfontein station had the highest LCOE with the value of 1.601 $/kWh when using the Turby wind turbine. The results from the step-wise assessment ratio analysis... 

Morphology measurements could be used as a scale when converted into length-length or length-weight relationships. Size relationships could indicate variability for health and growth within horseshoe crab populations. However, in previous attempts, the selection of morphology units changed with every population. Basically, mean, and standard deviation was employed and median values became the baseline for normal classification. In this study, a linear equation was extracted for each morphology measurement. After insert-ing the mean values into the equation, a huge majority of Carcinoscorpius rotundicauda were within the normal or enlarged size scale. The similar was achieved for Tachypleus... 

Solar heater has been known as an application of the solar thermal energy that is commonly employed for water heating. Purpose of this research is to introduce a conceptual model for employing solar water heaters (SWHs) in Yazd, Iran. Moreover, structural equation modeling (SEM) is used for assessing effect(s) of the available parameters on the suggested model. Political-cultural-social issues, economic issues, financial support, geographic location, infrastructure, and interactions were assessed as the independent variables of the study. AMOS was used to implement the processes and design the research questionnaire. According to SEM, the dependent variable “interaction” via “economic... 

In this paper, we analyze the performance of a nonlinear two-photon-absorption (TPA) receiver and compare its performance with that of a single-photon-absorption (SPA) receiver in the context of spectral-phase-encoded optical code-division multiple access (CDMA) technique. The performances for the above systems are evaluated for two different transmission scenarios, namely, asynchronous and slot-level synchronous transmitters. Performance evaluation includes different sources of degradation such as multiple-access interference, noise due to optical amplification, shot noise, and thermal noise. In obtaining the performance, the mean and variance of the received signal in each of the above... 

In this paper, the authors study the performance of a two-photon absorption (TPA) receiver in a typical communication system employing an optical amplifier. For the study, the authors develop a comprehensive performance analysis, taking into account noises due to an optical amplifier, shot noise, and thermal noise, using Gaussian approximation technique. In evaluating the performance of the system using this technique, the mean and the variance of the received signal will be derived. Comparing the results of receivers using the TPA process with that of a typical single-photon absorption (SPA) structure leads the authors to conclude that TPA receivers can be used when the speed of the... 

This paper describes a study of the performance of various configurations for placing multiple optical amplifiers in a typical coherent ultrashort light pulse code-division multiple access (CULP-CDMA) communication system using the additive noise model. For this study, a comprehensive performance analysis was developed that takes into account multiple-access noise, noise due to optical amplifiers, and thermal noise using the saddle-point approximation technique. Prior to obtaining the overall system performance, the input/output statistical models for different elements of the system such as encoders/decoders, star coupler, and optical amplifiers were obtained. Performance comparisons... 

In this article, we propose a lightweight security scheme for ensuring both information confidentiality and transmission resiliency in the Internet-of-Things (IoT) communication. A single-Antenna transmitter communicates with a half-duplex single-Antenna receiver in the presence of a sophisticated multiple-Antenna-Aided passive eavesdropper and a multiple-Antenna-Assisted hostile jammer (HJ). A low-complexity artificial noise (AN) injection scheme is proposed for drowning out the eavesdropper. Furthermore, for enhancing the resilience against HJ attacks, the legitimate nodes exploit their own local observations of the wireless channel as the source of randomness to agree on shared secret... 

This paper describes the results of an experimental and numerical study that focused on multi-directional behavior of unreinforced masonry walls and established the requisite of the related proposed design equations. The tests were conducted following several sets of multi-directional loading combinations imposed on the top plane of the wall along with considering monotonic and cyclic quasi-static loading protocols. Various boundary conditions, representing possible wall–roof connections, were also considered for different walls to investigate the influence of rotation of the top plane of the wall on the failure modes. The results of the tests were recorded with a host of high precision data... 

An optical amplifier followed by a bistable element is statistically analyzed. To this end, the birth-death-immigration model and the coupled mode theory are used to characterize the amplifier and the bistable element, respectively  

Different types of macro-elements have been proposed to simulate the behavior of unreinforced masonry (URM) structures under seismic loads. In many of these, macro-elements URM walls are replaced with beam elements with different hysteretic behaviors. The effect of out-of-plane loading or change of gravity load due to the overturning moment is usually not considered in the behavior of these macro-elements. This article presents interaction curves for bidirectional loadings of unreinforced masonry walls to investigate the importance of these factors. Two parameters are systematically changed to derive the interaction curves for a wall with specific dimensions, including compressive traction... 

The present work developed a mixed-mode cohesive zone model (CZM) with a mode I failure criterion to predict the delamination bending loads of multilayer, composite printed circuit boards (PCBs) assembled with soldered ball grid array (BGA) components that were reinforced with an underfill epoxy adhesive. Two different delamination modes were observed in these microelectronic assemblies: delamination at the interface between the solder mask and the first conducting layer of the PCB, and PCB subsurface delamination at the interface between the epoxy and glass fibers of one of the prepreg layers. The cohesive parameters for each of the two crack paths were obtained from fracture tests of... 

The present work developed a mixed-mode cohesive zone model (CZM) with a mode I failure criterion to predict the delamination bending loads of multilayer, composite printed circuit boards (PCBs) assembled with soldered ball grid array (BGA) components that were reinforced with an underfill epoxy adhesive. Two different delamination modes were observed in these microelectronic assemblies: delamination at the interface between the solder mask and the first conducting layer of the PCB, and PCB subsurface delamination at the interface between the epoxy and glass fibers of one of the prepreg layers. The cohesive parameters for each of the two crack paths were obtained from fracture tests of... 

In this paper, we analyze the sensitivity degradation of a system due to various orders of chromatic dispersion. To do this, the power penalty of the uncoded and encoded pulse of a coherent ultrashort light pulse Code Division Multiple Access (CDMA) communication system due to various orders of chromatic dispersions are analyzed. Analysis of uncoded pulse shows that the power penalty is unacceptably high when second order dispersion is not compensated. However we can obtain acceptable level of power penalties while compensating second and third order dispersion. Also, due to the high order of dispersion, the power of encoded pulse decreases as it propagates through the fiber which leads to a...