Sharif Digital Repository

Recently, interaction of electromagnetic waves with conducting interfaces has been studied and several applications have been proposed. For instance, new type of photonic crystals similar to Kronig-Penny electronic crystals has been implemented by using these structures. In these structures a free two dimensional interface charge layer is generated at the dielectric interfaces and interesting phenomena are observed. In this manuscript, the effect of finite charge layer thickness and its asymptotic behavior toward conducting interface, where the thin charge layer is modelled via a surface conductivity σs, is numerically studied for the first time. Two different regimes are considered: first,... 

The outlook of brain-computer interfacing (BCI) is very bright. The real-time, accurate detection of a motor movement task is critical in BCI systems. The poor signal-to-noise-ratio (SNR) of EEG signals and the ambiguity of noise generator sources in brain renders this task quite challenging. In this paper, we demonstrate a novel algorithm for precise detection of the onset of a motor movement through identification of event-related-desynchronization (ERD) patterns. Using an adaptive matched filter technique implemented based on an optimized continues Wavelet transform by selecting an appropriate basis, we can detect single-trial ERDs. Moreover, we use a maximum-likelihood (ML),... 

Planar grating diffraction analysis based on Legendre expansion of electromagnetic fields is reported. In contrast to conventional RCWA in which the solution is obtained using state variables representation of the coupled wave amplitudes; here, the solution is expanded in terms of Legendre polynomials. This approach, without facing the problem of numerical instability and inevitable round off errors, yields well-behaved algebraic equations for deriving diffraction efficiencies, and can be employed for analysis of different types of gratings. Thanks to the recursive properties of Legendre polynomials, for longitudinally inhomogeneous gratings, wherein differential equations with non-constant... 

In this paper, an analysis of the harmonic contents of the optical output power for an in-plane single mode laser diode is performed, and the results are described in detail. In the first step, the absolute value of power for each harmonic is obtained in terms of various laser diode parameters, and the variations of external parameters, such as modulation current, bias current and frequency, are discussed. The analysis is done by direct solution of the rate equations of an arbitrary laser diode for carrier and photon densities. It is known that the optical power has a nonlinear dependence on frequency, and the maximum optical power of each harmonic is attained in its resonance frequency. The... 

We have performed an analysis of harmonic contents of the optical output power for a diode laser and described the results in details. In the first step the absolute value of power for each harmonic is obtained in terms of various diode laser parameters, and the variations of external parameters such as modulation current, bias current and frequency are discussed. The analysis is done by direct solution of rate equations of an arbitrary diode laser for carrier and photon densities. We conclude that the maximum power occurs at isolated peaks and their loci have been investigated and shown to be predictable by theory. It is known that the optical power has a nonlinear dependence on frequency,... 

The brain-computer interfacing (BCI), a platform to extract features and classify different motor movement tasks from noisy and highly correlated electroencephalogram signals, is limited mostly by the complex and power-hungry algorithms. Among different techniques recently devised to tackle this issue, real-time onset detection, due to its negligible delay and minimal power overhead, is the most efficient one. Here, we propose a novel algorithm that outperforms the state-of-the-art design by sixfold in terms of speed, without sacrificing the accuracy for a real-time, hand movement intention detection based on the adaptive wavelet transform with only 1 s detection delay and maximum... 

In this paper optical filters based on photonic resonant tunneling effect are analyzed by using the polynomial expansion method. Amplitude and phase response together with their dependency on the physical parameters of the filters are also investigated. These steep-edge filters show low insertion loss amplitude response, and linear phase variation in their passband, a suitable feature for WDM and DWDM applications where constant time delay and dispersion free devices are needed. Two kinds of filters, namely discrete level and continuous profile filters are introduced. These structures can be analyzed and designed by using Transfer Matrix Method. However, this approach suffers from inaccuracy... 

A novel plane-wave-based approach for analytical treatment of dispersive relation is developed and applied to analyze the behavior of electromagnetic waves in plasmonic-photonic-crystal slabs. Here Drude model is used for describing frequency dependent permittivity of plasma rods in host dielectric medium. In the present work, dispersion relation below and above the light line is calculated approximately by means of Maxwell-Garnett effective medium and Revised Plane Wave Method (RPWM). The eigen-functions are then used in Revised Guided Mode Expansion (RGME) as the set of orthonormal bases. Following this procedure, the accurate band structure is obtained. In these kind of methods there are... 

Brain Computer Interface (BCI) systems, which are based on motor imagery, enable humans to command artificial peripherals by merely thinking about the task. There is a tremendous interest in implementing BCIs on portable platforms, such as Field Programmable Gate Arrays (FPGAS) due to their low-cost, low-power and portability characteristics. This article presents the design and implementation of a Brain Computer Interface (BCI) system based on motor imagery on a Virtex-6 FPGA. In order to design an accurate algorithm, the proposed method avails statistical learning methods such as Mutual Information (MI), Linear Discriminant Analysis (LDA), and Support Vector Machine (SVM). It also uses... 

A Legendre polynomial expansion of electromagnetic fields for analysis of layers with an inhomogeneous refractive index profile is reported. The solution of Maxwell's equations subject to boundary conditions is sought in a complete space spanned by Legendre polynomials. Also, the permittivity profile is interpolated by polynomials. Different cases including computation of reflection-transmission coefficients of inhomogeneous layers, band-structure extraction of one-dimensional photonic crystals whose unit-cell refractive index profiles are inhomogeneous, and inhomogeneous planar waveguide analysis are investigated. The presented approach can be used to obtain the transfer matrix of an... 

Brain Computer Interface (BCI) systems, which are based on motor imagery, enable humans to command artificial peripherals by merely thinking about the task. There is a tremendous interest in implementing BCIs on portable platforms, such as Field Programmable Gate Arrays (FPGAS) due to their low-cost, low-power and portability characteristics. This article presents the design and implementation of a Brain Computer Interface (BCI) system based on motor imagery on a Virtex-6 FPGA. In order to design an accurate algorithm, the proposed method avails statistical learning methods such as Mutual Information (MI), Linear Discriminant Analysis (LDA), and Support Vector Machine (SVM). It also uses... 

Analytical analysis of straight single-line defect optical waveguides in two dimensional photonic crystals based on expanding electromagnetic fields in terms of Hermite polynomials is reported. This novel electromagnetic field expression is substituted in Helmholtz equation, a new set of linear ordinary differential equations with variable coefficients are obtained, and by employing differential transfer matrix method; defect modes, i.e. the guided modes propagating in the line defect waveguide, are analytically derived. The validity of the results obtained by applying the proposed approach are confirmed by comparing them to those derived by using finite difference time domain method  

A novel approach for photonic crystals devices analysis, based on perturbation theory is reported. In this method the photonic crystal device is considered as the superposition of a parent lattice and a perturbing one. Then the solution is investigated in terms of the eigensolutions of the parent lattice. This way, one can easily obtain analytic expressions within the first order perturbation, describing the effects of different parameters on the eigensolutions of the structure. The perturbation theory employed in this work is typical of what is conventionally used in quantum mechanics literature. The proposed method is explicit, works fast, and does not involve complicated numerical... 

Low power operation and high speed have always been desirable in applications such as data processing and telecommunications. While achieving these two goals simultaneously, however, one encounters the well-known powerbandwidth trade-off. This is here discussed in a typical bistable switch based on a two-dimensional photonic crystal with Kerr type nonlinearity. The discussion is supported by the nonlinear finite difference time domain (FDTD) simulation of a direct coupled structure with a home-developed code. Two cases of working near resonant and off- resonant are simulated to compare the power and the speed of the device in the two cases. It is shown that working nearresonance reduces the... 

Three-dimensional vectorial diffraction analysis of phase and amplitude gratings in conical mounting is presented based on Legendre expansion of electromagnetic fields. In the so-called conical mounting, different fields components are coupled and the solution is not separable in terms of independent TE and TM cases. In contrast to conventional RCWA in which the solution is obtained using state variables representation of the coupled wave amplitudes by expanding space harmonic amplitudes of the fields in terms of the eigenfunctions and eigenvectors of the coefficient matrix defined by rigorous coupled wave equations, here the solution of first order coupled Maxwell's equations is expanded in... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function...