Sharif Digital Repository

Microbial Enhanced Oil Recovery (MEOR) as a tertiary process employs microorganisms and their metabolites to reduce the residual oil saturation of the reservoir mainly through interfacial tension (IFT) reduction and wettability alteration. In spite of its great potential and the mentioned advantages, application of MEOR has been limited because of the lack of practical convincing experimental results. In this study, the effects of MEOR process on wettability changes and the reduction of residual oil saturation have been examined by providing microscopic visualization of two phase flow in transparent glass micromodels. Biosurfactant producing bacterial strain (Enterobacter cloacae) was... 

An electroflotation technique was utilized to reclaim the surfactant molecules from oil-in-water emulsions. A two-staged separation mechanism was suggested to describe the process. The surfactant recovery efficiencies were higher than 70% after 30 min treatment. The method could be an effective process in recycling surfactants from the emulsions existing in industrial wastes. This is an abstract of a paper presented at the 8th World Congress of Chemical Engineering (Montreal, Quebec, Canada 8/23-27/2009)  

Mechanical fracture is a common cause of failure for 3-unit dental bridges, particularly, the all-ceramic structures. The purpose of the present study was to evaluate the effect of convergence angles of the abutments on the distribution of the mechanical stresses, within the prosthesis and at the restoration-abutments interface of a 3-unit all-ceramic bridge. The 3-D geometrical data of the second premolar and first and second molar teeth were obtained using ATOS scanner system and utilized for reconstruction of a surface model of the 3-unit bridge in I-Deas as solid modeler software. This was then transferred to MSC/Nastran software for mesh generation and finite element analysis. Two FE... 

Fungal delignification can be considered as a feasible process to pre-treat lignocellulosic biomass in biofuel production, if its performance is improved in terms of efficiency thorough a few modifications. In this study, Trichoderma viride was utilized to investigate the effect of wet-milling, addition of surfactant (Tween 80) and optimization of operating factors such as temperature, biomass to liquid medium ratio and glucose concentration on biodelignification of rice straw. Next, the enzymatic hydrolysis of pretreated biomass was studied at various pretreatment times. Results revealed that the wet milling and addition of surfactant increases the lignin removal about 15% and 11%,... 

The power law logistic model was utilized to investigate the growth of a hydrocarbon assimilating bacterium on a water-insoluble substrate. To achieve this end, population dynamics of Bacillus licheniformis MS3 in a medium containing n-decane as the sole carbon source was monitored for 30 h. Different initial biosurfactant concentrations and shaking rates were employed to examine the role of mass transfer in the cell growth and the consequent hydrocarbon biodegradation. The amount of n-decane degraded in the system was detected by gas chromatography at the end of the incubation period. The results revealed that when mass transfer limitations were lessened through addition of an initial... 

To obtain potentially applicable microorganisms to an effective in situ microbial enhanced oil recovery operation, bacteria that were compatible with the harsh conditions of a petroleum reservoir were isolated from a crude oil sample. The application of an oil spreading technique showed that all of the isolates were capable of producing biosurfactants from both the glucose and crude oil as carbon sources. The secreted biosurfactants could at least reduce the surface tension 20 mN/m and for one of the isolates; the surface tension value dropped below 40 mN/m. In addition, the contact angle measurements revealed that the produced biosurfactants could effectively alter the wettability of the... 

To describe immobilized cells in porous microcapsule membranes with straight pores, a novel model called corrugated parallel bundle model (CPBM) was utilized. In this model, a network was developed with 10 main pores each composing 10 pore elements. Cell growth kinetic in the network was examined using non-structural models. Effectiveness factor and pore plugging time were calculated by solving reaction-diffusion equation set via finite difference method. The findings revealed that diffusion coefficient for lower order reactions will create a lesser impact on the reduction of effectiveness factor. These findings also indicated that the use of such supporting carrier for cell immobilization... 

Microbial enhanced oil recovery (MEOR) is receiving renewed interest worldwide in recent years as a viable method while not damaging the reservoir is proven to be remarkably effective, however to some extent costly. This method is based on microorganisms' activities to reduce residual oil of reservoirs, which is dependent on behavior of inherent microorganisms or injection of bioproduct of external microorganisms. In this work, five bacterial species were taken from MIS crude oil that is one of the aging Persian fractured reservoirs. These microorganisms are substantially strong in increasing oil recovery especially by reducing IFT and other MEOR mechanisms such as change of wettability of... 

Microbial EOR (MEOR) is receiving renewed interest worldwide. The method is based on microorganisms' activities to reduce residual oil of reservoirs, which is dependent on behavior of inherent microorganisms or injection of bioproduct of external microorganisms. Five bacterial species were taken from MIS crude oil that is one of the aging Persian fractured reservoirs. Visualization experiments were carried out to examine the behavior of MEOR in micromodels designed to resemble the fractured system: static and dynamic. A new surface sample of the MIS oil was taken at the well head and physical specifications were measured at the lab. This was fairly light oil with API gravity of 42.5. The... 

Rock samples from the Asmary outcrop formation of the Ahwaz oil rich zone with a porosity of 16% and permeability of 1 md and MIS crude oil with an API value of 42.5 and moderate asphaltene content of 3%, were used to study the effect of the incubation time and flow rate of the displacing fluid in MEOR operations. Five species of rod shaped, gram positive, thermophile and facultative bacteria were isolated and purified from the crude. Due to the high sweep efficiency prevailing in the core flooding system, the effect of the displacing brine flow rate on the oil recovery efficiency was found not to be significant. On the other hand, a 100% increase in incubation time from 7 to 14 days... 

The physical properties and chemical structure of a new biosurfactant (licheniformin) produced by Bacillus licheniformis MS3 were investigated. The purified biosurfactant was identified as a lipopeptide with amino acid sequence of Gly, Ala, Val, Asp, Ser, Gly, Tyr and a lactone linkage between the carboxyl group of Aspargine and hydroxyl group of Tyrosine residue. The fatty acid moiety was attached to N-terminal amino acid residue through an amide bond. The purified licheniformin could lower the surface tension of water from 72 to 38 mN/m at concentrations higher than 15 μg/mL and its relative emulsion volume (EV%) was equal to 36%. It also showed stable surface activity over a wide range of... 

As the first part of a continued research on conversion of carboxymethyl cellulosesodium salt (CMC) to useful biopolymer-based materials, large numbers of cyanide functional groups were introduced onto CMC by grafting with polyacrylonitrile (PAN). The graft copolymerization reactions were carried out under nitrogen atmosphere using ceric ammonium nitrate (CAN) as an initiator. Evidence of grafting was obtained by comparing FTIR spectra of CMC and the graft copolymer as well as solubility characteristics of the products. The synthetic conditions were systematically optimized through studying the effective factors including temperature and concentrations of initiator, acrylonitrile monomer,... 

Background & Objective: A sensor network is composed of a large number of sensor nodes that are deployed to perform measurement and/or command and control in a field. Sensor nodes are battery powered devices and replacement or recharging of their batteries may not be feasible. One of the major challenges with sensory wireless networks is excessive energy consumption in nodes. Clustering is one of the methods that has been offered for resolving this issue. In this paper, we pursue evolutionary clustering and propose a new fitness function that har-nesses multiple propagation indices. Methods: In this paper we develop an efficient fitness function by first selecting the best clusters, and then... 

Polyacrylonitrile (PAN) grafted chitosan was prepared by ceric-initiated graft polymerization of acrylonitrile onto chitosan in a homogenous medium. The copolymer chitosan-g-PAN product was then hydrolyzed to yield a novel smart hydrogel (H-chitoPAN) with superabsorbing properties. The influence of add-on values as well as temperature and time of hydrolysis of the initial chitosan-g-PAN on swelling behavior of the hydrogel was evaluated in water and various salt solutions. The swelling kinetics of the superabsorbing hydrogel was studied as well. The hydrogels exhibited ampholytic and pH-sensitivity characteristics. Several sharp swelling changes were observed in lieu of pH variations in a... 

In [1], [2] it is shown that the minimum broadcast rate of a linear index code over a finite field Fq is equal to an algebraic invariant of the underlying digraph, called minrankq. In [3], it is proved that for F2 and any positive integer k, minrankq(G) ≤ k if and only if there exists a homomorphism from the complement of the graph G to the complement of a particular undirected graph family called 'graph family {Gk}'. As observed in [2], by combining these two results one can relate the linear index coding problem of undirected graphs to the graph homomorphism problem. In [4], a direct connection between linear index coding problem and graph homomorphism problem is introduced. In contrast to... 

Developing scaffolds that can provide cells and biological cues simultaneously in the defect site is of interest in tissue engineering field. In this study, platelet lysate (PL) as an autologous and inexpensive source of growth factors was incorporated into a cell-laden injectable hyaluronic acid-tyramine (HA-TA) hydrogel. Subsequently, the effect of platelet lysate on cell attachment, viability and differentiation of human mesenchymal stem cell (hMSCs) toward chondrocytes was investigated. HA-TA conjugates having a degree of substitution of 20 TA moieties per 100 disaccharide units were prepared and crosslinked in the presence of horseradish peroxidase and low concentrations of hydrogen... 

Platelet lysate (PL), a blood product that contains high concentrations of growth factors (GFs), can be considered as a cost-effective source of multiple GFs. In this study, hyaluronic acid (HA) based microgels were developed for delivery of PL proteins. Spherical microgel were prepared using a water in oil emulsion method. First, hyaluronic acid was grafted with tyramine groups, after which prepared microdroplets were crosslinked via an enzymatic reaction in the presence of hydrogen peroxide and horseradish peroxidase. Because of electrostatic interactions, these microgels are promising carriers for positively charged proteins entrapment like most of the GFs. When microgels are incubated in...