Loading...
Search for:
bidaki--amin
0.135 seconds
Total 285 records
Effect of hydrazine hydrate on the luminescence properties of MPA capped CdTe nanocrystals in hot injection method
, Article Journal of Luminescence ; Vol. 156, issue , 2014 , p. 235-239 ; Marandi, M ; Zare Bidaki, H ; Sharif University of Technology
2014
Abstract
In this research MPA capped CdTe nanocrystals with sizes around 2.7-3.5 nm were grown in aqueous solution. The process was performed through the reaction of NaHTe with MPA and CdCl2 solution in high temperature. The synthesis was carried out in two different states of standard and modified forms. In the modified synthesis, the hydrazine hydrate material was added to the MPA plus CdCl2 solution before injection. The evolution of the nanocrystals size and PL quantum yield was monitored during the heating time for the growth. The results demonstrated that for the standard synthesis the growth rate was slow. The CdTe nanocrystals with high PL quantum yields were achieved in more than 10 h of...
Characterization of sputtered NiTi shape memory alloy thin films
, Article Scientia Iranica ; Volume 16, Issue 3 B , 2009 , Pages 248-252 ; 10263098 (ISSN) ; Naderi, M ; Zare Bidaki, H ; Sadrnezhaad, Kh ; Sharif University of Technology
2009
Abstract
During recent years, many investigations have been carried out to determine how to select different materials for the making of Micro Electro Mechanical Systems (MEMS) and bio-MEMS. The NiTi shape memory alloy thin film has been much regarded as a promising candidate for MEMS due. to its unique shape memory effect and high energy output. In this research, NiTi thin film was fabricated using a sputtering technique from separate elemental Ni and Ti targets. The characterizations of the deposited films were, investigated using different analysis techniques, such as Field Emission SEM, DSC, XR.D, electrical resistivity measurement and nanoindentation. © Sharif University of Technology, June 2009...
Kinetic and Equilibrium Modeling of The Gas Adsorption on Adsorbent by Multilayer and Monolayer Adsorption Mechanism
, M.Sc. Thesis Sharif University of Technology ; Ghotbi, Cyrus (Supervisor) ; Jafari Behbahani, Taraneh (Supervisor)
Abstract
gas adsorption in porous solids and adsorbent,is the important cases in gas processing industries. Including the removal of compounds such as carbon dioxide, hydrogen sulfide and mercaptans from sour gas in natural gas sweetening industry is of great importance.Also in solving the greenhouse phenomena extraction of gases such as methane and carbon dioxide of important environmental issues.To understand and predict the behavior of the absorption capacity of various adsorbents and thus the possibility of absorption systems, a mathematical model is needed.Library resources available in order to determine the kinetics and thermodynamic processes of gas adsorption on solid absorbents use...
Economic Consequences of SEC Regulation for Iran-related Disclosure
, M.Sc. Thesis Sharif University of Technology ; Fatemi Ardestani, Farshad (Supervisor) ; Rastad, Mahdi (Supervisor)
Abstract
We examine the economic implications of the SEC disclosure rules for companies doing business with Iran on their riskiness of debt. We exploit Section 219 of the Iran Threat Reduction and Syria Human Rights Act (ITRA), which requires companies listed on U.S exchanges to disclose their activities and transactions with Iranian institutions. We analyze the impact of the first ITRA disclosure on the cost of capital for both American and foreign companies listed on the US exchanges. Using a difference-in-difference approach, we document a negative impact of ITRA disclosures on loan spread and credit rating of foreign companies. Further, using textual analysis, we identify the elements in the...
Existence of Arithmetic Progressions in Subsets of Natural Numbers
, M.Sc. Thesis Sharif University of Technology ; Rastegar, Arash (Supervisor) ; Hatami Varzaneh, Omid (Supervisor)
Abstract
Szemeredi's theorem is one of the significant theorems in additive combinatorics which was started by Van Der Waerden's theorem in 1927. Erdos and Turan conjectured generalized versions of Van Der Waerden's theorem in several ways included Szemeredi's theorem. In 1975 Szemeredi proved the conjecture using complicated combinatorial methods. In 1977 H. Furstenberg proved Szemeredi's theorem via the Ergodic theory approach which led to prove polynomial Szemeredi's theorem and multi-dimensional Szemeredi's theorem. The Ergodic approach is the only known approach so far to these generalizations of this theorem which is named Ergodic Ramsey theory and led to some other problems in Ergodic theory...
Introducing a Simulation-Based Model to Improve the Design and Layout of Workstations Inside Airport Terminals in Iran
, M.Sc. Thesis Sharif University of Technology ; Alvanchi, Amin (Supervisor)
Abstract
The airport terminal is difficult to plan and design due to the different components and the intricate complexity of its parts. At the airport terminal, we face a queue system which simulation is always a good way to analyze. In addition, computer simulation using modern softwares with the capability to model different types of systems, including the airport terminal, while being less realistic than analytical models, is less costly than operational Exercise.In this study, a supportive approach for better and specific management of Iranian airport terminal buildings with discrete-event simulation is proposed, considering the need for managing the airport terminals building in the country and...
, M.Sc. Thesis Sharif University of Technology ; Alvanchi, Amin (Supervisor)
Abstract
Limited water resources in Iran have made dams an important part of the country’s infrastructure. As a result of the large number of in-progress and expected dam projects in the country, consideration of sustainability factors during planning, construction and operation phases of dam projects can create significant economical, social and environmental impacts in the long term. To come up with an inclusive sustainable development, new sustainability assessment approaches seek for sustainable development at the entire project’s life-cycle; they are looking for sustainable development at all design, construction, operation, maintenance and even demolition phases. In this research we have...
The Insider Threat: Analyzing and Modeling
, M.Sc. Thesis Sharif University of Technology ; Hendesi, Faramarz (Supervisor)
Abstract
Nowadays, most of businesses are becoming computer-based. This trend causes the organizations to become more vulnerable to internal and external threats. Internal threats are done through insiders. Insiders unlike outsiders have capabilities which aid them to easily carry out their illicit activities. Unfortunately, most of research in computer security has focused on the outsider threats, whereas the most damaging is the result of insiders’ illicit activities.This dissertation addresses three primary necessities of the research in the area of insider threat: a consistent definition of insider threat, a classification of types of insider threats, and a classification of vulnerabilities which...
Design of a Plantwide Decentrlized Structure Controller for the Tennessee Eastman Challenge Problem
, M.Sc. Thesis Sharif University of Technology ; Nobakhti, Amin (Supervisor)
Abstract
This project focuses on the Tennessee East-man challange problem(TEP) and the impact of setpoint changes and controller tunning on plant performance and profitability. TE has four major units. it is an unstable system due to the reaction within the reactor and a recycle streamcausing snow ball effect. As a result the control of this system is not easy. The study has been conducted along two main directions. First, selecting the optimal values for the setpoints and applying them in the simulation. secondly, try to find better parameter for controller in simulation. Simulation is based on working of Ricker. In TEP like the other multivariable systems, it is ameanable to use a centralized...
Convex Methods for the Design of Low Order Dynamic Pre-Compensators
, M.Sc. Thesis Sharif University of Technology ; Nobakhti, Amin (Supervisor)
Abstract
Decentralized control is a typical method for the design of industrial MIMO control systems. However, in most multivariable systems, the existence of large interactions limit the achievable performance of such controllers. In the Nyquist Array design method proposed by Rosenbrock, the system interactions can be reduced using a precompensator, such that a decentralized controller may be used with acceptable performance. A well designed pre-compensator will effectively decouple the system and the multivariable systems may be considered as a set of SISO systems. It is therefore obvious that the key element in the Nyquist Array design method is the design of the pre-compensator. There are two...
Integrity Analysis in the Time-Delay Systems
, M.Sc. Thesis Sharif University of Technology ; Nobakhti, Amin (Supervisor)
Abstract
Integrity of closed-loop systems with integral action control is characterized by using a series of successively more difficult to obtain conditions: Integral Stabilizable (IS), Integral Controllable (IC), Integral Controllable with Integrity (ICI), and Decentralized Integral Controllability (DIC). The IS condition requires that for a Linear Time-Invariant (LTI) finitedimensional (FD) plant, G(s), one finds a stabilizing decentralized controller with integral action. For G(s) to be IC, in addition to being IS, one should be able to reduce the gain of
all control loops by the same factor from a finite value to (but not including) zero without introducing instabilities. ICI requires that...
all control loops by the same factor from a finite value to (but not including) zero without introducing instabilities. ICI requires that...
A Thesis Submitted in Partial Fulfillment of the Requirement for the Degree of Master of Science in Electrical Engineering
, M.Sc. Thesis Sharif University of Technology ; Nobakhti, Amin (Supervisor)
Abstract
Intraction in multi input multi output (MIMO) system makes control of these systems difficult.There are two ways to control such systems; Centralized and Decentralized control. One way in which a centralized controller is designed is using a precompensator. With application of the pre-compensator, the MIMO sytem is decoupled into several SISO systems and one can control these seperatly. Almost all previews methods for the design of pre-compensator assume that the model of the plant containsno uncertainties.In this thesis a new method is proposed which takes into account model uncertaintes in the design of the pre-compensator.The form of the uncertainties considred an interval-parametric
Conditions for Integrity of Multivariable Systems with Input Saturation
, M.Sc. Thesis Sharif University of Technology ; Nobakhti, Amin (Supervisor)
Abstract
Multivariable control systems as used in the industry usually contain integral action in order to improve tracking of the output with respect to step reference changes. These systems are usually subject to input saturation due to actuator or sensor nonlinearities. The aim of this work is find the conditions for the integrity concept of such multivariable system, e.g. IS, IC, ICI and DIC. First we develop the conditions on the controller gains necessary stabilize the systems and then show that these conditions can changes when one examines integrity conditions
Disturbance Reduction Servo Motor Controller Design and Implementation
, M.Sc. Thesis Sharif University of Technology ; Nobakhti, Amin (Supervisor)
Abstract
The servomechanisms have wide industrial application such as robotics, Computer Numerical Control (CNC) machines, automated manufacturing and solar tracking. Several methods have already been proposed for servo motor control that the most important of them are Proportional Integral Derivative (PID), H2/H--, intelligent based controllers, and model predictive control. Problem specifications and user requirements, will determine the appropriate approach in each case. The aim of this thesis is construction of a real-life camera stabilizer to be used in the motion picture industry. Effects of base movement on the performance should be decreased by choosing appropriate sensors and control...
Disturbance Diagnosis In Plant-wide Processes
,
M.Sc. Thesis
Sharif University of Technology
;
Nobakhti, Amin
(Supervisor)
Abstract
In continous chemical process, disturbances usually propagate along the process. This project describes a data-driven method for identifying the direction of propagation of disturbances using historical process data. The concept is the application of Transfer Entropy, a method based on the conditional probability density functions that measures directionality of variation. For demonstration purposes the transfer entropy method is used to isolate the root-cause of the disturbance in the Tennassee Eastman benchmark process
Optimization of Sparse Control Structures in Multivariable Systems
, Ph.D. Dissertation Sharif University of Technology ; Nobakhti, Amin (Supervisor)
Abstract
In this thesis, the optimal control structure selection and design of sparse multi-variable control systems is addressed. A fundamental challenge which frequently emerges in engineering, social, and economic sciences, is the optimal selection of a subset of elements, in order to maximally fulfil a design objective. In practice, it is required to solve this underlying selection problem in conjunction with a non-linear or non-convex optimization which is designed to ensure desired performance. The requirement to solve these two problems simultaneously is what makes it inherently difficult; one which has thus far eluded efforts to develop a systematic means of determining its solution. In spite...
Decentralized Integral Controller Design to Possess Integrity
, M.Sc. Thesis Sharif University of Technology ; Nobakhti, Amin (Supervisor)
Abstract
Design of fault tolerant controllers with a reliable and robust control structure that can accommodate sensor and actuator failure is a challenging problem. In the process control literature, the term “integrity” is used to characterize these properties for decentralized control systems. It refers to the ability to retain system stability when one or some of the control loops get in or out of service or when loop gains are detuned.Conditions pertaining to the integrity of the closed-loop system are described by a series of successively more difficult to attain criteria whose evaluation is only based on the process steady state gains. These are Integral stabilizibility (IS), Integral...
Developing a Sustainable Model for Bridge Maintenance in Big Organisations
, M.Sc. Thesis Sharif University of Technology ; Alvanchi, Amin (Supervisor)
Abstract
For increasing longevity of a structure, it is not enough to notice only to designing aspects. In operation phase of a construction, we can increase the level of service and longevity. Asset-based Organizations, in addition to design their new assets, should maintain them. Infrastructures, such as road, bridge, dam, and water network, are important because of social and economic aspects. So they need special attention. There are efficient models for infrastructure maintenance that consider infrastructure element information, such as condition rate, weight, dimensions, deterioration rate, and cost of maintenance as inputs and give planning for maintenance in future. This planning, involves a...
A Neural Network Based Model for Cost Estimation of Industrial Building at the Project's Definition phase
, M.Sc. Thesis Sharif University of Technology ; Alvanchi, Amin (Supervisor)
Abstract
Annually there are many small-scale industry projects implemented in Iran, most of which are financed by local financial institutes. The financing agreements between project owners and financial institutes are usually formed and finalized during the initiation phase and are based on feasibility studies done at the early stages; before project design and construction begin. However, in many cases actual costs of projects exceed the costs estimated in feasibility studies which have been approved by financial institutes. Limited financial resources in the country, from one side, and the lengthy process of increasing the project financing limit, from another side, cause delays in the project...
Optimization of Cooperative Wind Energy Utilization
, Ph.D. Dissertation Sharif University of Technology ; Nobakhti, Amin (Supervisor)
Abstract
Optimization-based wind farms control focusing on fatigue loads minimization represents a promising approach to establish a balanced tradeoff between power production in wind farms and lifetime extension of the wind turbines. This dissertation aims to develop a novel strategy to determine individual wind turbine power set-points in such a way that fatigue loads imposed on the units are minimized. The research considers main oscillation modes of the turbine structure and the determining forces to evaluate the amount of fatigues.Based on detailed modelling of wind farms which includes influences of wake effects on the mean wind speed and turbulence intensity, a novel approach is used to...