Sharif Digital Repository

In this research, the propane steam reforming (PSR) as a promising alternative route over a mesoporous NiO–MgO–SiO2 catalyst to produce syngas (SG) was undertaken. This catalyst was prepared using a co-precipitation method followed by hydrothermal treatment. The influence of such catalyst preparation factors as the hydrothermal time and temperature, pH and calcination temperature on the physicochemical characteristics of the prepared samples were examined. Next, these materials were characterized through the BET-BJH, XRD, TPR, and FTIR analyses. The thermal stability of this catalyst was tested through the TGA and DTA techniques. Furthermore, the deactivation of the calcined catalysts at... 

In this research, a series of NiO-xMgO-SiO2 catalysts with various MgO/SiO2 molar ratios were prepared via precipitation method followed by a hydrothermal treatment in the presence of PVP as surfactant. The synergic effect between MgO and SiO2 leading to the various characteristic and catalytic performance during propane steam reforming was investigated in detail. The results showed that 15 wt% NiO-0.5MgO–SiO2 catalyst possessed the highest catalytic activity (68.9% conversion for C3H8 at 550 °C) with a negligible amount of carbon formation after 20 h of reaction duration. This superior catalytic performance can be attributed to the enhanced basicity strength along with strong metal-support... 

In this study, 15 wt. % NiO-MgO-SiO2 catalysts modified by La2O3 promoter were prepared through a co-precipitation route and employed for syngas production via propane steam reforming. Various techniques including X-Ray diffraction, BET, TPR, CO2-TPD, CO-chemisorption, TPO, and Scanning electron microscopy were utilized to characterize the final samples. The results indicated that the incorporation of La2O3 enhanced the metal-support interaction providing less reducible Ni species. In comparison with the La-free catalyst, the promoted ones possessed higher metal dispersion and smaller Ni particles. Nonetheless, excessive amounts of La covering the active sites negatively decreased the Ni... 

In this research, a series of NiO–MgO–SiO2 catalyst samples with various nickel contents (5, 10, 15 and 20 wt %) were prepared by a co-precipitation method followed by a hydrothermal treatment and employed in propane steam reforming. The analyses revealed that the enhancement of the nickel content up to 15 wt % improved the propane conversion to 98.6% at 550 °C. Nonetheless, further increase in the nickel loading reduced the catalyst activity due to the formation of larger and more poorly dispersed active sites. Besides, 15 wt % nickel loading led to the high resistance against coke deposition with no detectable carbon on the catalyst surface. In addition, it was revealed that, the decrease... 

In this contribution, NiO-MgO-SiO2 catalyst was prepared and calcined at different temperatures of 500, 600, 700 and 800 °C. The resulting samples were characterized by BET-BJH, XRD, TPX, CO-chemisorption, EDS and SEM analyses. These were employed toward syngas production via propane dry reforming. The increment in the calcination temperature from 500 to 800 °C decreased the basicity of the catalysts. In addition, the active surface area and Ni dispersion were gradually declined by increasing the calcination temperature from 600 to 700 °C due to active metal sintering during the activation process. The calcined sample at 600 °C displayed the highest propane and CO2 conversions of 93% and 78%... 

In this contribution, NiO-MgO-SiO2 catalysts containing 3 wt. % of CeO2, La2O3, Y2O3, and Zr2O3 were examined for propane dry reforming at 550-750 °C. The samples were synthesized by a co-precipitation route, followed by a hydrothermal treatment, and characterized by BET, XRD and TPX analyses. The results indicated that the addition of promoters enhanced the metal-support interaction and basic characteristics, while the acidic nature of the promoted catalyst was changed in a different way. The highest propane conversion of 39.6% was observed over Ce-promoter sample, while the un-promoted catalyst possessed a value of 36.8% at 700 °C. Nevertheless, La and Y-promoted catalysts possessed a... 

Fibrinogen is one of the key proteins that participate in the protein corona composition of many types of nanoparticles (NPs), and its conformational changes are crucial for activation of immune systems. Recently, we demonstrated that the fibrinogen highly contributed in the protein corona composition at the surface of zeolite nanoparticles. Therefore, understanding the interaction of fibrinogen with zeolite nanoparticles in more details could shed light of their safe applications in medicine. Thus, we probed the molecular interactions between fibrinogen and zeolite nanoparticles using both experimental and simulation approaches. The results indicated that fibrinogen has a strong and... 

Comparison of the traditional linear heating method of TPD with an original stepwise heating scheme was reported for the first time. Stepwise heating TPD was carried out by keeping the temperature constant as soon as ammonia desorption signal rises until the signal returns to the baseline. More ammonia desorption peaks on a SAPO-34 catalyst were identified using TPD with stepwise heating. The effect of temperature ramp on desorption peak broadening in TPD curve was also addressed. The more distinct ammonia desorption peaks in stepwise TPD indicates that ammonia adsorbs in about five or six different ways on SAPO-34, and attribution of different adsorptions may be explained considering some... 

Most part of Iran is dominated by arid and semi-arid areas due to low annual rainfall. The need for production of fresh water from brackish water is considerably high, especially in dry regions. In this study 1 month daily-based experimental data from a solar still site has been reported. The technical and operational problems of this site which finally contributed to the total cease of the site are described. Then a detailed analysis is investigated on progress of a prototype which constructed in order to solve the site's problems. The results of 1 month of experimental data of the final design showed that the last prototype could be used to solve the current problems of the site. The... 

Hydrocracking is one of the most versatile petroleum refining processes for production of valuable products including gasoline, gas oil, and jet fuel. In this paper, a five-parameter continuous lumping model was used for kinetic modeling of hydrocracking of vacuum gas oil (VGO). The model parameters were estimated from industrial data obtained from a fixed bed reactor operating at an average temperature of 400°C and residence time of 0.3 h. Product distributions were obtained in terms of the weight fraction of various boiling point cuts. The model parameters were estimated using the Nelder-Mead optimization procedure and were correlated with temperature. Comparison of experimental and... 

Purpose - The purpose of this paper is to present an improved methodology for design of custom-made hip prostheses, through integration of advanced image processing, computer aided design (CAD) and additive manufacturing (AM) technologies. Design/methodology/approach - The proposed methodology for design of custom-made hip prostheses is based on an independent design criterion for each of the intra-medullary and extra-medullary portions of the prosthesis. The intra-medullar part of the prosthesis is designed using a more accurate and detailed description of the 3D geometry of the femoral intra-medullary cavity, including the septum calcar ridge, so that an improved fill and fit performance... 

In this letter, we propose a method for real-time high density impulse noise suppression from images. In our method, we first apply an impulse detector to identify the corrupted pixels and then employ an innovative weighted-average filter to restore them. The filter takes the nearest neighboring interpolated image as the initial image and computes the weights according to the relative positions of the corrupted and uncorrupted pixels. Experimental results show that the proposed method outperforms the best existing methods in both PSNR measure and visual quality and is quite suitable for real-time applications  

The disposal of used tires is a major environmental problem. With increasing interest on recovery of wastes, pyrolysis is considered as an alternative process for recovering some of the value in scrap tires. An accurate kinetic model is required to predict product yields during thermal or catalytic pyrolysis of scrap tires. Pyrolysis products contain a variety of hydrocarbons over a wide boiling range. A common approach for kinetic modeling of such complex systems is lumping where each lump is defined by a boiling point range. Available experimental data for thermal and catalytic pyrolysis of scrap tires from the literature were used to evaluate two types of lumping models; discrete and... 

Compared with flat linear structures, tubular linear machines do not face edge effects, making their performance better than their flat counterparts. In this article, a novel linear variable-reluctance resolver with tubular configuration is proposed. To optimize the design of an electromagnetic structure, modeling methods are used. Thus, in this article, an analytical model for the proposed resolver is presented. This model is based on the magnetic equivalent circuit (MEC) method and is considerably less time-consuming than finite element analysis (FEA), yet provides accurate results. A conformal mapping is employed to compute the permeance of the air-gap. The proposed model is then utilized... 

In Brukner and Zeilinger's interpretation of quantum mechanics, information is introduced as the most fundamental notion and the finiteness of information is considered as an essential feature of quantum systems. They also define a new measure of information which is inherently different from the Shannon information and try to show that the latter is not useful in defining the information content in a quantum object. Here, we show that there are serious problems in their approach which make their efforts unsatisfactory. The finiteness of information does not explain how objective results appear in experiments and what an instantaneous change in the so-called information vector (or catalog of...