Sharif Digital Repository

This paper investigates the development of cellular structures created by the propagation of a detonation wave in a gaseous mixture. Two dimensional reactive Euler equations with an idealized one-step Arrhenius type reaction model are solved using the PPM scheme coupled with the exact Riemann solver. The numerical flow solver simulates the evolution process of regular cellular structures of a weakly unstable detonation wave. The cellular structures are generated by two-dimensional sinusoidal perturbations imposed on a ZND detonation wave. The initial sinusoidal perturbation wavelengths are predicted from linear stability analysis. The objective of these calculations is to examine the... 

This article is intended to highlight the effectiveness of longitudinal Glass Fiber Reinforced Polymer (GFRP) bars in combination with GFRP sheets on the flexural capacity of Reinforced Concrete (RC) columns. Seven half-scale RC columns including five strengthened and two control unstrengthened specimens were experimentally tested under axial and cyclic lateral loads. The strengthened columns with two different longitudinal GFRP bar ratios were tested under three different axial load levels. The flexural strength and ductility parameters of the specimens were calculated by obtaining their deformations and measuring the loads from load cells. The experimental results indicate significant... 

The use of Near-surface Mounted (NSM) FRP bars is an efficient strengthening technique to enhance the flexural strength of RC structures. This article is intended to analytically investigate the effectiveness of Glass Fiber Reinforced Polymer (GFRP) bars in combination with GFRP wraps on the flexural capacity of reinforced concrete (RC) columns with Fiber Element Modeling approach. The accuracy and reliability of the proposed fiber-based modeling method is demonstrated by numerical models on seven half-scale experimental RC reference columns under axial and cyclic lateral loads. These reference specimens are comprised of seven half-scale RC columns including two unstrengthened and five... 

Internet technology has influenced the banking systems because of its capability to enhance performance of financial operations. A major concern of Internet banking systems is the customers’ perception of security and trust. This study presents an experimental investigation on important factors influencing trust in e-payments systems in Iran. A set of potentially determinant factors of trust is developed and organized in three major groups: technical and transaction procedures, access to security guidelines, and usability. The direct effect of the factors on perceived trust, along with their indirect effect through perceived security, is evaluated in an empirical study. The data are... 

In this paper, we study theoretically the generation of high repetition rate short pulses using fiber optical parametric amplification. We show that the pulse shape and duration depend on the signal location relatively to the pump frequency. We demonstrate that in order to get the shortest pulse width, the signal must be located at one of the extremities of the gain spectrum associated with the pump peak power. We derive the analytical expression of the pulse shape in this case and compare it to the exponential gain regime case. Using numerical simulations, we also analyze the impact of walk-off and pump phase modulation that is required to suppress Stimulated Brillouin Scattering and derive... 

This paper reports a polarization controllable and angle-insensitive perfect metamaterial absorber (PMA). The proposed PMA consists of periodically arranged asymmetric omega-shaped resonators made of metallic copper. The absorptivity was analyzed considering the microwave C-band from 4 GHz to 8 GHz. The proposed PMA shows an absorption peak with almost 100% absorptivity at 6.2 GHz. Also, wideband negative index of refraction is observed. Further, the absorber is inspected for the different rotation angles of the top metasurface (omega-shaped ring) along the optical axis, and obliquity of incidence angle for both TE and TM polarized waves. Moreover, surface electric field and surface current... 

Recent research efforts were made to investigate botanical bactericides as an intervention tool for citrus canker. Five botanical extracts (Eruca vesicaria, Eucalyptus globulus, Trigonella foenum-graecum, Nigella sativa, and Citrullus colocynthis) were evaluated at three different concentrations (0.25%, 0.5%, and 0.75%) against Xanthomonas citri pv. citri under in vitro conditions. Among all treatments, two effective plant extracts, alone and in combinations, were assessed at three different time points (7 days, 14 days, 21 days) under greenhouse conditions. In vitro and greenhouse experiments were conducted under a Completely Randomized Design. Results showed that C. colocynthis expressed... 

In cloud computing, services play key roles. Services are well defined and autonomous components. Nowadays, the demand of using Fuzzy inference as a service is increasing in the domain of complex and critical systems. In such systems, along with the development of the software, the cost of detecting and fixing software defects increases. Therefore, using formal methods, which provide clear, concise, and mathematical interpretation of the system, is crucial for the design of these Fuzzy systems. To obtain this goal, we introduce the Fuzzy Inference Cloud Service (FICS) and propose a novel discipline for formal modeling of the FICS. The FICS provides the service of Fuzzy inference to the... 

The mixed nano-ferrites materials Cu0.6Zn0.4HoxFe2−xO4 (0.00 ≤ x ≤ 0.12) were prepared via the sol–gel auto combustion technique. The TGA curve established the annealing temperature (500 °C) for phase formation. The single exothermic peak on the DSC plot occurred at 341 °C temperature. XRD patterns of these nano ferrites verified single phase formation of the FCC cubic structure. The lattice constant a was increased from 8.4244 to 8.4419 Å and then its value decreased to 8.4319 Å. Crystallite size was found in the range of 7 to 16 nm. The surface morphology of the samples was observed from the scanning electron microscope (SEM) images. The grain size was found within the range of 90 nm to... 

The mixed nano-ferrites materials Cu0.6Zn0.4HoxFe2−xO4 (0.00 ≤ x ≤ 0.12) were prepared via the sol–gel auto combustion technique. The TGA curve established the annealing temperature (500 °C) for phase formation. The single exothermic peak on the DSC plot occurred at 341 °C temperature. XRD patterns of these nano ferrites verified single phase formation of the FCC cubic structure. The lattice constant a was increased from 8.4244 to 8.4419 Å and then its value decreased to 8.4319 Å. Crystallite size was found in the range of 7 to 16 nm. The surface morphology of the samples was observed from the scanning electron microscope (SEM) images. The grain size was found within the range of 90 nm to... 

In the study presented herein, a simple method for laboratory calcite cementation of a reconstituted gravelly sand was presented. This method was used to prepare cemented gravelly sand specimens, which have similar natural characteristics to alluvial deposit of the city of Tehran. The formation and distribution of calcite bonds, as well as the effectiveness of the presented calcite cementation method in increasing interparticle cohesion, as observed in weakly to moderately cemented soil in Tehran, were evaluated by means of chemical analysis, X-ray diffraction technique, and unconfined compressive strength tests. The cementation technique was used to prepare triaxial specimens with calcite... 

Machine-to-Machine (M2M) communication is an important type of communication in the Internet-of-Things (IoT). How to send data in these high-density communications using relay selection can help improve the performance of this type of communication in various applications. In addition, the possibility of simultaneous use of different Radio Frequency (RF) interfaces helps to use the spectrum more efficiently. In this work, we try to further use machine communication RF equipment and improve the average data rate of networks in some applications such as the IoT, which have their own bandwidth requirements. Therefore, we provide an optimization algorithm for relay selection as well as the... 

The development of new technologies has confronted the entire domain of science and industry with issues of big data's scalability as well as its integration with the purpose of forecasting analytics in its life cycle. In predictive analytics, the forecast of near-future and recent past - or in other words, the now-casting - is the continuous study of real-time events and constantly updated where it considers eventuality. So, it is necessary to consider the highly data-driven technologies and to use new methods of analysis, like machine learning and visualization tools, with the ability of interaction and connection to different data resources with varieties of data regarding the type of big... 

Norouzak oil seeds that are the source of bio-diesel (Norouzak) fuel grow mostly in Gonabad and Kashmar located in Khorasan, north east of Iran. Spray characteristics of Norouzak bio-diesel have been experimentally and theoretically studied in this work. Norouzak fuel is added to the conventional diesel fuel, and mixture formations of several blends have been investigated and compared with each other. Moreover, by varying ambient and injection conditions, behaviors of spray of different blends have been explored. Microscopic and macroscopic properties of spray such as Sauter Mean Diameter (SMD), Ohnesorge number, spray tip penetration, spray cone angle, spray projected area and volume have... 

Norouzak oil seeds that are the source of bio-diesel (Norouzak) fuel grow mostly in Gonabad and Kashmar located in Khorasan, north east of Iran. Spray characteristics of Norouzak bio-diesel have been experimentally and theoretically studied in this work. Norouzak fuel is added to the conventional diesel fuel, and mixture formations of several blends have been investigated and compared with each other. Moreover, by varying ambient and injection conditions, behaviors of spray of different blends have been explored. Microscopic and macroscopic properties of spray such as Sauter Mean Diameter (SMD), Ohnesorge number, spray tip penetration, spray cone angle, spray projected area and volume have... 

In the present work, the spray characteristics of bio-ethanol and its blends have been experimentally and theoretically investigated. To have a comprehensive study, the effects of ambient condition and injection pressure on the spray of different blends have been considered. Macroscopic and microscopic characteristics of spray such as tip penetration length, cone angle, projected area, volume, Sauter Mean Diameter (SMD), and Ohnesorge number are investigated precisely. Besides, air entrainment and atomization analyses have been carried out to improve mixture formation process. Using curve fitting and least squares method, theoretical correlations have been suggested in such a way to predict...