Loading...
Search for: bari--atefeh
0.078 seconds

    Selecting List Cost Route in SMS Networks

    , M.Sc. Thesis Sharif University of Technology Ghanat Bari, Mehrab (Author) ; Haji, Rasol (Supervisor)
    Abstract
    Introductions: The routing Problem in SMS networks, start from subscriber called origin and end to other subscriber called destination. SMSs passed throw the switches, relay and routers. When the traffic of a SMS network increase, a global optimization is required to reduce the charge that SMS center must be paid meanwhile maximize total flow and minimize delivery time.
    Methods: in this study after investigation in Short Message service, Routing Algorithms and letreture review, first we used our models for Telephone networks. The total model with Features and constrains was build. In order apply this model on Mobile networks, with using Latin Multy Plications Algorithms we develope a... 

    Dynamics of Protein-Embedded Vesicles in Simple Shear Flow

    , M.Sc. Thesis Sharif University of Technology Hoore, Masoud (Author) ; Jalali, Mir Abbas (Supervisor) ; Khoshnood, Atefeh (Co-Advisor)
    Abstract
    Studying the dynamics of vesicles in simple shear flow is the first step to decipher the dynamics of cells in flows or the motion of vesicle-based nanoparticles in vessels for drug delivery. The deformation of vesicle in shear flow changes the permeability of its membrane and may lead to its rupture, both of which correlate with the transportation of vesicle cargos to their environment, especially important in drug delivery. The deformation of vesicles in shear flow not only depends on the physical properties of the whole system, such as temperature, but also on the mechanical properties of three media: vesicle membrane plus vesicle’s inner and outer fluid. The effect of the mechanical... 

    Effects of Graphene Nanopores and Temperature on DNA Sequencing Using Molecular Dynamics

    , M.Sc. Thesis Sharif University of Technology Majdi, Amin (Author) ; Meghdari, Ali (Supervisor) ; Khoshnood, Atefeh (Co-Advisor)
    Abstract
    Distinguishing the structure of DNA is of outmost importance in the medicine and agriculture industry nowadays. Various methods have been suggested so far; however, high costs, incorrect results, and time-taking process are among main defects of them. Scientists try to find new ways for recognizing DNA structure and system in order to overcome such problems. One of these new methods is absorbing and passing DNA through Nano-pores in an electrolyte solution under the influence of an electrical field. The basis of this method is the ionized currents which occur due to the passing of DNA through Nano-pores. Because each DNA base pairs can form a barrier corresponding to a unique measured value,... 

    Oxidation of Sulfides and Olefins in the Presence of Nanocluster Polyoxotungstate–intercalated Layered Double Hydroxide Nanoparticles as a Catalyst

    , M.Sc. Thesis Sharif University of Technology Qoreishi Kavardi, Atefeh Sadat (Author) ; Bagherzadeh, Mojtaba (Supervisor)
    Abstract
    In this study, polyoxometalate (POM) intercalated in the layered double hydroxide (LDH) was synthesized by a selective ion-exchange method. For this purpose, the nanocluster [VW12O40]3- was immobilized on the Mg2+/A13+/Cl–LDH support. The heterogeneous catalyst was characterized by FT-IR, XRD, SEM and analysis of ICP. The LDH-POM was applied as a catalyst in efficient oxidation of sulfides to sulfoxides using UHP as oxidant and CH3OH/ CH¬2¬Cl¬2 ¬as a solvent at room temperature, as well as epoxidation of olefins using TBHP as an oxidants and C¬2H4Cl2 as a solvent in 84°C. This catalyst showed excellent catalytic activities for a substrate/catalyst ratio (200:1). For example, this catalytic... 

    Long Period Variable Stars in the Local Group Galaxies

    , M.Sc. Thesis Sharif University of Technology Hashemi, Azim (Author) ; Rahvar, Sohrab (Supervisor) ; Javadi, Atefeh (Co-Supervisor)
    Abstract
    In this thesis, the star formation history and evolution of IC 1613 dwarf galaxy and NGC 5128 giant elliptical galaxy has been studied. About IC 1613, our result shows that the star formation history of the galaxy is roughly constant in 5 Gyr ago and this support that the galaxy had been isolated at least in 5 Gyr ago. About NGC 5128, we can see that the star formation rate has suddenly increased in 700 Myr and 3.5 Gyr ago. This results in very good agreement with literature support that the galaxy has experienced some mergers with smaller gas rich galaxies  

    Experimental and Numerical Evaluation of Lightweight Steel Frame Equipped with OSB Panel Subjected to Gravity and Cyclic Loadings

    , M.Sc. Thesis Sharif University of Technology Bari, Atefeh (Author) ; Rahimzadeh Rofooei, Fayaz (Supervisor)
    Abstract
    The objective of this paper is to explore and characterize the effect of practical construction details on the dynamic and gravity load carrying capacity of cold-formed steel framed shear walls sheathed with Oriented Strand Board (OSB). In order to improve the lateral stiffness and shear strength of cold-formed steel (CFS) framing wall, an innovative CFS wall equipped with OSB and gypsum boards are experimentally studied in this thesis. For this purpose, six K-braced frames with and without sheathing boards are investigated experimentally under lateral cyclic loading and gravity forces. The failure modes, loaddisplacement responses, and energy absorption capacity of the specimens were... 

    Study and Comparison the Incidence of Dutch Disease in Iranian Economy in Two Periods of Oil Shock

    , M.Sc. Thesis Sharif University of Technology Momeni, Atefeh Sadat (Author) ; nili, Masoud (Supervisor) ; Madanizadeh, Ali (Supervisor)
    Abstract
    This paper studies and compares the effect of "Dutch disease" in Iranian economy in two periods of rising oil price (1973-1978) and (2004-2010). The study presents a DSGE model to analysis the behavior of economic variable in both periods and to address this question that whether or not policy maker has learning behavior. The model consists of households, final goods producers who divided in tradable goods and non-tradable goods sector and the government. I use calibration methods to estimate models parameters.Comparison of simulated results and the actual macroeconomic variables in Iran during 1338-1390 indicates that, first of all Dutch disease effect occur in both periods of oil shock so... 

    The Effect of Hydrophobic Mismatch and Rigidity of Protein on the Cluster Formation of Transmembrane Proteins in Biomembranes

    , M.Sc. Thesis Sharif University of Technology Jafarinia, Hamid Reza (Author) ; Ahmadiyan, Mohammad Taghi (Supervisor) ; Jalali, Mir Abbas (Co-Advisor) ; Khoshnood, Atefeh (Co-Advisor)
    Abstract
    Membrane proteins aggregation is a very important biological phenomenon in a variety of cell functions. It has been suggested that aggregation behavior of membrane proteins is influenced by the shape of the hydrophobic domain of the proteins, proteins hydrophobic mismatch and bilayer curvature. However, in this study by means of coarse grained membrane simulations it has been found that in thermal equilibrium, protein-protein interactions also depend on protein rigidity and structural strength. Based on simulation results, we have observed stable large clusters even in the absence of hydrophobic mismatch between lipids and proteins. Interestingly, our results also indicate that proteins with... 

    QCT: A measuring tool dedicated to the estimation of image parameters for quality assurance/quality control programs of ct scanners

    , Article 15th IEEE International Symposium on Medical Measurements and Applications, MeMeA 2020, 1 June 2020 through 3 June 2020 ; July , 2020 Khodajou Chokami, H ; Hosseini, S. A ; Ghorbanzadeh, M ; Mohammadi, M ; IEEE; IEEE Instrumentation and Measurement Society; IEEE Sensors Council Italy Chapter; Politecnica di Bari; Politecnico di Torino; Societa Italiana di Analisi del Movimento in Clinica ; Sharif University of Technology
    Institute of Electrical and Electronics Engineers Inc  2020
    Abstract
    Computed Tomography (CT) is one of the most widely used screening and diagnostic tools in medical imaging centers. Considering IAEA HUMAN HEALTH SERIES No. 19 and the American College of Radiology (ACR) Accreditation Program, quality assurance (QA) and quality control (QC) are mandatory programs to periodically monitor the system condition to promote the effective utilization of ionization radiation for a diagnostic outcome through obtaining and retaining appropriate image quality and reduction of patient dose. Computational phantoms (CPs) are the key tool to monitor system condition. The commercial QC phantoms are expensive products and are not flexible enough for user demands. In this... 

    Robust decentralized control for islanded operation of two radially connected DG systems

    , Article 2010 IEEE International Symposium on Industrial Electronics, ISIE 2010, Bari, 4 July 2010 through 7 July 2010 ; July , 2010 , Pages 2272-2277 ; 9781424463916 (ISBN) Moradi, R ; Karimi, H ; Karimi Ghartemani, M ; The Institute of Electrical and Electronics Engineers (IEEE); IEEE Industrial Electronics Society (IES); IEEE Control Systems Society (CSS); Society of Instrument and Control Engineers (SICE-Japan); Politecnico di Bari ; Sharif University of Technology
    2010
    Abstract
    A decentralized servomechanism controller for islanded (autonomous) operation of radial connection of two distributed generation (DG) units is proposed in this paper. Each DG unit utilizes a voltage-sourced converter (VSC) for interface to its dedicated load. The DG units and the loads are to operate in the islanded mode of operation. Each DG unit regulates the voltage of its dedicated load in a decentralized manner. In this paper, it is first shown that the radial connection of two DG units in the islanded mode constitutes an interconnected composite system consisting of two subsystems. Moreover, the paper shows that the overall islanded system can be controlled by the local controllers,... 

    Mamsim: A computational software platform for measuring and optimizing imaging and dosimetry parameters in screen-film and digital mammography systems

    , Article 15th IEEE International Symposium on Medical Measurements and Applications, MeMeA 2020, 1 June 2020 through 3 June 2020 ; July , 2020 Khodajou Chokami, H ; Vahdat, B. V ; Ebrahimi Khankook, A ; Noorvand, M ; IEEE; IEEE Instrumentation and Measurement Society; IEEE Sensors Council Italy Chapter; Politecnica di Bari; Politecnico di Torino; Societa Italiana di Analisi del Movimento in Clinica ; Sharif University of Technology
    Institute of Electrical and Electronics Engineers Inc  2020
    Abstract
    The aim of this work is to develop a mammography Monte Carlo MCNP-FBSM based simulation platform called 'MamSim' that is able to model the detailed geometry and physics of commercial screen-film and digital mammography units. This simulation platform is designed to enable the virtual assessment and optimization of mammography protocols and parameters for obtaining the desired image quality while diminishing radiation dose to the patient in both contact and magnification modes. A graphical user interface generates MCNP-FBSM input files for simulating mammography units under various geometries and imaging protocols. We considered the full simulation of all components of mammography procedure... 

    Personalized computational human phantoms via a hybrid model-based deep learning method

    , Article 15th IEEE International Symposium on Medical Measurements and Applications, MeMeA 2020, 1 June 2020 through 3 June 2020 ; July , 2020 Khodajou Chokami, H ; Bitarafan, A ; Dylov, D. V ; Soleymani Baghshah, M ; Hosseini, S. A ; IEEE; IEEE Instrumentation and Measurement Society; IEEE Sensors Council Italy Chapter; Politecnica di Bari; Politecnico di Torino; Societa Italiana di Analisi del Movimento in Clinica ; Sharif University of Technology
    Institute of Electrical and Electronics Engineers Inc  2020
    Abstract
    Computed tomography (CT) simulators are versatile tools for scanning protocol evaluation, optimization of geometrical design parameters, assessment of image reconstruction algorithms, and evaluation of the impact of future innovations attempting to improve the performance of CT scanners. Computational human phantoms (CHPs) play a key role in simulators for the radiation dosimetry and assessment of image quality tasks in the medical x-ray systems. Since the construction of patient-specific CHPs can be both difficult and time-consuming, nominal standard/reference CHPs have been established, yielding significant discrepancies in the special design and optimization demands of patient dose and...