Sharif Digital Repository

A basic highway design problem is to find the most economical alignment connecting two given end points based on topography, soil conditions, socioeconomic factors and environmental impacts, while satisfying a set of design and operational constraints. The cost function complexity and numerous limitations such as highway design criteria have made this problem a NP-hard one. In this study, a swarm based searching algorithm has been applied to a three dimensional highway alignment optimization model. The spatial data has been exploited from a GIS databases using a heuristic swift approach. In addition, the majority of cost items that depend on highway design have been extended in a practical... 

As a robust and accurate classification of tumors is necessary for successful treatment of cancer, classification of DNA microarray data has been widely used in successful diagnosis of cancers and some other biological diseases. But the main challenge in classification of microarray data is the extreme asymmetry between the dimensionality of features (usually thousands or even tens of thousands of genes) and that of tissues (few hundreds of samples). Because of such curse of dimensionality, a class prediction model could be very successful in classifying one type of dataset but may fail to perform well in some other ones. Overfitting is another problem that prevents conventional learning... 

In this research, portfolio risk management methodology has been developed based on the portfolio management standard. This document is applicable as a template and standard for the organizations managing their projects in a portfolio structure since the methodology is based on portfolio standards and risk management, and it is being benefitted from their synergy. The most essential goal of portfolio management is to protect the organization against damages and to prepare it for responding to risks. In order to realize the goal of portfolio risk management, a well-developed and operational framework shall be provided. Therefore, the purpose of this study is to express the details of the... 

Roll bonding process is commonly used for the production of multilayer sheets. In the present study, using the roll bonding process, two layer sheets of copper - stainless steel were produced. In this case bonding strength was measured by peeling test at different statges and the quality of bonding was evaluated by SEM and Stereo Electron Microscope. The cross-sections of the bonding of rolled and annealed samples was investigated by optical microscopy. Also using EDAX analysis and EDS, the chemical composition of formed transition layer and the size of its interface at different temperature are measured respectively and the change in mechanical properties was investigated by tensile test... 

In the present thesis, the issue of locating end devices in the LoRa IoT network is examined using the received signal strength (RSS) approach. Recent advancements in machine learning techniques have revolutionized the localization field, enabling researchers to achieve better performance in non-line-of-sight (NLOS) and multipath interference conditions compared to traditional methods such as RSS and time difference of arrival (TDOA). This research first aims to reduce the position estimation error by appropriately scaling the received signal strength values on the public Antwerp dataset and to obtain a trained model for real-time localization of end devices. After introducing an appropriate... 

Crude oil production could cause the thermodynamic equilibrium of the crude oil to be disturbed in the well column which results in asphaltene precipitation and deposition. The thickness of the deposited material grows over time until it completely blocks the well column.Due to the hard and insoluble nature of deposited asphaltene, the two main chemical and mechanical methods are found to be more effective. It should be noted that the actual organic sediments in the piping are not pure and consist of three components: asphaltene, resin and paraffin. Therefore, it is very important to know the composition of the deposited material before selecting the appropriate chemical solvent.The samples... 

Local scouring at the downstream of sluice gates in the erosive beds is one of the main concerns of hydraulic engineers because of the significant damage that it can cause to the hydraulic structures. It is important to control the local scour depth at downstream of hydraulic structures to ensure safety operation of these systems. Many researchers have conducted various studies to predict the maximum depth and diameter of scour hole and develop new methods in order to control this phenomenon. One way to overcome this problem is the use of apron, or non-erosive bed. In order to shorten the apron length or decrease the effect of the... 

Air enterance in to flowing water is something that is commonly seen in the water conveyance systems. The mixture of Air and water that flow together create a kind of flow that is called two phase flow. This kind of flow is often seen in culverts and water conveyance systems. There are different flow patterns in two phase flow. Considering pressure fluctuation, pressure drop and pressure recovery, slug flow pattern is the most complicated pattern among all.
Sometimes a singularity is used in a tunnel; one of the singularities that are frequently used in water conveyance system is expansion transition. In this study an experimental setup is used to model two phase slug flow, which passes... 

It is well known that arrays of antennas make it possible to steer the radiation pattern without steering a physical structure. For the past few decades this has been considered for many civil and military communication systems. Recently, ultra-short pulses are considered for high resolution radars and ultra-wideband communication systems. Systems with short pulses and large antenna arrays may benefit from high resolution in both temporal and spatial domains. But the implementation of the ultra-wideband feeding circuits for such antenna arrays is a hard job even with state of the art electronics. Optical technology has been applied, successfully, to a number of radio applications such as... 

Sharp crested weirs are one of the main and oldest means of measuring discharge in water conveyance systems. Many studies have been done on sharp rectangular weirs and have provided many relationships regarding the effect of geometric parameters and various factors on discharge coefficient of the weirs.In some places, due to existence of obstacles or barriers in the channel, it is impossible to create a symmetrical continuous weir some other cases,multiple or asymmetric weirs should be used, which is the main concept of this project.Since it seems unlikely that a purely mathematical model can review the impact of the multiplicity and asymmetry of these weirs without using empirical... 

High-power (108 – 109 W) RF pulses with a carrier frequency of C band and a duration of several oscillation periods can be produced through direct energy conversion of a travelling high-voltage pulse with the use of nonlinear elements.
Nonlinear transmission lines consist either of lumped nonlinear elements and provide spatial dispersion of excited oscillations or of elements uniformly distributed on a certain line segment. The first type of NLTL’s can be referred to NLTL’s with spatial dispersion. The second type of NLTL’s is ensemble of nonlinear oscillators with a characteristic natural frequency and temporal dispersion. In the first case, the duration of electromagnetic pulses is... 

During 1980s Additive Manufacturing technologies for the purpose of prototyping with fast and less expensive, under the name of Rapid Prototyping was invented. But nowadays under the vast progress made in this field, it possesses a notable place in different industries such as automobile manufacturing, aerospace, architecture, medicine and so on for part manufacturing. In all AM machines, the CAD model design part is manufactured by adding layered to each other. In this research, at first by explaining manufacturing process and current different technologies, the place of this manufacturing process in today and future industry, is analyzed. For discussing replacement of this method instead... 

One of the most important methods of controlling discharge in water industry which is widely used in irrigation, water distribution, waste-water engineering, drainage, flood control and other water related projects, is side weir. The hydraulic behavior of flow over side weir is spatially varied flow with decreasing discharge. Various investigators have related the weir discharge coefficient as a function of main channel upstream Froude number and the fraction of weir height to upstream depth . Performance of sharp crested side weirs with extended length (as labyrinth side weir with asymmetric geometry) has been studied in this thesis. The variables for this study are height of weir ,... 

If the size of the conventional telecommunication antennas -that are widely used in transmitting broadcasted radio and TV messages- is reduced by a nanometer size these antennas can be used at optical frequencies. Dimensions of these optical nanoantennas -that made of nanoparticles with highly permittivity- can be smaller than half of the wavelength. Based on this capability, optical nanoantennas have some important applications such as optical communication, photovoltaic devices, non-classical light, and optical sensing. After studying on optical nanoantennas and their features, in this project, we present distinctions between optical NAs and MW antennas and then investigate about different... 

The Deep Fading Effect is a destructive factor in communication systems, one of the solutions to eliminate it is the use of Diversity, and there are two types of indicators of Diversity, Spatial Diversity and Polarization Diversity. Spatial Diversity is a common method to reduce the Fading Effect while increasing the cost and increasing the volume of the communication station, which to optimize the cost and reduce the volume of the communication station, the Polarization Diversity Structure is added to the telecommunication system. To apply Spatial Diversity, several Antennas with different Polarizations are used, which The most common method in mobile telecommunication station systems is... 

Cloud computing has brought about many changes in the new business arena. These changes do not only include technological changes, but have penetrated the business models of many companies. For example, in recent years, many companies have migrated from their former systems to cloud computing for reasons such as easy and low-cost access to high-performance hardware and software systems, and to avoid maintenance and repair costs and security costs.Due to the economic conditions in recent years and the high cost of electronic items, the criterion of purchase price has become much more important than in the past among people when buying such goods. Now in the Iranian electronics market,... 

Wireless communication systems play a pivotal role in the daily lives of individuals. Given the escalating demand for higher data rates and enhanced reliability, there is an imperative need for cutting-edge communication technologies. Rigorous research is being conducted in these systems to refine and optimize antenna structures, aiming at augmenting performance, escalating data transmission rates, and mitigating interference. Microstrip antenna structures have garnered considerable attention due to their diminutive dimensions, adaptability to planar and non-planar surfaces, simplistic design, cost-effectiveness, and mechanical resilience. These antennas, featuring diverse patch shapes,...