Sharif Digital Repository

Sport video shot classification is a basic step in the sport video processing. For many purposes such as event detection and summarization, shot classification is needed for content filtering. In this paper, we present a new method for soccer video shot classification. At first, in-field and out-of-field frames are separated. In in-field frames three features based on number of connected components and shirt color percent in vertical and horizontal strips are extracted. The features are all new and showed excellent discrimination in the feature space. These features are given to SVM for classifying long, medium and close-up shots. One of the advantages of our method is that, close-ups can be... 

In the past, decision making within the energy sector, especially in Iran, was limited to economic analysis. Lately, multiple criteria decision making has gained great popularity. However, this is not enough to make a right decision by considering sustainability. This paper deals with designing an appropriate multiple criteria decision making method to address the multifaceted nature of such problems. This task is the second precondition to make a decision which meets the sustainability criterion. This is done by revealing new facts about quantitative and qualitative data and the degree of compensation between the criteria. Moreover, this paper illustrates the capability of different methods... 

In this paper, a confined infill panel previously experimented under out-of-plane loading is modeled and analyzed by the dynamic explicit method (DEM). This method is shown to have a good estimation of the experimental results, and is thus adopted to investigate the out-of-plane behavior of an infill model. Based on the analytical results, the stress distribution of an infill panel prior to and after cracking, and the effect of an arching mechanism on post-cracking behavior, is studied. A semi-empirical relationship is accordingly developed for predicting the transverse resistance of masonry infills due to one-way arching action, which accounts for the effects of the boundary frame... 

Free vibration response of a joined shell system including cylindrical and spherical shells is analyzed in this research. It is assumed that the system of joined shell is made from a functionally graded material (FGM). Properties of the shells are assumed to be graded through the thickness. Both shells are unified in thickness. To capture the effects of through-the-thickness shear deformations and rotary inertias, first-order shear deformation theory of shells is used. The Donnell type of kinematic assumptions is adopted to establish the general equations of motion and the associated boundary and continuity conditions with the aid of Hamilton’s principle. The resulting system of equations is... 

Free vibration response of a cylindrical shell closed with two hemispherical caps at the ends (hermit capsule) is analysed in this research. It is assumed that the system of joined shell is made from functionally graded materials (FGM). Properties of the shells are assumed to be graded through the thickness. Cylindrical and hemispherical shells are unified in thickness. To capture the effects of through-the-thickness shear deformations and rotary inertias, first order theory of shells is used. Donnell type of kinematic assumptions are adopted to establish the general equations of motion and the associated boundary and continuity conditions with the aid of Hamilton's principle. The resulting... 

Free vibration response of a cylindrical shell closed with two hemispherical caps at the ends (hermit capsule) is analysed in this research. It is assumed that the system of joined shell is made from functionally graded materials (FGM). Properties of the shells are assumed to be graded through the thickness. Cylindrical and hemispherical shells are unified in thickness. To capture the effects of through-the-thickness shear deformations and rotary inertias, first order theory of shells is used. Donnell type of kinematic assumptions are adopted to establish the general equations of motion and the associated boundary and continuity conditions with the aid of Hamilton's principle. The resulting... 

Particulate VC-reinforced high-manganese austenitic steel matrix composites with different vanadium and tungsten contents were synthesized by conventional alloying and casting route. Microstructural characterizations showed that the composites processed by in situ precipitation of the reinforcements were composed of V8C7 particulates distributed in an austenitic matrix. It was observed that addition of tungsten to austenite increases work-hardening rate of subsurface layer during pin-on disk wear test. The maximum abrasive wear resistance was achieved at tungsten content equal to 2 wt pct. However, excessive addition of tungsten promoted the formation of W 3C phase and reduced the abrasive... 

In this investigation, in-situ precipitation of vanadium carbides was employed to reinforce Fe-13Mn and Fe-13Mn-3W alloys by means of conventional melting and casting route. Microstructures were characterized by optical and scanning electron microscopy techniques.Mechanical properties of the materials were determined by hardness, impact toughness and tension tests. It was observed that tungsten improved the strength of the matrix and the reinforcements as well as tensile properties and work hardening rate of the VC-reinforced composite. Ball mill abrasion test was utilized to simulate impact-abrasion wear condition using two types of abrasive minerals. The results showed that the degree of... 

This study seeks a method for formulating directional strategy of wind turbine industry in Iran. To this end, by initially evaluating various economic viewpoints concerning the development of industries, the necessity of government intervention is recognized. By defining the concepts of national industry policy, firm technology strategy, and national technology strategy, the role of directional industry strategy is then made clear. Furthermore, the six assumptions of emphasis on formulating strategy (rather than on formulating policy), emphasis on formulating directional strategy, model's prescriptivism, emphasis on formulating the strategy at the level of industry, Iran's being a developing... 

In this paper, to set R&D priorities at sector level, a developed method is proposed which is combined of scenario planning and critical technologies method and then applied for prioritizing R&D issues of membrane technology in National Iranian Gas Company (NIGC). In the first phase (through 3 steps), scope of NIGC is mapped using national documents and viewpoints of experts and managers. This map includes main process of gas processing and gas conversions. Then strategic goals of gas industry including gas exports, conversions, injection and internal use, are developed. Also Strategic Technology Units (STUs) are identified and twenty distinct membrane technologies including technologies of... 

Using stochastic point source and finite fault modeling, the stochastic stress drop is estimated for 52 large shallow earthquakes listed in the 'Pacific Earthquake Engineering Research Center (PEER) Next Generation Attenuation of Ground Motions (NGA)' database. The Pseudo Spectral Acceleration (PSA) of 541 accelerograms, recorded at National Earthquake Hazards Reduction Program (NEHRP) C-class sites from 52 earthquakes are simulated and compared with the PSA listed in the PEER NGA database. The magnitude of the analyzed earthquakes ranged from M4:4 to M7:6. The stress drop is calibrated by trial and error and based on the analysis of residuals where the residual is defined as the log of the... 

Technology Identification involves developing a list of technologies which are, or may be, incorporated into products or processes. After reviewing Technology Assessment, Technology Strategy, Management of Technology and New Product Development in literature, four methods of Technology Identification are investigated: Value Chain of Technologies, Process-based Approach, Quality Function Deployment and Technology Mapping. A model facilitating decision making process is then proposed by which the most appropriate method to be employed is identified. The proposed model is examined in specific case of fuel cell technologies while preparing the Fuel cell Development Strategic Plan of Iran. 1... 

Tabriz has experienced several large destructive historical earthquakes in the past. Due to the absence of ground motion records in this area, a simulation of future events based on a regional seismicity information and ground motion model is necessary. Based on a maximum likelihood method, earthquake magnitude is estimated for a 10% probability of exceedance within 50 years (475-year return period) and its corresponding strong ground motions have been simulated using stochastic finite fault modeling. Using different stress parameters, suites of ground motions have been simulated for a return period of £75 years and their spectral accelerations have been compared with the corresponding... 

A novel, efficient, and very mild one-pot synthesis of methyl 2-[(Z)-4-aryl-5-morpholino-3-oxo-2,3-dihydrothiophen-2-ylidene]acetate derivatives under kinetic control has been developed. The title compounds were prepared by the reaction of thioacetomorpholides with dimethyl acetylenedicarboxylate (DMAD) in the presence of K2CO3 in a non-polar solvent with excellent yields. © 2005 Taylor & Francis  

A simple, rapid and sensitive method based on microextraction in packed syringe (MEPS), in combination with gas chromatography-mass spectrometry (GC-MS) was developed. Polyaniline (PANI) nanowires network was synthesized and used as sorbent of MEPS for the multiresidue determination of selected analytes from triazine, organochlrorine and organophosphorous pesticides in aqueous samples. The PANI nanowires network was prepared using soft template technique and its characterization was studied by scanning electron microscopy (SEM). The presence of micelles in this methodology showed to be an important parameter in shaping the growing polymer. Hexadecyltrimethylammonium bromide (HTAB) was used... 

The morphology of a quaternary blend containing a diglycidyl ether of bisphenol-A (DGEBA), a thermoplastic modifier (PMMA), a phase-separating curing agent (diaminodiphenylmethane, DDM), and a non-phase-separating curing agent (methylenebis(3-chloro-2,6-diethylaniline, MCDEA) was studied as a function of volume fraction of the thermoplastic modifier and fractional concentration of the curing agents in their mixture. It was found that using mixtures of curing agents a co-continuous morphology could be obtained at PMMA concentrations as low as 2.5 volume percent. Using FTIR spectroscopy it was proved that specific interactions are present between PMMA and individual amine curing agents. On the... 

In this study, high-vanadium austenitic manganese steel (HV-AMS) alloys and the standard Hadfield steel were investigated. The microstructure of these high-vanadium alloyed Hadfield steels was studied thoroughly using optical microscopy (OM), scanning electron microscopy (SEM) and X-ray diffraction (XRD) and was compared to the Hadfield steel. The hardness and unnotched Charpy impact strength of HV-AMS alloys and Hadfield steel were examined at ambient temperature in the as-cast and heat-treated conditions. A pin-on-disk wear test at linear speed of 10. m/min and a 55. N normal load was employed to evaluate the wear behavior of both steel samples. Microstructural results showed that varying... 

An improved and efficient method for the synthesis of 1- & 5-substituted 1Htetrazole derivatives was described in the presence of nano-ordered MCM-41-SO3H as an effective heterogeneous catalyst. This metal-free protocol, [2 + 3] cycloaddition of sodium azide to various nitriles or ethyl N-phenyl formimidate intermediate under mild reaction conditions, provides a wide range of 1H-tetrazoles in good to excellent yields. The catalyst was reused five times without significant loss of catalytic activity. © 2019 Sharif University of Technology. All rights reserved