Loading...
Search for:
baghdadi--s
0.107 seconds
Total 11647 records
Synthesis of TiO2/ZnO electrospun nanofibers coated-sewage sludge carbon for adsorption of Ni(II), Cu(II), and COD from aqueous solutions and industrial wastewaters
, Article Journal of Dispersion Science and Technology ; Volume 42, Issue 6 , January , 2020 , Pages 802-812 ; Maddah, A. S ; Mehrdadi, N ; Bidhendi, G. N ; Baghdadi, M ; Sharif University of Technology
Taylor and Francis Inc
2020
Abstract
The nanofibers prepared by electrospinning process have high potential for the removal of toxic matters from wastewaters. In the present study, the titanium dioxide and titanium dioxide/zinc oxide (TiO2/ZnO) nanofibers prepared by electrospinning technique were coated on the sewage sludge carbon (SSC) surface for adsorption of Ni(II), Cu(II), and COD from aqueous solutions and industrial wastewaters of Iran. The synthesized adsorbents were characterized using XRD, SEM and EDX analysis. The effect of adsorbent type, pH, adsorbent dosage, contact time and initial concentrations of Ni(II), Cu(II) and COD on the adsorption capacity of synthesized SSC/TiO2 and SSC/TiO2/ZnO nanofibrous adsorbents...
Synthesis of TiO2/ZnO electrospun nanofibers coated-sewage sludge carbon for adsorption of Ni(II), Cu(II), and COD from aqueous solutions and industrial wastewaters
, Article Journal of Dispersion Science and Technology ; Volume 42, Issue 6 , 2021 , Pages 802-812 ; 01932691 (ISSN) ; Maddah, A. S ; Mehrdadi, N ; Bidhendi, G. N ; Baghdadi, M ; Sharif University of Technology
Bellwether Publishing, Ltd
2021
Abstract
The nanofibers prepared by electrospinning process have high potential for the removal of toxic matters from wastewaters. In the present study, the titanium dioxide and titanium dioxide/zinc oxide (TiO2/ZnO) nanofibers prepared by electrospinning technique were coated on the sewage sludge carbon (SSC) surface for adsorption of Ni(II), Cu(II), and COD from aqueous solutions and industrial wastewaters of Iran. The synthesized adsorbents were characterized using XRD, SEM and EDX analysis. The effect of adsorbent type, pH, adsorbent dosage, contact time and initial concentrations of Ni(II), Cu(II) and COD on the adsorption capacity of synthesized SSC/TiO2 and SSC/TiO2/ZnO nanofibrous adsorbents...
Intelligent Diagnosis of Cardiovascular Disease using ECG Signals
, M.Sc. Thesis Sharif University of Technology ; Haj Sadeghi, Khosrow (Supervisor)
Abstract
Cardiovascular diseases (CVDs) have ranked first cause of deaths globally. In 2016, about 17.7 million people died from CVDs representing 31% of all world deaths. So, early intelligent detection of cardiovascular disease could help to save many lives in worldwide. There are several methods to analyze heart activity and to detect any abnormalities including Electrocardiogram, Stress test, Echocardiography, cardiac catheterization and coronary angiography.Among all methods, Electrocardiogram (ECG) is the most common and convenient type where it measures heart electrical activity and records it as a series of pulses. Analyzing these pulses would provide useful information about normal and...
Designing a Curriculum with an Emphasis on Education for the Optimal Application of BIM in the Construction Industry
, M.Sc. Thesis Sharif University of Technology ; Kashani, Hamed (Supervisor)
Abstract
The Architecture, Engineering, and Construction (AEC) industry worldwide has increasingly turned its attention to the application of Building Information Modeling (BIM) due to its numerous advantages. Educational institutions have been urged to integrate this technology into their curricula so that new graduates can acquire the necessary competencies and expertise to keep pace with industry developments and take full advantage of BIM. Building Information Modeling involves automated processes that significantly reduce discrepancies between planned and constructed models, save time and cost, prevent errors, and mitigate risks. The process of introducing this technology into universities has...
P 043 – Center of pressure progression and ground reaction forces are altered in cerebral palsy crouch gait
, Article Gait and Posture ; Volume 65 , 2018 , Pages 307-308 ; 09666362 (ISSN) ; Khandan, A ; Arab Baniasad, M ; Baghdadi, S ; Farahmand, F ; Zohoor, H ; Sharif University of Technology
Elsevier B.V
2018
O 027 - There are common patterns of muscle synergy in cerebral palsy crouch gait
, Article Gait and Posture ; Volume 65 , 2018 , Pages 55-56 ; 09666362 (ISSN) ; Khandan, A ; Baniasad, M. A ; Farahmand, F ; Baghdadi, S ; Vafaei, A ; Narimani, R ; Sharif University of Technology
Elsevier B.V
2018
Abstract
Background: Muscle synergy is the leading hypothesis on how the central nervous system coordinates limb functions. Cerebral palsy (CP) patients utilize fewer synergies, and are believed to have a simpler neuromuscular control. This study was undertaken to determine whether consistent muscle synergies are recruited during ambulation in cerebral palsy crouch gait and how the muscles contribute to such synergies. Methods: Ten ambulatory CP patients were recruited. All walked with crouch gait. sEMG data were collected from 14 lower limb muscles during gait analysis. Non-negative matrix factorization method was utilized to extract muscle synergies. Results and significance: A total of five...
Effect of travel speed on quality and welding efficiency of friction stir welded AZ31B magnesium alloy
, Article International Journal of Engineering and Technology(UAE) ; Volume 7, Issue 3 , January , 2018 , Pages 94-99 ; 2227524X (ISSN) ; Selamat, N. F. M ; Sajuri, Z ; Kokabi, A. H ; Sharif University of Technology
Science Publishing Corporation Inc
2018
Abstract
Weight reduction is one of the most concerning issues of automotive and aircraft industries in reducing fuel consumption. Magnesium (Mg) alloys are the lightest alloys which can be used in the structure due to low density and high strength to weight ratio. Developing a reliable joining process of magnesium alloys is required due to limited ductility and low workability at room temperature. Friction stir welding (FSW) is a solid-state welding process that can be performed to produce sound joints in magnesium alloys. Researchers have performed investigations on the effect of rotation and travel speeds in FSW of AZ31B magnesium alloy. However, there is lack of study on the FSW parameters, i.e....
P 134 – Absence of the patella has minimal effects on sagittal plane gait parameters
, Article Gait and Posture ; Volume 65 , 2018 , Pages 462-464 ; 09666362 (ISSN) ; Khandan, A ; Arab Baniasad, M ; Darbandi, H ; Vafaei, A. R ; Sharif University of Technology
Elsevier B.V
2018
Abstract
Patella is the latest addition to the animal's skeleton. It's role in normal walking has not been clearly defined. A 9-year-old girl with congenital absence of the patella was assessed using instrumented gait analysis. The results show a tendency for the limb for external rotation, which is more pronounced during swing. We suggest that the role of the patella is mainly to redirect the force of the quadriceps tendon medially. The classically described role, which is to increase the lever arm of the quadriceps tendon, was not confirmed in this study. © 2018 Elsevier B.V
Biodiesel production through transesterification of waste Pistacia- Terebinthus Oil by pharmaceutical waste as a heterogeneous catalyst: A sustainable solution for reducing external costs
, Article Heliyon ; Volume 10, Issue 14 , 2024 ; 24058440 (ISSN) ; Tahmasebi-Boldaji, R ; Ahmadian Baghbadarani, A ; Baghdadi, M ; Tavakoli, O ; Karbassi, A ; Avami, A ; Sharif University of Technology
2024
Abstract
A catalyst from the pharmaceutical waste of calcium and magnesium tablets was synthesized for biodiesel production from waste Pistacia-Terebinthus (PT) oil with the aim of creating added value and presenting a new approach for the management of such wastes. For this purpose, magnesium and calcium tablet wastes with a mass ratio of 70:30 (wt%) were calcined. The catalyst was investigated by several methods, such as thermal gravimetric analysis, X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, Brunauer-Emmett-Teller analysis, X-ray photoelectron spectroscopy, and CHNS/O elemental analysis. The high specific surface area of the catalyst...
Effect of intermetallic compounds on the fracture behavior of dissimilar friction stir welding joints of Mg and Al alloys
, Article International Journal of Minerals, Metallurgy and Materials ; Volume 26, Issue 10 , 2019 , Pages 1285-1298 ; 16744799 (ISSN) ; Sajuri, Z ; Selamat, N. F. M ; Omar, M. Z ; Miyashita, Y ; Kokabi, A. H ; Sharif University of Technology
University of Science and Technology Beijing
2019
Abstract
Joining Mg to Al is challenging because of the deterioration of mechanical properties caused by the formation of intermetallic compounds (IMCs) at the Mg/Al interface. This study aims to improve the mechanical properties of welded samples by preventing the fracture location at the Mg/Al interface. Friction stir welding was performed to join Mg to Al at different rotational and travel speeds. The micro structure of the welded samples showed the IMCs layers containing Al12Mg17 (γ) and Al3Mg2 (β) at the welding zone with a thickness (> 3.5
Cold-rolling strain hardening effect on the microstructure, serration-flow behaviour and dislocation density of friction stir welded AA5083
, Article Metals ; Volume 10, Issue 1 , 2020 ; Selamat, N. F. M ; Baghdadi, A. H ; Rajabi, A ; Omar, M. Z ; Kokabi, A. H ; Syarif, J ; Sharif University of Technology
MDPI AG
2020
Abstract
5083 aluminium (Al) alloy materials have extensive structural applications in transportation industries because of their high strength-to-weight ratio and corrosion resistance. However, under conventional fusion weldings, these materials are limited by their porosity, hot cracking, and distortion. Herein, friction stir welding (FSW) was performed to join a similar AA5083 alloy. A post-weld cold-rolling (PWCR) process was applied on joint samples at different thickness-reduction percentages (i.e., 10%, 20%, and 40%) to identify the effect of strain hardening on the microstructure and mechanical properties of the friction-stir-welded joint of AA5083 while considering the serration-flow...
The relationship between an EFL teacher's gender and students' willingness to communicate
, Article International Journal of Communication and Linguistic Studies ; Volume 10, Issue 4 , 2013 , Pages 17-29 ; 23277882 (ISSN) ; Pakzadian, S. S
Common Ground Publishing
2013
Abstract
Learning a foreign language encompasses a process of trial and error that can lead to the progression of the learner's interlanguage, meaning that the learners make use of their language knowledge that receives feedback and brings about progress through diagnosis of the problems and being corrected by the teacher. Therefore, there exists a need to analyze the underlying reasons causing the students to remain taciturn with a low willingness to communicate (WTC) during a language class. There has been much work done investigating the role of the learner's stable personal characteristics (traits) along with their situational changes at a specific time (states) that influence the student's...
Design and development of a miniaturized roto-translational motion platform for microaerial vehicle identification
, Article IEEE Aerospace and Electronic Systems Magazine ; Volume 39, Issue 12 , 2024 , Pages 24-35 ; 08858985 (ISSN) ; Pourtakdoust, S. H ; Mousavi, S. M. S
IEEE
2024
Abstract
Accurate system identification (SI) is essential for flight controller design of unmanned aerial vehicles and microaerial vehicles (MAVs). SI can be performed either in frequency or time domain using flight test data. As flight testing is often costly and may even lead to catastrophic events before some flight stability analysis is at hand, a low-cost 5 degree-of-freedom free motion platform (FMP) is designed and used for initial identification of MAVs via wind tunnel testing. A typical MAV is constructed as a test case and equipped with inertial sensors for testing and validation purposes. The proposed FMP allows for both rotational as well as translational motions that in turn provide for...
An automated simple algorithm for realistic pore network extraction from micro-tomography images
, Article Journal of Petroleum Science and Engineering ; Vol. 123, issue , 2014 , pp. 164-171 ; ISSN: 09204105 ; Jamshidi, S ; Salehi, S
2014
Abstract
Using 3-D scanned data to analyze and extract pore network plays a vital role in investigation of porous media's characteristics. In this paper, a new simple method is developed to detect pores and throats for analyzing the connectivity and permeability of the network. This automated method utilizes some of the common and well-known image processing functions which are widely accessible by researchers and this has led to an easy algorithm implementation. In this method, after polishing and quality control of images, using city-block distance function and watershed segmentation algorithm, pores and throats are detected and 3-D network is produced. This method can also be applied on 2-D images...
Discrimination of heart arrhythmias using novel features in heart rate phase space
, Article Computing in Cardiology ; Volume 40 , Sept , 2013 , Pages 1035-1038 ; 23258861 (ISSN); 9781479908844 (ISBN) ; Rezaei, S ; Salavatian, S
2013
Abstract
In this paper, we try to recognize and distinguish different groups of arrhythmia using novel features which have been obtained from the heart rate's phase space in recent years. For this purpose, we used Triangular Phase Space Mapping (TPSM) and Parabolic Phase Space Mapping (PPSM). For recognition, we used three groups of 15 subjects using the Physionet database (Arrhythmia, Congestive Heart Failure (CHF), and Atrial Fibrillation (AF)) with Normal Sinus Rhythm (NSR). The obtained features discriminate arrhythmia from NSR by p
An intelligent hybrid classification algorithm integrating fuzzy rule-based extraction and harmony search optimization: Medical diagnosis applications
, Article Knowledge-Based Systems ; Volume 220 , 2021 ; 09507051 (ISSN) ; Abdullah, S ; Akhavan Niaki, S. T ; Banihashemi, S ; Sharif University of Technology
Elsevier B.V
2021
Abstract
Uncertainty is a critical factor in medical datasets needed to be overcome for increasing diagnosis efficiency. This paper proposes an intelligent classification algorithm comprising a fuzzy rule-based approach, a harmony search (HS) algorithm, and a heuristic algorithm to classify medical datasets intelligently. Two fuzzy approaches, as well as orthogonal and triangular fuzzy sets, are first utilized to define the attributes of data. Then, an HS algorithm is integrated with a heuristic to generate fuzzy rules to select the best rules in the fuzzy rule-based systems. Moreover, to improve the performance of the proposed classification approach, a three-phase parameter tuning approach is...
Performance evaluation of shared hosting security methods
, Article Proc. of the 11th IEEE Int. Conference on Trust, Security and Privacy in Computing and Communications, TrustCom-2012 - 11th IEEE Int. Conference on Ubiquitous Computing and Communications ; 2012 , Pages 1310-1315 ; 9780769547459 (ISBN) ; Arshad, S ; Khoshkdahan, S ; Sharif University of Technology
2012
Abstract
Shared hosting is a kind of web hosting in which multiple websites reside on one webserver. It is cost-effective and makes the administration easier for websites' owners. However, shared hosting has some performance and security issues. In default shared hosting configuration, all websites' scripts are executed under the webserver's user account regardless of their owners. Therefore, a website is able to access other websites' resources. This security problem arises from lack of proper isolation between different websites hosted on the same webserver. In this survey, we have examined different methods for handling mentioned security issue. Also we evaluated the performance of mentioned...
The behaviour of an artificially cemented sandy gravel
, Article Geotechnical and Geological Engineering ; Volume 23, Issue 5 , 2005 , Pages 537-560 ; 09603182 (ISSN) ; Hosseini, S. M ; Toll, D. G ; Yasrebi, S. S ; Sharif University of Technology
2005
Abstract
The major section of the city of Tehran, Iran has been developed on cemented coarse-grained alluvium. This deposit consists of gravely sand to sandy gravel with some cobbles and is dominantly cemented by carbonaceous materials. In order to understand the mechanical behaviour of this soil, a series of undrained triaxial compression tests and unconfined compression tests were performed on uncemented and artificially cemented samples. Portland cement type I was used as the cementation agent for preparing artificially cemented samples. Uncemented samples and lightly cemented samples (1.5% cement) tested at high confining pressure showed contractive behaviour accompanied with positive excess pore...
An imperialist competitive algorithm approach for multi-objective optimization of direct coupling photovoltaic-electrolyzer systems
, Article International Journal of Hydrogen Energy ; Vol. 39, Issue 33 , 11 November , 2014 , pp. 18743-18757 ; ISSN: 03603199 ; Sayedin, F ; Khavas, S. S
2014
Abstract
In the context of sustainable clean hydrogen production pathways, photovoltaic-electrolyzer systems are one of the most promising alternatives for acquiring hydrogen from renewable energy sources. In fact, determining the optimal set of design and operating variables are always a key issue while coupling directly renewable electricity sources to PEM electrolyzers. Few previous studies have attempted to find the optimal size and operational condition of directly coupled photovoltaic-electrolyzer (PV/El) systems in order to maximize the hydrogen production or to minimize energy transfer loss between photovoltaic devices and the electrolyzer. Nevertheless an easy and efficient approach still...
Kalman filter based packet loss replacement in presence of additive noise
, Article 2012 25th IEEE Canadian Conference on Electrical and Computer Engineering: Vision for a Greener Future, CCECE 2012 ; 2012 ; 9781467314336 (ISBN) ; Ghorshi, S ; Tahaei, A
2012
Abstract
A major problem in real-time packet-based communication systems, is misrouted or delayed packets which results in degraded perceived voice quality. If packets are not available on time, the packets are considered as lost. The easiest solution in a network terminal receiver is to replace silence for the duration of lost speech segments. In a high quality communication system, to avoid degradation in speech quality due to packet loss, a suitable method or algorithm is needed to replace the missing segments of speech. In this paper, we introduce an adaptive filter for replacement of lost speech segment. In this method Kalman filter as a state-space based method will be used to predict the...