Loading...
Search for: awlipour-marghmaleki--milad
0.042 seconds

    Synthesis and Evaluation of Anion-Doped LDH/g-C3N4 Composite for Photocatalytic Degradation of Nitrophenol

    , M.Sc. Thesis Sharif University of Technology Awlipour Marghmaleki, Milad (Author) ; Ghotbi, Siroos (Supervisor) ; Khorasheh, Farhad (Supervisor) ; Asgharinezhad, Ali Akbar (Co-Supervisor)
    Abstract
    In this study, in order to photocatalytic degradation of 4-nitrophenol, which is one of the most hazardous organic pollutants in water, heterostructured photocatalyst NiFe-LDH/XB-doped g-C3N4 Nanosheets (NiFe-LDH/XBCNN) was investigated. A series of NiFe-LDH/XBCNN nanocomposites with different X content (100 mg, 200 mg, 300 mg and 400 mg) were synthesized by hydrothermal method. Time, pH, catalyst dose, initial pollutant concentration and H2O2 effect were studied. NiFe-LDH/300BCNN was an optimal nanocomposite that degraded 97.11% of 4-nitrophenol within 150 minutes under visible light and under optimal conditions (pH=11, 50 mg of catalyst, initial concentration of pollutant equal to 20... 

    Does the short-term boost of renewable energies guarantee their stable long-term growth? Assessment of the dynamics of feed-in tariff policy

    , Article Renewable Energy ; Volume 159 , October , 2020 , Pages 1252-1268 Milad Mousavian, H ; Hamed Shakouri, G ; Mashayekhi, A. N ; Kazemi, A ; Sharif University of Technology
    Elsevier Ltd  2020
    Abstract
    Feed-in tariff (FiT) is one of the most efficient ways that many governments throughout the world use to stimulate investment in renewable energies (REs) technology. For governments, financial management of the policy could be challenging as it needs a considerable amount of budget to support RE producers during the long remuneration period. In this paper, it has been illuminated that the early growth of REs capacity could be a temporary boost. And the socio-economic structure of the system will backlash the policy if some social mechanisms are not considered. Social tolerance for paying REs tax and potential investors’ trust emanated from budget-related mechanisms -which have rarely been... 

    Accurate prediction of kinematic viscosity of biodiesels and their blends with diesel fuels

    , Article JAOCS, Journal of the American Oil Chemists' Society ; Volume 97, Issue 10 , September , 2020 , Pages 1083-1094 Mehrizadeh, M ; Nikbin Fashkacheh, H ; Zand, N ; Najafi Marghmaleki, A ; Sharif University of Technology
    Wiley-Blackwell  2020
    Abstract
    Viscosity of mixtures of biodiesels (admixtures) and mixtures of biodiesel/diesel (blends) is a important parameter for determining their combustion behavior. There is no universal and general model for prediction of viscosity of these systems at different conditions. Hence, developing simple, accurate, and general models for prediction of viscosity of these systems is of great importance. In this work, three computer-based models named multilayer perceptron neural network (MLP-NN), radial basis function optimized by particle swarm optimization (PSO-RBF), and adaptive neuro fuzzy inference system optimized by hybrid approach (Hybrid-ANFIS) were developed for prediction of viscosity of blends... 

    Accurate prediction of viscosity of mixed oils

    , Article Petroleum Science and Technology ; Volume 39, Issue 9-10 , 2021 , Pages 351-361 ; 10916466 (ISSN) Khoshmardan, M. A ; Mehrizadeh, M ; Zand, N ; Najafi Marghmaleki, A ; Sharif University of Technology
    Bellwether Publishing, Ltd  2021
    Abstract
    Viscosity of mixed oil is an important parameter which is required in transportation and production processes of mixed crude oils. There is no universal and general model for prediction of viscosity of mixed oils at different conditions. Hence, developing simple, accurate and general models for prediction of mixed oil viscosity is of great importance. In this work three computer based models named MLP-NN, PSO-RBF and Hybrid-ANFIS were developed for prediction of viscosity of mixed oils. A number of 513 experimental data covering wide ranges of influencing parameters were utilized to develop the models. The accuracy of predictions of the developed models was examined by using different... 

    Plastic Deformation Analysis of High Carbon Steel Wire During Flat Rolling

    , M.Sc. Thesis Sharif University of Technology Saedi Marghmaleki, Ehsan (Author) ; Karimi Taheri, Ali (Supervisor) ; Kazeminezhad, Mohsen (Supervisor)
    Abstract
    In this research plastic deformation analysis of high carbon steel wire in one and more pass wire flat rolling process using the finite element method (FEM) has been investigated. The effects of changing rolling pass number, length of wire, mechanical property of roll, rolling speed and friction between roll and wire in calculated results have been studied and with the main process parameters are compared. Then, the damage and failure of wire and that’s steady state cross-section is examined by model of Johnson cook damage criterion (JC). The results suggested that reduction in height of the wire affects the rolling process parameters such as strain, damage and the cross-sectional geometry...