Sharif Digital Repository

Disposal of contaminated wastewater causes many serious problems especially when it gets mixed with the ground and seawater. It is, therefore, important to apply any remedial action to eradicate dangerous pollutants from the aqueous effluents and to avoid exposure of this wastewater to aquatic life. The research results discussed herein deal with the removal of Rhodamine B (RhB) and Congo Red (CR) dye from wastewater by using multi-walled carbon nanotubes (MWCNTs) as an adsorbent. Different factors like solid dosage, initial pH and concentration, time, and temperature were studied to understand the behavior and mechanism of adsorption. The maximum adsorption capacity in case of a single... 

In this research, Repetitive Group Sampling (RGS) plans are developed for the Weibull and generalized exponential distributions. To design the proposed plans, the median of a life-time is first used as the quality parameter. Then, a decision-making framework is developed, based on first and second type errors. Next, based on acceptable and limiting quality level criteria, tables are obtained to select the parameters of the proposed decision-making framework. The advantages of the proposed method over single sampling plans are discussed at the end  

In the study of chemical graph theory, an enormous number of research analyses have confirmed that the characteristics of chemicals have a nearby connection with their atomic structure. Topological indices were the critical tools for the analysis of these chemical substances to consider the essential topology of chemical structures. Topological descriptors are the significant numerical quantities or invariant in the fields of chemical graph theory. In this study, we have studied the crystal structure of copper oxide (Cu2O) chemical graph, and further, we have calculated the ev-degree-and ve-degree-based topological indices of copper oxide chemical graph. This kind of study may be useful for... 

Recent research efforts were made to investigate botanical bactericides as an intervention tool for citrus canker. Five botanical extracts (Eruca vesicaria, Eucalyptus globulus, Trigonella foenum-graecum, Nigella sativa, and Citrullus colocynthis) were evaluated at three different concentrations (0.25%, 0.5%, and 0.75%) against Xanthomonas citri pv. citri under in vitro conditions. Among all treatments, two effective plant extracts, alone and in combinations, were assessed at three different time points (7 days, 14 days, 21 days) under greenhouse conditions. In vitro and greenhouse experiments were conducted under a Completely Randomized Design. Results showed that C. colocynthis expressed... 

Sustainable development is significantly contributing the environmental degradation due to improvements in financial sector in One Belt and Road Initiative (BRI) region. Thus, the present research work constructs the sustainable development index for BRI. Afterwards, it unfolds the nexus of sustainable development-environmental degradation and also evaluates the role of financial development indicators in BRI economies. By utilizing the robust mean group, the present study quantifies the long-run marginal impacts of sustainable development, financial development indicators, energy consumption, and urban sprawl on environmental degradation, respectively. The marginal impacts infer an inverted... 

Betaine-based natural deep eutectic solvents (NADESs), a new class of green solvents, were immobilized into a porous polyvinylidene fluoride (PVDF) support and evaluated for the separation of CO2 from CO2/N2 and CO2/CH4 mixtures. Two types of NADESs were synthesized by mixing betaine (hydrogen bond acceptor-HBA) with malic acid and tartaric acid (hydrogen bond donors-HBD) respectively. FTIR and Raman spectroscopy were studied to confirm the synthesis and purity of the NADESs. The thermal strength of the NADESs was investigated using thermogravimetric analysis. The gas permeation results of the fabricated NADES-based-supported liquid membranes (NADES-SLMs) showed that the permeability of CO2... 

Over the years, the fruit industry has been entirely dependent on artificial ripening of fruits to satisfy the demands of the consumers. Both in nutrition and economics, fruits play a very critical role, and hence farmers and vendors need to keep the supply optimal. In developing countries, nearly 70–80% of fruits are artificially ripened using different agents, making chemical-induced ripening a health hazard and presenting a challenge for fruit sellers in maintaining safe and healthy practices. The review offers an insight into the benefits and risks associated with ripening agents while also stressing the need to explore newer, safer, and environmentally friendly ripening methods. This... 

For the 4th IUPAP International Conference of Women in Physics, we report on activities in science and engineering in Iran, and conditions for women in physics, in the three years since the 3rd IUPAP International Conference of Women in Physics was held in 2008. Iran has made prominent advancements and astonishing progress in laser technology, biotechnology, nanotechnology, genetics, computer software and hardware, and robotics. Iranian scientists have been very productive in several experimental fields, such as pharmaceutical, organic, and polymer chemistry. Conditions for women in physics have improved greatly in recent years. A project to improve the environment for learning physics, and... 

Water shortage is the main limitation for agricultural production in many parts of the world. Drought or unavailability of water may seriously limit plant growth as well as yield. A pot experiment was carried out to evaluate the effects of various irrigation strategies, i.e., Full (FI), deficit (DI) and partial root-zone drying (PRD) on physiological, biochemical and yield-related attributes of cotton crop. Irrigation treatments started 60 days after planting and lasted for 60 days. For FI and DI, 100% and 50% of evapotranspiration (ET) was replaced by irrigating the entire pot surface every 4–5 days. For PRD, root system was split into two equal halves and during each irrigation event, only... 

The lead is a heavy metal with hazardous impacts on environment and human life. Lead-free perovskite solar cells have attracted much attention in recent years, due to eco-friendly characteristics. Meanwhile, Pb-containing cells showed the highest efficiencies among the various types of cells. Hence, designing novel Pb-free solar cells with comparable or better performance than the Pb-containing ones is highly required. In this work, a lead-free methyl-ammonium-germanium-iodide (MAGeI3)-based perovskite solar cell with ITO/TiO2/MAGeI3/Spiro-OMeTAD/Ag multilayer nanostructure has been proposed and its main characteristics including open-circuit voltage (VOC) and power conversion efficiency (η)... 

Core/shell structure of ZnO nanowires coated with a monolayer of TiO 2 is investigated using Density Functional Theory (DFT). The electronic states of the semiconductor is calculated and compared before and after coating of the TiO2 monolayer on a ZnO [101 0] surface. The effect of TiO2 coating induce surface states changes and shifts the conduction and valence band edges to higher energies. Our results, in qualitative agreement with the experimental work of Matt Law et al. (J. Phys. Chem. B, 110, 22652), show an increase in open circuit voltage and a decrease in short circuit current in ZnO/TiO2 core shell dye sensitized solar cells. Regarding the semiconductor density of states (DOS), TiO2... 

Due to the important role of commitment and trust in the relationship marketing, the factors which can directly result in a committed relationship along with the factors which can influence the commitment through influencing trust, according to the model of commitment and trust by (Morgan & Hunt, 1994) have been introduced and their level of importance has been investigated here. The article uses fuzzy cognitive maps (FCMs) in the proposed model to find the most important paths leading to relationship commitment. The FCM analyzes the responses of a group of 30 people including general practitioners in dentistry, managers of dental departments in some of the public clinics and hospitals who... 

Conventionally, a film of TiO2 particles of 300 nm size is employed in Dye-sensitized solar cells (DSCs) as the back reflector film to enhance the light harvesting. Perfect reflectance of silver in visible and near infrared motivates to investigate its potential as the material for the light back reflector film in DSCs. In this study, light back reflector films consisting of 300 nm-sized silver particles, as well as vacuum evaporated silver flat film, were fabricated and compared to 300 nm-sized rutile-type TiO2 particulate reflector film to study their optical aspects. Conventional TiO2 rutile-type particulate film demonstrates slightly lower performance... 

Monolithic dye-sensitized solar cells are conventionally fabricated using carbon composite layer as the counter electrode. In the current research, the brittle carbon composite layer is replaced with a metal foil, aiming to decrease the device series resistance and using less catalyst material in counter electrode. This metallic structure has also an advantage of mechanical strength and decreases the fabrication complexity. The counter electrode is prepared by electrodepositing Cr film followed by electrodepositing Pt nanoparticles on a metal foil. As the porous spacer layer, different composite layers of SiO2, TiO2, and Al2O3 are investigated and the best results are obtained for TiO2... 

Nowadays, the need for green energy resources is being felt more than at any other time due to the critical level of carbon emission and its considerable effects on the environment. Hydrogen as a promising substitute for fossil fuels can be produced via water splitting reactions and be applied in a carbon-free cycle. As one of the main pillars of the 4th industrial revolution, additive manufacturing (AM) technologies are attractive trends toward fabrication of the electrolyzers and electrodes with high surface area and customized architecture in an automated, time-saving, and waste-reducing manner. This review is devoted to electrocatalytic water splitting reports in which additive... 

Microbial fuel cells (MFCs) have been a potential green energy source for a long time but one of the problems is that either the technology must be used on a large scale or special equipment have been necessary to keep the fuel cells running such as syringe pumps. Paper-based microbial fuel cells do not need to have a syringe pump to run and can run entirely by themselves when placed in contact with the fluids that are necessary for it to run. Paper-based microbial fuel cells are also more compact than traditional MFCs since the device doesn't need any external equipment to run. The goal of this paper is to develop a microbial fuel cell that does not require a syringe pump to function. This... 

This paper proposes a novel decentralized control approach for islanded direct-current (DC) microgrids (MGs) based on model predictive control (MPC) to regulate the distributed generation unit (DGU) output voltages, i.e. the voltages of the point of common coupling (PCC). A local controller is designed for each DGU, in the presence of uncertainties, disturbances, and unmodeled dynamics. First, a discrete-time state-space model of an MG is derived. Afterward, an MPC algorithm is designed to perform the PCC voltage control. The proposed MPC scheme ensures that the PCC voltages remain within an acceptable range. Several simulation studies have been conducted to illustrate the effectiveness of... 

Sophisticated surgeons are widely indicating the use of surgical robots in order to reject human error, increase precision, and speed. Among well-known robotic mechanisms, parallel robots are broadly more investigated regarding their special characters as higher acceleration, speed, and accuracy, and less weight. Specific surgical procedures confine, and restrict their workspace, while controlling and validating the robots are complicated regarding to their complex dynamic. To this end, in this paper, a 6-DOF robot, with rotary manipulators, is designed and controlled. Addressing nonlinearity of parallel robots, an innovative methodology is formulated to robustly penalize the error of... 

Sophisticated surgeons are widely indicating the use of surgical robots in order to reject human error, increase precision, and speed. Among well-known robotic mechanisms, parallel robots are broadly more investigated regarding their special characters as higher acceleration, speed, and accuracy, and less weight. Specific surgical procedures confine and restrict their workspace, while controlling and validating the robots are complicated based on their complex dynamic. To this end, in this paper, a 6-DOF robot, with linear manipulators, is designed and controlled. Addressing the inherent nonlinearity of the robot mechanism, an adaptive PID manipulator is employed and validated with nonlinear... 

Although so many advances have been proposed in the field of artificial intelligence and superconductivity, there are few reports on their combination. On the other hand, because of the nonlinear and multivariable characteristics of the superconductive elements and capabilities of neural networks in this field, it seems useful to apply the neural networks to model and control the superconductive phenomena or devices. In this paper, a new constructive neural network (CNN) trained by two different optimization algorithms; back-propagation and genetic algorithm, is proposed which models the behavior of the superconductive fault current limiters (SFCLs). Simulation results show that the proposed...