Sharif Digital Repository

Experimental and numerical methods were used to investigate the Magnus phenomena over a spinning projectile. The pressure force acting on the surface of a spinning projectile was measured for various cases by employing a relatively novel experimental technique. A set of miniature pressure sensors along with a data acquisition board, battery and storage memory were placed inside a spinning model and the surface pressure were obtained through a remotely controlled system. Circumferential pressures of the model for both rotational and static conditions were obtained at two different free stream Mach numbers of 0.4 and 0.8 and at different angles of attack. The results showed the ability of this... 

Cultural adaptation and validation of the Persian version of the Arthritis Measurement Scales 2-Short Form (AIMS2-SF). The translation and cultural adaptation of the original questionnaire was carried out in accordance with published guidelines. Three hundred and fifty consecutive Persian-speaking patients with rheumatoid arthritis (RA) were asked to complete the AIMS2-SF, the Short Form Health Survey (SF-36), and four visual analog scales (VAS) for pain, joint stiffness, and patient's and physician's global assessment to test convergent validity. In addition, 90 randomly selected patients were asked to complete the questionnaire 48 h later for the second time. Moderate to high correlation... 

Purpose.To translate and validate the Persian version of the Arthritis Measurement Scales 2-Short Form (AIMS2-SF) in patients with osteoarthritis (OA) of the knee. Method.The translation and cultural adaptation of the original questionnaire was carried out in accordance with published guidelines. One hundred and fourteen consecutive Persian-speaking patients with OA of the knee were participated in this study. The Short Form Health Survey (SF-36) and visual analogue scales (VAS) for pain and joint stiffness were used to test convergent validity of the Persian AIMS2-SF. In addition, 35 randomly selected patients were asked to complete the questionnaire 3 days later for the second time.... 

Background. The Arthritis Impact Measurement Scales 2 (AIMS2) has not been translated and validated for Persian-speaking patients with osteoarthritis of the knee. This was to provide a validated instrument to measure functional disability and health-related quality of life in patients with osteoarthritis of the knee in Iran. The aim of this study was to culturally adapt and validate the AIMS2 for Persian-speaking patients with osteoarthritis of the knee in Iran. Methods. A consecutive sample of patients with knee osteoarthritis were asked to complete the AIMS2, the Short Form Health Survey (SF-36) and four visual analog scales for pain, joint stiffness, patient's and physician's global... 

STUDY DESIGN.: Cross-sectional validation study to investigate psychometric properties of adapted Persian version of the Scoliosis Research Society-22r (SRS-22r) questionnaire. OBJECTIVES.: To translate the SRS-22r into Persian and to evaluate the internal consistency, reliability, and validity of the Persian SRS-22r. SUMMARY OF BACKGROUND DATA.: The SRS-22r has not been translated and validated for Persian-speaking patients with idiopathic scoliosis. This was to provide a validated instrument to measure health-related quality of life in patients with idiopathic scoliosis in Iran. METHODS.: The translation and cultural adaptation of the original questionnaire were carried out in accordance... 

STUDY DESIGN. Cultural translation and psychometric testing. OBJECTIVE. To translate and validate the Iranian versions of the Neck Disability Index (NDI-IR) and the Neck Pain and Disability Scale (NPDS-IR). SUMMARY OF BACKGROUND DATA. The widely used the NDI and the NPDS scales have not been translated and validated for Persian-speaking patients with neck pain. This was to provide a validated instrument to measure functional status in patients with neck pain in Iran. METHODS. The translation and cultural adaptation of the original questionnaires were carried out in accordance with the published guidelines. One hundred and eighty-five patients with neck pain were participated in the study.... 

Comparison of the traditional linear heating method of TPD with an original stepwise heating scheme was reported for the first time. Stepwise heating TPD was carried out by keeping the temperature constant as soon as ammonia desorption signal rises until the signal returns to the baseline. More ammonia desorption peaks on a SAPO-34 catalyst were identified using TPD with stepwise heating. The effect of temperature ramp on desorption peak broadening in TPD curve was also addressed. The more distinct ammonia desorption peaks in stepwise TPD indicates that ammonia adsorbs in about five or six different ways on SAPO-34, and attribution of different adsorptions may be explained considering some... 

Most part of Iran is dominated by arid and semi-arid areas due to low annual rainfall. The need for production of fresh water from brackish water is considerably high, especially in dry regions. In this study 1 month daily-based experimental data from a solar still site has been reported. The technical and operational problems of this site which finally contributed to the total cease of the site are described. Then a detailed analysis is investigated on progress of a prototype which constructed in order to solve the site's problems. The results of 1 month of experimental data of the final design showed that the last prototype could be used to solve the current problems of the site. The... 

Hydrocracking is one of the most versatile petroleum refining processes for production of valuable products including gasoline, gas oil, and jet fuel. In this paper, a five-parameter continuous lumping model was used for kinetic modeling of hydrocracking of vacuum gas oil (VGO). The model parameters were estimated from industrial data obtained from a fixed bed reactor operating at an average temperature of 400°C and residence time of 0.3 h. Product distributions were obtained in terms of the weight fraction of various boiling point cuts. The model parameters were estimated using the Nelder-Mead optimization procedure and were correlated with temperature. Comparison of experimental and... 

Purpose - The purpose of this paper is to present an improved methodology for design of custom-made hip prostheses, through integration of advanced image processing, computer aided design (CAD) and additive manufacturing (AM) technologies. Design/methodology/approach - The proposed methodology for design of custom-made hip prostheses is based on an independent design criterion for each of the intra-medullary and extra-medullary portions of the prosthesis. The intra-medullar part of the prosthesis is designed using a more accurate and detailed description of the 3D geometry of the femoral intra-medullary cavity, including the septum calcar ridge, so that an improved fill and fit performance... 

In this letter, we propose a method for real-time high density impulse noise suppression from images. In our method, we first apply an impulse detector to identify the corrupted pixels and then employ an innovative weighted-average filter to restore them. The filter takes the nearest neighboring interpolated image as the initial image and computes the weights according to the relative positions of the corrupted and uncorrupted pixels. Experimental results show that the proposed method outperforms the best existing methods in both PSNR measure and visual quality and is quite suitable for real-time applications  

The disposal of used tires is a major environmental problem. With increasing interest on recovery of wastes, pyrolysis is considered as an alternative process for recovering some of the value in scrap tires. An accurate kinetic model is required to predict product yields during thermal or catalytic pyrolysis of scrap tires. Pyrolysis products contain a variety of hydrocarbons over a wide boiling range. A common approach for kinetic modeling of such complex systems is lumping where each lump is defined by a boiling point range. Available experimental data for thermal and catalytic pyrolysis of scrap tires from the literature were used to evaluate two types of lumping models; discrete and... 

Compared with flat linear structures, tubular linear machines do not face edge effects, making their performance better than their flat counterparts. In this article, a novel linear variable-reluctance resolver with tubular configuration is proposed. To optimize the design of an electromagnetic structure, modeling methods are used. Thus, in this article, an analytical model for the proposed resolver is presented. This model is based on the magnetic equivalent circuit (MEC) method and is considerably less time-consuming than finite element analysis (FEA), yet provides accurate results. A conformal mapping is employed to compute the permeance of the air-gap. The proposed model is then utilized... 

In Brukner and Zeilinger's interpretation of quantum mechanics, information is introduced as the most fundamental notion and the finiteness of information is considered as an essential feature of quantum systems. They also define a new measure of information which is inherently different from the Shannon information and try to show that the latter is not useful in defining the information content in a quantum object. Here, we show that there are serious problems in their approach which make their efforts unsatisfactory. The finiteness of information does not explain how objective results appear in experiments and what an instantaneous change in the so-called information vector (or catalog of... 

Low silicon content SAPO-34 was successfully synthesized using the conventional hydrothermal crystallization in the static condition. Effects of different synthesis conditions including crystallization temperature and the silicon source were investigated through X-ray diffraction patterns. It was concluded that the silicon source had a significant effect on silicon incorporation into the alumino-phosphate building blocks in the course of crystallization. Using precipitated silica instead of silica sol resulted in the formation of impurities of alumino-phosphates phases whose crystalline structures collapse at the high temperature of calcination. For the low silicon SAPO-34 synthesis, the...