Sharif Digital Repository

Opinion formation is one of the major topics in social networks analysis and mining. A number of methods have been introduced for describing and simulating this phenomenon. In this thesis, we proposed a novel optimization framework based on an opinion formation model that used the Deffuant’s model with some changes in neighbors’ selection policy. Its efficiency was compared with a number of benchmark optimization methods including genetic algorithms, differential evolution and particle swarm optimization.The proposed model demonstrated better performance than the others.In the proposed, each person changes his opinion based on one of his neighbors who has the best performance in terms of the... 

Nowadays wireless technology is widespread all over the world and there is a competition among companies to provide the most secure and high range wireless networks for their customers. This thesis focuses on the security of wireless ad hoc networks. There are lots of different encryption algorithms for securing wireless ad hoc networks. Some of the most important are: WEP, TKIP, WPA, WPA2. All other encryption methods of wireless ad hoc networks are derived from these methods. This thesis focuses on WEP and WPA2. For both algorithms, a literature review is conducted, a new approach to cracking is suggested, and tested on real data, and the future works are mentioned. For WEP, which is an... 

Modeling and simulation of acid transport in fractured porous medium and the formation of wormholes are the main goals of this dissertation. Injection of acid in rocks is one of the enhanced oil recovery methods which is extensively used in industry. The flow of acid in a porous medium produces a highly permeable path which is called wormholes. The formation of these wormholes is dependent on parameters of rock, acid and injection properties. As a result, simulation and prediction of this phenomenon are very important for optimization. Some researches developed methods to model this phenomenon in porous media but few of them investigated discontinuities in a medium. This research uses... 

Graphene is a one layer atom thickness and zero energy gap so for using it in nano electronic and transistors baised on graphene it's energy gap should be opened.one of the methods for opening graphene band gap is creating nano scale boundaries or synthesize graphene nanoribbons. One of the new methods for graphene nanoribbon synthesize is longitudinal opening of carbon nanotube. In this thesis graphene nanoribbons synthesize with this method and analyze with AFM and Raman spectroscopy. Carbon nanotubes also have energy gap and IR absorption recently they used for living cell destruction. In this thesis we synthesize graphene nanoribbons and analyzing their optical absorption and use it for... 

TiO2 is known as a photocatalyst in near UV-Visible light region with better efficiency compared to other semiconductor photocatalysts. Many attempts have been done to increase the efficiency of this photocatalyst. also, application of 2D carbon nanostructures namely graphene for increasing the photocatalytic activity of TiO2 has shown positive results.
In this research, we first synthesized Graphene Oxide (GO) suspension by exfolation of graphite oxide suspension. then we fabricated TiO2 thin films on glass substrates by so-called sol-gel method. finally we fabricate Graphene Oxide/TiO2 nanowalls composite films as a photocatalyst in visible light. X-ray photoelectron spectroscopy... 

WO3 is known as a photocatalyst in the visible light region, but with lower efficiency compared to more interesting semiconductor photocatalysts such as TiO2 and ZnO. Many attempts have been done to increase the efficiency of this photocatalyst by incorporating metal and metal oxide nanoparticles or recently carbon nanotubes.On the other hand, application of graphene, as an unrolled carbon nanotube, for increasing the photocatalytic activity of TiO2 and ZnO has shown positive results. Furthermore, it was reported that such semiconductor photocatalysts (and very recently WO3) can photocatalytically reduce the chemically exfoliated graphene oxide sheets under UV-vis irradiation.
In this... 

Graphene nanogrids fabricated by graphene nanoribbons obtained through oxidative unzipping of multi-walled carbon nanotubes, used as two-dimensional selective templates for accelerated differentiation of human mesenchymal stem cells (hMSCs), isolated from umbilical cord blood, into osteogenic lineage. The biocompatible and hydrophilic graphene nanogrids showed high actin cytoskeleton proliferations that coinciding with patterns of the nanogrids. The amounts of proliferations found are slightly better than proliferation on hydrophilic graphene oxide (GO) sheets, and significantly higher than non-uniform proliferations on hydrophobic reduced graphene oxide (rGO) sheets and polydimethylsiloxane... 

Knowledge Based Firms are considered to be important for the economic development of a country in regards to both employment growth and innovative activity. The latter is believed to contribute significantly to the increase in productivity and therefore the competitiveness of Iran’s economy. This study contributes to the above literature by investigating the factors that are believed to treat the growth of such firms in Iran. The purpose of this study is to identify functional risks of vital signs monitors via Fault Tree Analysis (FTA) method to use as a guide for manufacturers to identify and control hazards. Therefore, 30 knowledge based firms were selected as sample. Then, based on a... 

One atom thick layer of pure carbon in bonded and hexagonal lattice is named graphene. graphene has unique mechanical, optical, thermal and electrical properties and because of these properties has grabbed attention. graphene has been made from high pure graphite by different methods such as CVD(chemical vapor deposition) , chemical exfoliation , micromechanical cleavage and colloidal suspension. through these methods, green methods for synthesis of graphene, using eco-friendly reductants during synthesis of graphene instead of hydrazine and recently using waste(not graphite) are attractive for synthesis of graphene. Following this idea , a group has produced graphene from wastes such as... 

Graphene is a two dimensional lattice which is created from carbon atoms. Having special feature, it has such various medical usage, for example in diagnosing and treating cancer. Adding a particular factor to graphene could improve their efficiency. In comparis on with graphene itself, graphene oxide and reduced graphene oxide are much more successful in diagnosing and treating than others because of their higher hygroscopic. Recent studies state that hydrogenized combinations including hydrogenized graphene show desired results. Due to its higher hygroscopic and the possibility of adherence to the cells, hydrogenized graphene could be very effective in diagnosing and treating the sarcomas.... 

This study discusses about mass customization and optimization of supply network in which both goal considering to set the flow of raw material and final product to satisfy the customer demand. The mass customization is more important concept in this study, so that this goal is placed to the first objective. In this research, the model which contained both goal is presented. The model focus on mass customization and try to satisfy various products demand, which constitute 3 kind of speed demands. Each product can satisfy in 3 way: fast, normal, slow.In the first model the new approach present in which the speed affects all of supplying, manufacturing and distributing system. The system try... 

Graphene oxide is a single sheet of Carbon atoms which has been arranged on a two-dimensional honeycomb lattice. Functional groups such as epoxy, carboxyl and carbonyl are located on basal plane and at the edges of graphene oxide and they localize electrons on the surface of graphene oxide and open band gap in its band structure. Pure graphene has zero band gap, so existence of fluorescence properties is unlikely; but graphene oxide has fluorescence properties due to band gap in its band structure. Fluorescence properties of graphene have been used in live cell imaging and drug delivery, so study and increasing of fluorescence properties is significantly important. The purpose of this... 

The Internet is often used for communication-based applications such as online banking, stock trading, and shopping where service interruption is unacceptable. Thus, analysis of the impact of the failures of hardware, software, and related services’ performance quality of the service provided to users is of importance to designers and managers in these functions. In this study, we developed a strategy to the design of a dynamic combination of file servers with the aim of providing reliability and SLA. At first, we examine the reasons for the violation of service level in file host services and datacenters, and then we introduce the criteria to measure the violation of service level on the... 

Nowadays, too much attention has been paid to Solid Oxide Fuel Cells (SOFC). One of the key components in SOFC is interconnect which plays an important role in SOFC performance. Interconnect can be either a metallic or ceramic layer that sits between each individual cell. The reduction in operating temperature of SOFC resulted in interests in using metallic interconnectors. However, the oxidation of these metallic materials is big challenge. Chromium (Cr), Nickel (Ni) and Iron (Fe) alloys have been employed to overcome this deficiency. However, these alloys bring another difficulty which is the presence of active elements such as Cr which reduces the performance of interconnects by forming... 

In this thesis, Silicon nanowires were synthesized using carbothermal method via Vapor-Liquid-Solid mechanism catalyzed by gold nanoparticles deposited on various substrates. Silicon nanowires just grew on (100) and (111)-oriented silicon substrates. For a particular set of process parameters, we observed a critical thickness of the nucleating gold film, that had depened on a kind of various substrates. We studied the dependence of the Au-Si alloy droplet size and size distribution on the starting gold film thickness and the annealing conditions. We used a modified heating sequence that deconvoluted the effect of various substrates consumption and gas-phase silicon supply on the Au-Si alloy... 

In this study, leaching of Sarcheshmeh Reverberatory Furnace Dust was investigated in the H2SO4-O3 media. Response surface methodology based on central composite face-centered design (RSM-CCF), was applied to optimize the operating parameters. The optimum conditions to obtain the main goal of maximum copper and minimum iron dissolution from dust were identified to be temperature of 30˚C, leaching time of 3hr, initial pH of 0.5, pulp density of 20% and ozone flow rate of 1g/h. The copper and iron concentrations of leaching solution were found to be 27.11 and 0.89983 g/L under the optimum conditions, respectively. The results showed that selective copper extraction from the dust could be...