Sharif Digital Repository

Theoretical and numerical analyses of rotating disks with non-uniform thickness and material properties subjected to thermo-mechanical loadings have been carried out by variable material properties (VMP), Runge-Kutta's (RK) and finite element (FE) methods. The material is assumed to be elastic-linear hardening. A power form function is used to describe the temperature gradient with the higher temperature at outer surface. Von-Mises theory has been used as failure criterion. The effects of geometry, material and thermal loading parameters as well as boundary conditions on radial, hoop and equivalent stress distributions which have not been studied in much detail in previous works have been... 

In this paper, distributions of stress and strain components of rotating disks with non-uniform thickness and material properties subjected to thermo-elastic loading under different boundary conditions are obtained by semi-exact methods of Liao's homotopy analysis method (HAM), Adomian's decomposition method and He's variational iteration method (VIM). The materials are assumed to be perfectly elastic and isotropic. A two dimensional plane stress analysis is used. The distribution of temperature over the disk radius is assumed to have power forms with the higher temperature at the outer surface. The results of the three methods are compared with those obtained by Runge-Kutta's numerical... 

This article presents a multi-standard transmitter based on the eight-path architecture with a fully digital baseband (BB) input, covering the frequency band from 300 MHz to 1.5 GHz, while all harmonics and the distortion product of C-IMD3 are rejected to better than -40 dBc. The proposed architecture is based on the multipath technique in which the amplitude weighting algorithm is implemented in the digital domain. The fully digital input baseband section of the architecture eliminates the need for power-consuming circuit modules, such as mixers, high-frequency filters, and amplifiers, thus simplifying the required circuitry and improving the overall performance in terms of the operating... 

In this paper, distributions of stress and strain components of rotating disks with non-uniform thickness and material properties subjected to thermo-elasto-plastic loading are obtained by semi-exact method of Liao's homotopy analysis method (HAM) and finite element method (FEM). The materials are assumed to be elastic-linear strain hardening and isotropic. The analysis of rotating disk is based on Von Mises' yield criterion. A two dimensional plane stress analysis is used. The distribution of temperature is assumed to have power forms with the hotter point located at the outer surface of the disk. A mathematical technique of transformation has been proposed to solve the homotopy equations... 

Web search engines play a significant role in answering users’ information needs based on the huge amount of data available on the internet. Although evaluating the performance of these systems is very important for their improvement, there is no comprehensive, unbiased, low-cost, and reusable method for this purpose. Previous works used a small and limited set of queries for their evaluation process that restricts the assessment domain. Moreover, these methods mainly rely on human evaluators for manual assessment of search engines which makes the results of the evaluation subjective to the opinion of human evaluators and also prone to error. In addition, repeating the evaluation would be a... 

Graphene oxide nanoplatelets (GONPs) with extremely sharp edges (lateral dimensions ∼20-200 nm and thicknesses <2 nm) were applied in extraction of the overexpressed guanine synthesized in the cytoplasm of leukemia cells. The blood serums containing the extracted guanine were used in differential pulse voltammetry (DPV) with reduced graphene oxide nanowall (rGONW) electrodes to develop fast and ultra-sensitive electrochemical detection of leukemia cells at leukemia fractions (LFs) of ∼10-11 (as the lower detection limit). The stability of the DPV signals obtained by oxidation of the extracted guanine on the rGONWs was studied after 20 cycles. Without the guanine extraction, the DPV peaks... 

In this study, two moving-bed biofilm reactors (MBBR1 and MBBR2) filled with different size of carrier media (Kaldnes K1 and Kaldnes K1 micro, respectively) were subjected to soluble (sugar and sodium acetate (Ac)) substrate and mixture of soluble and particulate (particulate potato starch (PS)) substrate in a very high organic loading rate (12 kgCOD/m3·d) at different temperatures (26 and 15°C, in MBBR1 and MBBR2, respectively). The effects of carrier type and substrate on biofilm structure and reactor performance have been studied. Starch was removed by adsorption at the biofilm surface and hydrolyzed which caused substrate gradient in MBBR1, however, hydrolyzed uniformly within biofilm in... 

The effects of zinc content (2 and 4 wt%), heat treatment (solution-Treated and T6), as well as hot deformation (extrusion and multi-directional forging (MDF)) on the microstructure, mechanical and degradation behavior of Mg-Zn alloys were studied. As the result of microstructure refinement, solid solution and precipitate strengthening (formation of MgZn second phases), the strength of pure Mg was increased after Zn addition. Solution treatment of the Mg-4Zn alloy resulted in 16% softening due to the dissolution of the MgZn second phases and also grain growth, while aging treatment increased the strength value by 8% in comparison to the as-cast material because of the formation of the fine... 

Ensemble Kalman filter, EnKF, as a Monte Carlo sequential data assimilation method has emerged promisingly for subsurface media characterization during past decade. Due to high computational cost of large ensemble size, EnKF is limited to small ensemble set in practice. This results in appearance of spurious correlation in covariance structure leading to incorrect or probable divergence of updated realizations. In this paper, a universal/adaptive thresholding method is presented to remove and/or mitigate spurious correlation problem in the forecast covariance matrix. This method is, then, extended to regularize Kalman gain directly. Four different thresholding functions have been considered... 

In this paper, for the first time, current distribution inside multiwall carbon nanotube (MWCNT) bundles is studied in the high frequency range in which resistance becomes saturated. It is shown that current distribution of MWCNT bundles in this range is not strictly decreasing vs. distance from surface as in Cu wires  

Multilevel interconnect network of a macrocell for 7.5 nm technology node is designed with carbon based interconnects (CBI) and Cu. Results are compared. Constrains of using CBI is discussed. It is shown that by using CBI power dissipation associated with wires could decrease by 32%. To use GNRs for more than one metal pair, reverse wire pitch idea is proposed that prevents undesirable increase in the number of metal layers  

Closed form model for skin and proximity effect is necessary for GSI interconnects. In this paper, exact formulation for current distribution inside multiwall carbon nanotube (MWCNT) bundles is derived using multiconductor transmission line model. The current distribution is different from copper wires and it is geometry dependent because of kinetic inductance and quantum capacitance. This current distribution is used to compute and formulate high frequency resistance of MWCNT bundles  

In this paper, n-tier methodology is developed to design multilevel interconnect architecture of macrocells using single-wall carbon nanotube (SWCNT) bundles. Upper limit of low-bias voltage of SWCNT bundle interconnects is derived and its dependence on temperature, SWCNTs' diameter, and interconnect length is studied. Possibility of using SWCNT bundles as local interconnects at 7.5-nm technology node is discussed, and it is shown that SWCNT bundles with 1 nm diameter cannot be used at the first interconnect metal level. Using Cu and SWCNT bundles, multilevel interconnect architecture of a 7.5-nm ASIC macrocell is designed which reduces the number of metal levels by 27% and power dissipation... 

Pseudomonas aeoroginosa B-3556 was grown on soy flour based semi-solid media for lipase production. The effect of different factors including medium composition, pH, temperature, mixing intensity and substrate particle size on lipase productivity was analyzed using the Taguchi method in three steps. Based on these analyses the optimum concentrations of soy flour, (NH4)2HPO4, K2HPO4 and MgSO4.7H2O were found be 3%, 3%, 0.5% and 0.21% respectively. Furthermore, optimum values for temperature, pH and the shaking speed were determined as 30°C, 7.1 and 150 rpm. As for the substrate particle size, the best result was achieved when the soy flour had a mesh size cut of 60-70. The influence of the... 

The multistep release of therapeutic agents in the theranostic particulate systems has remained as a challenge in smart drug delivery. In this study, superparamagnetic nanoparticles of Fe3O4 were coated with a blend of F127/F68 grades of pluronic in order to adjust the lower critical solution temperature (LCST) and consequently engineering of the release temperature. Pluronic as a biocompatible thermo-sensitive polymer is frequently used as a self-emulsifying drug delivery system. Magnetite nanoparticles with double layer coating of oleic acid and pluronic F127 have been reported as an on-demand smart carrier for hydrophobic drugs. LCST was examined using differential scanning calorimetry... 

Stars twinkle because their light propagates through the atmosphere. The same phenomenon is expected when the light of remote stars crosses a Galactic - disk or halo - refractive medium such as a molecular cloud. We present the promising results of a test performed with the ESO-NTT, and consider its potential  

The power law logistic model was utilized to investigate the growth of a hydrocarbon assimilating bacterium on a water-insoluble substrate. To achieve this end, population dynamics of Bacillus licheniformis MS3 in a medium containing n-decane as the sole carbon source was monitored for 30 h. Different initial biosurfactant concentrations and shaking rates were employed to examine the role of mass transfer in the cell growth and the consequent hydrocarbon biodegradation. The amount of n-decane degraded in the system was detected by gas chromatography at the end of the incubation period. The results revealed that when mass transfer limitations were lessened through addition of an initial... 

To obtain potentially applicable microorganisms to an effective in situ microbial enhanced oil recovery operation, bacteria that were compatible with the harsh conditions of a petroleum reservoir were isolated from a crude oil sample. The application of an oil spreading technique showed that all of the isolates were capable of producing biosurfactants from both the glucose and crude oil as carbon sources. The secreted biosurfactants could at least reduce the surface tension 20 mN/m and for one of the isolates; the surface tension value dropped below 40 mN/m. In addition, the contact angle measurements revealed that the produced biosurfactants could effectively alter the wettability of the...