Sharif Digital Repository

In this thesis, we study and analyze the performance of matched and partially-matched re-ceivers for a typical Ultra Wide-band Spectrally-Encoded Spread-Time (SE/ST) CDMA in the presence of multiple tone jammers and a coexisting OFDM system. We investigate a scenario in which there is not any information about the jammer and OFDM subcarrier frequencies in the transmitter side and we try to cancel jammers and interferences at the receiver. For this case, we demonstrate that by using a partially-matched filter at the receiver in an environment with multiple tone jammers and some coexisting systems the performance of the SE/ST system can be improved. We also assume K asynchronous users and... 

People usually use trust and reputation when they encounter uncertainty in the nature. Graphs are good tools to model and analysis of trust’s problems. If we show human and computer agents by graph’s nodes and trust values by its edges, in literature, the output graph is so-called Web of Trust. Most recently, there are three major research areas in which trust is studied. First area is policy-based trust which uses policies, digital signature and authentication methods. Second area is reputation-based trust which uses reputation and social network tools to estimate trust where past interactions or performance for an entity are combined to assess its future behavior. Third area is trust... 

The eight-year Holy Defense , in addition to extensive military experience, yielded significant achievements in engineering and innovation, with one of its key pillars being the Jahad-e Sazandegi War Engineering Research Center, which achieved broad innovations in industrial and engineering fields, including solid-fuel missiles, the Shahid E'temadi project, sonar systems, and the Kheybar Bridge, raising the question under those specific and critical conditions of what processes and frameworks enabled such innovations, a question addressed in this research through a multiple-case study method using existing interviews, books, documents (including images, journals, and administrative... 

In recent years utilization of quantum dots for stem cells detection and clean energy production has received intensive attention. Graphene and its derivatives have been widely studied because of their effectiveness on electronical and optoelectronical devices, chemical sensors, nanocomposites, and energy storage. By use of metal nanoparticles, such as AuNPs, we can develop properties of graphene, and control them via shifting the absorption peak wavelength and increasing its biocompatibility. In this research, hybrid nanoparticles of gold-graphene as core-shell and conjugated by polymeric linkers containing amine or thiol functions are synthesized. Our purpose is stabilization the... 

This thesis presents a comprehensive and rigorous investigation of modern methods for predicting the minimum fluidization velocity (Uₘf) and the voidage at incipient fluidization in binary fluidized beds, with a primary focus on the complexities inherent to biomass particles. The overarching aim is to improve predictive accuracy by synergistically integrating machine learning techniques with refined empirical correlations. The study follows a two stage approach: first, a systematic evaluation of diverse machine learning algorithms is conducted to assess their ability to predict key fluidization parameters with high fidelity; second, the established correlation of Ago et al. is carefully... 

In this study, membrane distillation process was used for treatment of high salinity waters. The focus of this study is to simulate and build a setup of membrane distillation process. Since the membrane distillation process is based on the driving force of the temperature difference, the required temperature is provided by both the use of heaters and the use of solar energy. To increase the feed temperature by solar energy, a black polymer coating on the main membrane is used. The main membrane used in this process is PVDF polymer and the polymer coated on the surface is the PAN polymer. After simulating and constructing the laboratory setup, the influence of a variety of parameters on the... 

FGM sheets with component or grain size gradient in their thickness direction provide mechanical and physical gradient properties through ND direction. FGMs are fabricated by various methods including centrifugal casting, powder metallurgy, PVD and CVD,all of which suffer from some shortcomings such as porosity of the products, low rate and high cost of production and restrictions on mass production. In this study, 2 and 4 layered Al matrix FGM sheets containing SiC and Al2O3 powders were fabricated by laminating method of Accumulative Roll Bonding(ARB). Two approaches of stacking were chosen as accumulative coupled roll bonding (ACRB) and (ASRB) for initial roll bonding and subsequent... 

Particle reinforced aluminum matrix composites have considerable attraction in automotive and aerospace industries due to their special properties as light weight, high ratio of strength/density, improved elastic modulus, low coefficient of thermal expansion and high wear and corrosion resistance. Among the production processes of metal matrix composites, accumulative roll bonding process has particular importance due to producing ultrafine grained composite sheets. However, uncontrolled and undesired agglomeration of particles is the main problem in producing these composites. In this research, the Al2O3 and SiC nanoparticles were electrostatically stabilized against agglomeration by... 

This project examines four alternatives such as pipelines, oil injection wells, LNG & GTL in the purpose of Iran gas utilization. In this Project four strategies using cost/benefit analysis are examined. For this purpose, at first the cost of inlet feed gas per Mmbtu are calculated. Then regarding various scenarios of average world gas prices for the following thirty years, the cost & benefit of any way will be counted. Then with the use of energy security, the project will make energy policy. For this purpose, Shannon indicator will be used as one of the most reliable indicators. Due to the of use this indicator, the popular project will be chosen accordingly as a certain amount of gas the... 

Lipid membranes are fundamental constituents of cell membranes and are now used in lap-on-a-chip technology. Membranes in living cells contain a significant fraction of proteins, which undergo lateral random movements due to thermal fluctuations and shear forces imposed by the solvent fluid. Prominent natural and biotechnological systems where membranes are highly sheared include the plasma membrane of endothelial cells, and membranes used in biosensors for high throughput screening of drug candidates, and in water purification devices. In these systems membrane is in direct contact with the mainstream suspension flow, which is driven by pressure gradients. The efficiency and function of... 

Splitting in ingot cast structures and transverse cracks in continuous cast structures are the main problems of hot rolling of low carbon resulfurized free-cutting (LCRF) steels. Presence of high volume fraction of manganese sulfide inclusions in cast structure increases the risk of alligatoring in hot rolling. Because of high sulfur content of these steels and probability of formation of low melting point phases, minimum level of manganese and maximum level of copper and tin is necessary. Morphology of manganese sulfide is another important factor in hot forming of these steels, which can be controlled by level of deoxidation in steel making. In fact, MnS2 is present in fully killed... 

Based on International Energy Agency studies, achievement of 450 ppm CO2-equivalent emission target in global emission means that the CO2 emissions in 2050 must be reduced to %50 of 2005 level, and this implies that a portfolio of emission reduction policies and strategies need to be exploited through current century.
At the present time, Carbon Capture and Storage (CCS) Technology is a dominant strategy among all the long-term carbon abatement strategies in many countries. Nevertheless, its potential as a climate mitigating option will be proved, only if it is implemented in the countries which are developing at a great pace and taking advantage of fossil fuels in order to afford their... 

Climate change and energy security are key drivers for future energy policy. While energy security has been a pillar of energy policy for about a century, concern about climate change is more recent and is bound to radically change the landscape of energy policy. Policy makers are now under increasing pressure to address these twin challenges: to develop cost-effective policies that will both ensure the security of our energy system and reduce greenhouse gas emissions.
Main Effort in this Project is to construct an integrated model of Iran’s energy system to serve as a policy analysis tool, by which policymakers are able to identify the future effects of a wide range of policies in... 

Dependence of some magnetic properties such as core loss and permeability on temper rolling was studied in this thesis. It is shown that with a proper temper rolling sharper textures are obtained in the electrical steel and the magnetic properties in the longitudinal and traverse directions are improved. By texture analysis, it is shown that because of temper rolling, shear strain on the surface of the sheet is the main factor for abnormal grain growth and shear texture formation on the surface. The result of formation of this texture is enhancement of the {100} intensity and reduction of the {111} intensity, leading to the improvement of the permeability. Temper rolling is always... 

Distributed generation (DG) and its utilization have some benefits and risks for its owner and power network. From owner perspective, benefits of DG include selling energy, reducing costs related to fuel, and other economic benefits. However, there are some risk factors for the owner including risk of supplying fuel, risk of selling generated power, and other risk factors related to establishment of the DG unit. Utilizing risk-reduction tools such as signing agreements for selling power, purchasing fuel, and related economic tools are necessary for risk management of the owners of DG units. The purpose of this thesis is to investigate the economic situation of the DG units and optimize the... 

In software programs, most of the time, there is a chance of error, even though they are tested carefully. Finding error-related pieces of code is one of the most complicated tasks and it can make incorrect results if done manually. Semi-automated and fully-automated methods have been introduced to overcome this issue. The rapid growth of developing smart mobile applications (SMAs) in recent years, competition among the development teams and many other factors have increased the chance of errors and hence, the quality of these applications have reduced. There are two approaches to test SMAs in order to reach a high degree of quality: (1) using existing traditional methods and adapting them...