Loading...
Search for:
ahari--r--m
0.143 seconds
Total 23971 records
Radiation Effects on Geodesics in de Sitter Space: A Classical Approach
, Article International Journal of Theoretical Physics ; Volume 51, Issue 6 , 2012 , Pages 1938-1945 ; 00207748 (ISSN) ; Tanhayi Ahari, M ; Tanhayi, M. R ; Tavakoli, F ; Sharif University of Technology
2012
Abstract
In this work we first obtain a trajectory of a freely falling charged particle in de Sitter space and then in the classical approach, the effect of electromagnetic self-force on particle's trajectory has been considered. Finally, some limits for the problem have been presented
A hybrid approach based on locally linear neuro-fuzzy modeling and TOPSIS to determine the quality grade of gas well-drilling projects
, Article Journal of Petroleum Science and Engineering ; Vol. 114 , 2014 , pp. 99-106 ; ISSN: 09204105 ; Niaki, S.T. A ; Sharif University of Technology
2014
Abstract
Evaluation of a project and its contractors has considerable importance in gas well-drilling projects due to their high investments and worth. In this paper, the quality of some gas well-drilling projects is analyzed in order to evaluate and grade project tasks. A neuro-fuzzy network is utilized to learn the grading process and generate models. To select among these models, a ranking method, namely technique for order of preference by similarity to ideal solution (TOPSIS) is employed. During seven gas well-drilling projects, 77 tasks are studied based on quality practitioners[U+05F3] points of view. After generating the primary models, three indices namely, root mean square error (RMSE),...
Emerging non-volatile memory technologies for future low power reconfigurable systems
, Article 9th International Symposium on Reconfigurable and Communication-Centric Systems-on-Chip, ReCoSoC ; 26-28 May , 2014 , pp. 1-2 ; 9781479958108 ; Asadi, H ; Tahoori, M. B ; Sharif University of Technology
2014
Abstract
Non-volatile memory (NVM) technologies are promising alternatives to traditional CMOS memory technologies. While NVMs were primarily studied to be used in the memory hierarchy, they can also provide benefits in reconfigurable systems such as Field-Programmable Gate Arrays (FPGAs). In this paper, we investigate the applicability of different NVM technologies for the configuration bits of FPGAs and propose a power-efficient reconfigurable architecture based on Phase Change Memory (PCM). Quantitative analysis for various FPGA architectures using different memory technologies shows the benefits of the proposed scheme
A Reconfigurable Architecture Using Non-voltatile Memories
, M.Sc. Thesis Sharif University of Technology ; Asadi, Hossein (Supervisor)
Abstract
In recent years, emerging Non-Volatile Memories (NVMs) have become promising alternatives for existing memory technologies. Due to shortcomings of SRAM memory in nanometer era,NVMs such as Phase-Change Memory (PCM) can be used in configuration memories of Field-Programmable Gate Arrays (FPGAs). Despite prominent features of emerging NVMs, they suffer from high write-power, high write-latency, and limited number of reliable write opera-tions. In addition, a dedicated Peripheral Circuit (PC) which is required to convert the NVM state to the equivalent voltage level can impose significant area and power overheads to FPGAs.In this thesis, a reliable power-efficient hybrid architecture employing...
A power-efficient reconfigurable architecture using PCM configuration technology
, Article Proceedings -Design, Automation and Test in Europe, DATE ; 2014 ; Asadi, H ; Khaleghi, B ; Tahoori, M. B ; Sharif University of Technology
2014
Abstract
Promising advantages offered by resistive NonVolatile Memories (NVMs) have brought great attention to replace existing volatile memory technologies. While NVMs were primarily studied to be used in the memory hierarchy, they can also provide benefits in Field-Programmable Gate Arrays (FPGAs). One major limitation of employing NVMs in FPGAs is significant power and area overheads imposed by the Peripheral Circuitry (PC) of NVM configuration bits. In this paper, we investigate the applicability of different NVM technologies for configuration bits of FPGAs and propose a power-efficient reconfigurable architecture based on Phase Change Memory (PCM). The proposed PCM-based architecture has been...
Towards dark silicon era in FPGAs using complementary hard logic design
, Article Conference Digest - 24th International Conference on Field Programmable Logic and Applications, FPL 2014 ; Sept , 2014 , pp. 1 - 6 ; ISBN: 9783000446450 ; Khaleghi, B ; Ebrahimi, Z ; Asadi, H ; Tahoori, M. B ; Sharif University of Technology
2014
Abstract
While the transistor density continues to grow exponentially in Field-Programmable Gate Arrays (FPGAs), the increased leakage current of CMOS transistors act as a power wall for the aggressive integration of transistors in a single die. One recently trend to alleviate the power wall in FPGAs is to turn off inactive regions of the silicon die, referred to as dark silicon. This paper presents a reconfigurable architecture to enable effective fine-grained power gating of unused Logic Blocks (LBs) in FPGAs. In the proposed architecture, the traditional soft logic is replaced with Mega Cells (MCs), each consists of a set of complementary Generic Reconfigurable Hard Logic (GRHL) and a conventional...
Spray characteristics and atomization behavior of bio-diesel (Norouzak) and diesel fuel blends
, Article Particulate Science and Technology ; 2016 , Pages 1-12 ; 02726351 (ISSN) ; Jafari, M ; Ahari, M ; Saidi, M. H ; Hajinezhad, A ; Mozaffari, A. A ; Sharif University of Technology
Taylor and Francis Inc
2016
Abstract
Norouzak oil seeds that are the source of bio-diesel (Norouzak) fuel grow mostly in Gonabad and Kashmar located in Khorasan, north east of Iran. Spray characteristics of Norouzak bio-diesel have been experimentally and theoretically studied in this work. Norouzak fuel is added to the conventional diesel fuel, and mixture formations of several blends have been investigated and compared with each other. Moreover, by varying ambient and injection conditions, behaviors of spray of different blends have been explored. Microscopic and macroscopic properties of spray such as Sauter Mean Diameter (SMD), Ohnesorge number, spray tip penetration, spray cone angle, spray projected area and volume have...
Spray characteristics and atomization behavior of bio-diesel (Norouzak) and diesel fuel blends
, Article Particulate Science and Technology ; Volume 36, Issue 3 , 2018 , Pages 270-281 ; 02726351 (ISSN) ; Jafari, M ; Ahari, M ; Saidi, M. H ; Hajinezhad, A ; Mozaffari, A. A ; Sharif University of Technology
Taylor and Francis Inc
2018
Abstract
Norouzak oil seeds that are the source of bio-diesel (Norouzak) fuel grow mostly in Gonabad and Kashmar located in Khorasan, north east of Iran. Spray characteristics of Norouzak bio-diesel have been experimentally and theoretically studied in this work. Norouzak fuel is added to the conventional diesel fuel, and mixture formations of several blends have been investigated and compared with each other. Moreover, by varying ambient and injection conditions, behaviors of spray of different blends have been explored. Microscopic and macroscopic properties of spray such as Sauter Mean Diameter (SMD), Ohnesorge number, spray tip penetration, spray cone angle, spray projected area and volume have...
Experimental and theoretical investigations on spray characteristics of bio-ethanol blends using a direct injection system
, Article Scientia Iranica ; Volume 24, Issue 1 , 2017 , Pages 237-248 ; 10263098 (ISSN) ; Jafari, M ; Ahari, M ; Saidi, M. H ; Hajinezhad, A ; Mozafari, A. A ; Sharif University of Technology
Sharif University of Technology
2017
Abstract
In the present work, the spray characteristics of bio-ethanol and its blends have been experimentally and theoretically investigated. To have a comprehensive study, the effects of ambient condition and injection pressure on the spray of different blends have been considered. Macroscopic and microscopic characteristics of spray such as tip penetration length, cone angle, projected area, volume, Sauter Mean Diameter (SMD), and Ohnesorge number are investigated precisely. Besides, air entrainment and atomization analyses have been carried out to improve mixture formation process. Using curve fitting and least squares method, theoretical correlations have been suggested in such a way to predict...
Solvability of 2-D Models of Statistical Mechanics and its Relation to Discretely Holomorphic Parafermions at Critical Points
, M.Sc. Thesis Sharif University of Technology ; Rouhani, Shahin (Supervisor)
Abstract
Discretely holomorphic observables have recently been proposed for two dimensional lattice models at criticality, whose correlation functions satisfy a discrete version of Cauchy-Riemann relations. Existence of these observables appears to have a deep relation with integrability of the model. On the other hand at critical points of these models, there exist entities known as discrete parafermions whose Boltzmann weights satisfy the Yang-Baxter Equations. For this reason, finding parafermionic observables in any lattice model is equivalent to proof of solvability. This thesis is a step towards understanding the relation between Parafermions and Solvability. For instance, the Boltzmann weights...
Evaluation of Blockchain Technology in a Supply Chain with Multi-Criteria Decision Making (MCDM)
, M.Sc. Thesis Sharif University of Technology ; Haji, Alireza (Supervisor)
Abstract
Today, blockchain technology has attracted the attention of many traditional supply chains.The implementation of blockchain in the automotive industry supply chain can enhance data security, privacy, anonymity, traceability, accountability, integrity, robustness, transparency, reliability, and authentication. The number of blockchain platforms in the market is rapidly growing, but choosing the appropriate platform is a strategic and critical decision that requires the evaluation and selection of right criteria at first. Therefore, this research aims to assess blockchain technology in a supply chain using a multi-criteria decision-making approach. This study is a new approach to identify the...
Predicting survival of Iranian COVID-19 patients infected by various variants including omicron from CT Scan images and clinical data using deep neural networks
, Article Heliyon ; Volume 9, Issue 11 , 2023 ; 24058440 (ISSN) ; Hamidi, M ; Ghavami Modegh, R ; Aziz Ahari, A ; Heydari, N ; Tavafizadeh, Z ; Pournik, O ; Emdadi, S ; Samimi, S ; Mohseni, A ; Khaleghi, M ; Dashti, H ; Rabiee, H. R ; Sharif University of Technology
Elsevier Ltd
2023
Abstract
Purpose: The rapid spread of the COVID-19 omicron variant virus has resulted in an overload of hospitals around the globe. As a result, many patients are deprived of hospital facilities, increasing mortality rates. Therefore, mortality rates can be reduced by efficiently assigning facilities to higher-risk patients. Therefore, it is crucial to estimate patients' survival probability based on their conditions at the time of admission so that the minimum required facilities can be provided, allowing more opportunities to be available for those who need them. Although radiologic findings in chest computerized tomography scans show various patterns, considering the individual risk factors and...
, M.Sc. Thesis Sharif University of Technology ; Eshghi, Koorosh (Supervisor)
Abstract
The focus of this research is to present a model to verify the acceptance of projects with time and cost dependency on the usage of equipments. Decision on these projects is based on a dynamic programming in which at each stage, the profit of available projects in this stage, equipment value and the best choice of future stage are decision keys. In other words, after the completion of a project, it should be decided between doing a project or selling the equipment and leaving the remaining projects. For each projects, there is a product network that includes projects jobs and operations. After accepting projects, equipments of the projects will not be renewed and the usage of the equipments...
Multi-Objective Optimization in Cost, Time and Quality Trade-off in Projects with Quality Obtained by Locally Linear Neuro Fuzzy Networks Case Study: Well Drilling Projects
, Ph.D. Dissertation Sharif University of Technology ; Akhavan Niaki, Taghi (Supervisor)
Abstract
A common decision in project management is the selection of contractors to simultaneously optimize three objectives of the project’s triangle. This issue becomes more important if there is more monetary value involved or there is limited number of capable contractors. In project planning, there is numerous choices for tasks; each with specific time, cost and quality. There is no trade-off problem, if one of the choices has the best time, cost, and quality, simultaneously. However, as these criteria do not generally work in a unique direction, it makes the selection decision difficult. A contractor who performs the projects on time may have higher cost and lower quality. Given that there is a...
Vibrational Analysis of Carbon Nanoscroll tubes
, M.Sc. Thesis Sharif University of Technology ; Ahmadian, Mohammad Taghi (Supervisor) ; Assempour, Ahmad (Supervisor)
Abstract
In recent year carbon nanostructures (CNS) has been the pinnacle of academic and industrial research. After development and refinement of better methods of controlled fabrication of high-quality CNS, these structures started substituting nanotubes in their renowned applications including nanochannels and nanocarriers. Due to the tunable core size of CNS using electric fields, they can be used as controlled ion channels and nanocarriers with controlled drug release as well as more dynamics oriented applications including nano-oscillators, nano-actuators and artificial muscle tissue. However lack of vibrational studies on CNS has hindered researchers in this path. In this thesis vibrational...
Analysis of porosity distribution of large-scale porous media and their reconstruction by Langevin equation
, Article Physical Review E - Statistical, Nonlinear, and Soft Matter Physics ; Volume 83, Issue 2 , February , 2011 ; 15393755 (ISSN) ; Sahimi, M ; Rasaei, M. R ; Tabar, M. R. R ; Sharif University of Technology
2011
Abstract
Several methods have been developed in the past for analyzing the porosity and other types of well logs for large-scale porous media, such as oil reservoirs, as well as their permeability distributions. We developed a method for analyzing the porosity logs φ(h) (where h is the depth) and similar data that are often nonstationary stochastic series. In this method one first generates a new stationary series based on the original data, and then analyzes the resulting series. It is shown that the series based on the successive increments of the log y(h)=φ(h+δh)-φ(h) is a stationary and Markov process, characterized by a Markov length scale hM. The coefficients of the Kramers-Moyal expansion for...
Attacks on a lightweight mutual authentication protocol under EPC C-1 G-2 standard
, Article Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 1 June 2011 through 3 June 2011 ; Volume 6633 LNCS , June , 2011 , Pages 254-263 ; 03029743 (ISSN) ; 9783642210396 (ISBN) ; Alagheband, M. R ; Aref, M. R ; Sharif University of Technology
2011
Abstract
Yeh et al. have recently proposed a mutual authentication protocol based on EPC Class-1 Gen.-2 standard. They claim their protocol is secure against adversarial attacks and also provides forward secrecy. In this paper we show that the proposed protocol does not have cited security features properly. A powerful and practical attack is presented on this protocol whereby the whole security of the protocol is broken. Furthermore, Yeh et al.'s protocol does not assure the untraceabilitiy and backwarduntraceabilitiy attributes. We also will propose our revision to safeguard the Yeh et al.'s protocol against cited attacks
Time-Sharing improves dynamic index coding delay
, Article 2019 Iran Workshop on Communication and Information Theory, IWCIT 2019, 24 April 2019 through 25 April 2019 ; 2019 ; 9781728105840 (ISBN) ; Mojahedian, M. M ; Aref, M. R ; Pakravan, M. R ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2019
Abstract
In this paper, we show how time-sharing method may reduce transmission delay in the dynamic index coding scenario. We propose a novel time-shared dynamic index coding transmission scheme that achieves the maximum index coding gain for a complete bi-directional side information graph and formulate a constrained optimization problem to tune the transmission scheme for the minimum transmission delay. A closed-form solution is presented for the special case of two-user. We also use analytical and simulation results to provide graphical intuition for the obtained results
Strategies for Optimal Transmission and Delay Reduction in Dynamic Index Coding Problem
, Article IEEE Transactions on Communications ; Volume 71, Issue 8 , 2023 , Pages 4694-4706 ; 00906778 (ISSN) ; Mojahedian, M. M ; Aref, M. R ; Pakravan, M. R ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2023
Abstract
Dynamic index coding is a practical generalization of conventional index coding that deals with real dynamic traffic streams. We identify the code-constrained capacity region of a dynamic index coding problem with a complete bi-directional side information graph and introduce the performance metric of dynamic index coding gain to measure how dynamic index coding reduces the required data transmissions. A greedy dynamic index coding scheme is proposed that achieves the maximum coding gain almost everywhere in the identified capacity region. Although the greedy scheme attains the maximum coding gain, its selfish nature may unacceptably increase transmission delay. To address this issue, a...
Efficiency improvement of a high step up high efficiency converter for photovoltaic applications based on three-state switching cell
, Article PEDSTC 2013 - 4th Annual International Power Electronics, Drive Systems and Technologies Conference ; 2013 , Pages 454-458 ; 9781467344845 (ISBN) ; Zolghadri, M. R ; Hajimoradi, M. R ; Sharif University of Technology
2013
Abstract
This paper suggests methods for improving efficiency of a high step up high efficiency converter based on three state commutation cells. A loss analysis has been performed to identify the source of power loss. Based on this analysis, methods are presented to reduce losses in the most power dissipating elements. These methods include replacing some power diodes with large conduction losses with MOSFETs having small on-state resistance. Efficiency improvement up to %1.25 percent is verified in simulation and experimental results