Sharif Digital Repository

An experimental investigation of unsteady boundary layer over a wind turbine blade conducted in a subsonic wind tunnel. The experiment performed at different positions along the airfoil chord. Model was oscillated with amplitude of ±5 cm. Reynolds number, based on airfoil chord, ranged 3˟105 upto 6.5˟105 and the reduced frequency ranged from 0.0055 to 0.0981. Velocity profile measured with a total pressure rake. The data were reduced via a low-pass filter. Increasing the reduced frequency, the velocity profile increases the level on turbulence fluctuation and becomes more attached to the surface.

 

Among various methods for purifying water from dyes, adsorption takes advantage of simplicity, high efficiency, no secondary-pollution, and inexpensiveness. In this project Halloysite nanoparticles were applied to prepare a series of modified polyAcrylamide- quince seed gum hydrogels (QS/PAAm/Haln). The obtained hydrogels demonstrated improved efficiency as adsorbent in removing methylene blue (MB) from aqueous media. The structure of the prepared hydrogel nanocomposites were identified by X-ray diffraction, Brunauer-Emmett-Teller surface area analysis, Fourier-transform infrared spectroscopy, scanning electron microscope and energy-dispersive X-ray spectroscopy. Kinetics, thermodynamic,... 

3D electrohydrodynamic printer fabricating structure and parts with micron accuracy and resolution is new technology of additional manufacturing. In this method, powerful electric field at the tip of the nozzle can change the shape of the droplet printing and can reduce droplet diameter multiple less than nozzle diameter. Couple equation such as two phase flow, gauss,the effect of various parameter like mechanical and electrical fluid properties, electric field intensity, and folw rate complicate system identification and printer controlling. While the advantages (high speed and resolution, flexibility) of e-jet printing over other fabrication methods are abundant, precise control of the... 

Nowadays energy consumption becomes an important design factor in communication systems because of financial reasons and environmental concerns. There would be many equipments with large energy consumption in next generation (5G) networks, so energy efficiency will play an important rule in these networks. Two alternative techniques used for energy consumption management are energy harvesting and simultaneous wireless information and power transfer (SWIPT). A useful scenario in SWIPT is to use received energy for future transmissions. In this scenario, the design of encoder and decoder is a new open problem, because of the memory now appeared in the system. Thus to understand the interplay... 

Experimental identification (EI) of aircraft static and dynamic characteristics is usually performed for design process verification, its compliance against the existing regulations as well as to extraction of its exact stability and performance characteristics. EI is mostly performed via flight and/or wind tunnel testing of a scaled model of the aircraft under scrutiny. In this regard, the purpose of this thesis is design and development of a 5DoF Table Top Platform (TTP) for Aircraft transfer function identifications as well as some of its key derivatives. The proposed TTP can also function as the motion part of a miniature simulator. The PPT is designed in two parts that is comprised of... 

Natural language processing has been used in solving the problems of humanities, including linguistics and analysis of religious books, such as the Bible, the Torah, and the Quran. One of the challenges in this field is the analysis of issues using the Quran. The problem in this issue is that a person becomes prejudiced in order to analyze the issues and makes incorrect judgements either inadvertently or intentionally based on his/her intellectual background. The same applies to analysis of issues based on the Quran. The method of analysis in this research is to produce an Arabic text based on the language of the Quran by receiving subjects in Persian. In order to achieve this goal, three... 

Alpha amylase enzyme is one of the most important enzymes used in a wide range of industries. The enzyme is used in industries such as detergents, food, pharmaceuticals, paper making and textile. Various national and international articles have been published on this enzyme that focused on specific targets. Despite the extensive studies carried out in this area inside the country, there is still no industrial production of alpha amylase and other enzymes in our country. In the view of the fundamental problem of the lack of industrialization of these studies, in addition to the lack of a riskier investor, it seems that there is a lack of industrial vision in these studies.In this study, the... 

First by reviewing some built micropumps, the importance of rotary magnetohydrodynamic micropump has been highlighted. Then some information about the performance and rules applied to these specific micropumps has been provided. Based on the research, the necessity of using transient flow relations for analyzing the procedure of these micropumps would become crucial. The next step would be extracting the information out of dimensionlessrelations of magnetohydrodynamic theory and dimension less equations of momentum in transientsingle-phase fluid flow which is moved by theoverall Lorentzforce in between 2 parallel surfaces. It would be done in two state of using constantcurrent source and... 

Natural boron includes two stable isotopes 10B and 11B with 19.3 and 80.7 weight percent respectivley.10B isotope has a high thermal neutron absorption cross section. So isotope 10B material is suitable for making atomic reactor control rods. Other and even more important applications of 10B are in disclosing neutrons in order to measure neutron reactors fluxes and also are in nuclear physics laboratories and medical radiation. This isotope also is used in the pharmaceutical and the military industries. There are several methods for separating boron isotopes. Among the distillation methods, thermal diffusion of BF3, distillation of BF3, distillation of methyl borate, boric acid distillation... 

High-quality online services demand reliable and fast packet delivery at the network layer. However, clear evidence documents the existence of compromised routers in the ISP and enterprise networks, threatening network availability and reliability. A compromised router can stealthily drop, modify, inject, or delay packets in the forwarding path to launch Denial-of-Service, surveillance, man-in-the-middle attacks, etc. So researches tried to create intrusion detection methods to identify adversarial routers and switches. To this end, data-plane fault localization (FL) aims to identify faulty links and is an effective means of achieving high network availability. FL protocols use... 

A single-degree-of-freedom model is considered for flexible exercise bars based on the lumped-element approach. By considering the side segment of a flexible exercise bar as a cantilever beam with an equivalent mass at the free end, its free-vibration response and forced one under excitation of the grip of the flexible bar is written parametrically. Some experiments are performed on a specific flexible bar to obtain numerical values for the parameters in the model to have it quantitatively known. In the next step, simulation of the model results in the response of the flexible bar under a considered excitation. The response is imported into a multi-segment musculoskeletal software, AnyBody,... 

Confining nematic liquid crystal between two curved boundary conditions while the nematic molecules have a degenerate planar anchoring leads to complex and beautiful textures of molecular disparagement(defect) in the bulk and on the surfaces. Such the liquid crystal shells are made with double-emulsion techniques in microfluidic devices have provided applications for micro-scale colloidal linkers.In this work, we have numerically minimized the elastic energy in one-constant approximation in present of Fournier’s degenerate surface potential with finite element method. The nematic shell is confined between two spherical surfaces that we have studied the final energies and their related... 

A liquid crystal is a state of matter composed of highly anisotropic building blocks. When liquid crystals are exposed to surfaces with given shapes and anchoring conditions, the orientation of their molecules gets spatially disordered and topological defects may form in the system. The interplay between liquid crystals and the geometry and topology of the colloidal particles has motivated extensive recent studies.In this thesis, we present the numerical modeling results for two faceted colloidal particles in a thermotropic nematic liquid crystal. To obtain the equilibrium nematic field with a finiteelement method, we numerically minimize the free energy of the system that based on the... 

Providing high bandwidth network infrastructures for ever increasing need of data transport is of great importance. The underling infrastructure for many communication services such as GSM/3G/4G mobile networks and Internet services is Synchronous Digital Hierarchy (SDH) optical transport systems. SDH are standardized protocols that multiplex multiple lower rate digital bit streams, such as E1 and Ethernet, and transfer them synchronously over optical fiber using lasers or LEDs. In addition to high data transfer rates, flexible network management and protection mechanisms have great importance, hence are part of SDH standards. In order to obtain flexible network architecture and protected... 

Development of Smart Grid and deployment of smart meters in large scale has raised a lot of concerns regarding customers’ privacy. Consequently, several schemes have been proposed to overcome the above mentioned issue. These schemes mainly rely on data aggregation as a method of protecting users’ privacy from the grid operators. However, the main problem with most of these schemes is the fact that they require a large amount of processing power at the meter side. This, together with the fact that smart meters don’t usually have a powerful processor, can cause the unavailability of smart meter data at the required time for operators of the grid, and at the same time disables smart meters from... 

Secure routing is a major key to service maintenance in wireless ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. Wormhole attack is one of the most severe active attacks to mobile ad hoc networks. Noting the resource limitations in such networks, nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a... 

With the increasing tendency of consumers to purchase from online stores and the remarkable growth of this industry in recent years, timely and cost-efficient delivery of goods to the final customer has become one of its major challenges. Accordingly, last-mile delivery has attracted significant attention from both researchers and practitioners. This study addresses a vehicle routing problem that considers customers’ ability to pick up their orders from selected centers and their possible presence at different locations within the planning horizon. This thesis aims to enhance customer satisfaction and reduce distribution costs by employing two innovative vehicle routing approaches. The first...