Sharif Digital Repository

Present study introduces the vertical gap between the blades of a Savonius rotor's blades as a parameter that can enhance performance of the rotor. To provide comprehensive concept about application of gap between blades, two different models were tested in different working conditions and working regimes. The study completed by using R.S.M. turbulence model through ANSYS Fluent commercial software package. Utilization of the method was validated by comparing results of a conventional model with experimental data from one of the references. Results of the study proved that application of a proper gap between blades can improve rotor's moment coefficient by 20 percent; however, the amount of... 

Present study is aimed to investigate the relationship between blade shape of Savonius rotor and its optimum overlap, an important parameter that can improve the rotor's performance superbly. To set a relation between rotor's shape and its overlap, a new parameter called "trailing angle" was introduced in this study and by a novel design method, several models were designed to represent a wide range of trailing angles. The investigation has been carried out by using Reynolds Stress Method (RSM) through ANSYS Fluent commercial software package. The application of the method was validated by comparing the results of a conventional model with experimental data acquired from one of the... 

Medical applications of rapid prototyping have an increasing trend, making the future of RP more and more promising. These applications may include design, development, and manufacture of medical devices and instrumentation, as well as implant design, anatomical modeling, surgical planning, surgical implants, and prosthesis fabrication. This paper provides a new methodology for customized hip prosthesis that could provide high accuracy of femoral canal reconstruction via 3D modeling of prosthesis stem, 3D modeling of prosthesis neck, and facilitating the communication between the designer and surgeon. Combining RP technologies and rapid tooling with this novel custom-made hip prosthesis,... 

In this study, a system of dexamethasone sodium phosphate (DEXP)-loaded chitosan nanoparticles embedded in poly-ε-caprolacton (PCL) and gelatin electrospun nanofiber scaffold was introduced with potential therapeutic application for treatment of the nervous system. Besides anti-inflammatory properties, DEXP act through its glucocorticoid receptors, which are involved in the inhibition of astrocyte proliferation and microglial activation. Bovine serum albumin (BSA) was used to improve the encapsulation efficiency of DEXP within chitosan nanoparticles and to overcome its initial burst release. BSA incorporation within the chitosan nanoparticles increased the encapsulation efficiency of DEXP... 

Human hepatocellular carcinoma (HCC) has been recognized as one of the significant causes of mortality around the globe. In recent years, extensive research has been carried out to find a deep-rooted perception of mechanisms involved in the pathogenesis of the disease to develop novel strategies for compassionate diagnostic and therapeutic tools. In this regard, nanotechnology has presented great opportunities in HCC diagnosis and treatment by selective and specific targeting, and efficient delivery to reach sufficient doses in targeted tumor areas without adverse influences or minimal damage to normal cells. Herein, different Nanomedicine-mediated strategies for HCC therapy are reviewed... 

For the first time since 1940 and presentation of theodorson's theory, distribution of thrust, torque and efficiency along the blade of a counter rotating propeller axial fan was studied with a novel method in this research. A constant chord, constant pitch symmetric fan was investigated with Reynolds Stress Turbulence method in this project and H.E.S. method was utilized to obtain distribution profiles from C.F.D. tests outcome. C.F.D. test results were validated by estimation from Playlic's analytical method. Final results proved ability of H.E.S. method to obtain distribution profiles from C.F.D test results and demonstrated interesting facts about effects of solidity and differences... 

Control of MMA polymerization batch reactor has intensively investigated. The nonlinear and time varying behavior of the system makes its control a challenging task. MPC algorithm is enjoying an increasing application for control of chemical processes. A sequential linearized model based predictive controller based on the DMC algorithm was designed to control the temperature of a batch MMA polymerization reactor. A genetic algorithm (GA) is suggested to optimize the cost function of DMC. The controller performance was studied via simulation. The controller performance in tracking the profile, noise and disturbances rejection is very good  

We have investigated hydrogen sensing properties of electrodeposited Pd clusters on macroporous silicon substrates. Porous layer was prepared by electrochemical etching of p-type silicon (100) wafer in organic electrolyte DMF (dimethylformamide) diluted by HF (%95 Vol. %). The deposition of Pd was carried out by linear voltammetry (LV) technique. This technique was taken for reduction of palladium ions in the potential range from 0.4 V to -1 V vs. SCE, at the scan rate of 20 mV s-1. Some samples were annealed at 300°C for an hour in air to study the effect of heat treatment on their gas sensitivity. Surface structural and chemical properties of the samples were characterised using Scanning... 

Background: Researchers are trying to study the mechanism of neural stem cells (NSCs) differentiation to oligodendrocyte-like cells (OLCs) as well as to enhance the selective differentiation of NSCs to oligodendrocytes. However, the limitation in nerve tissue acces-sibility to isolate the NSCs as well as their differentiation toward oligodendrocytes is still challenging. Purpose: In the present study, a hybrid polycaprolactone (PCL)-gelatin nanofiber scaffold mimicking the native extracellular matrix and axon morphology to direct the differentiation of bone marrow-derived NSCs to OLCs was introduced. Materials and Methods: In order to achieve a sustained release of T3, this factor was... 

Because of their high performance and unique abilities like producing none-rotating wake, Counter Rotating Propellers (C.R.P.) are being used in many advanced propulsion or ventilation systems. But due to complicated design procedure of C.R.P. fans up to now it was not possible to apply the concept in reversible systems. For the first time in this research, a new method presented to design a reversible counter rotating propeller system. This method is based on designing a basic C.R.P. by a reliable edition of blade element theory to achieve maximum performance in main rotating course and then to optimize it in order to have almost same performance in reverse rotating course. After expressing... 

In this paper, we report on a periodic metallo-dielectric structure that supports geometry-induced surface plasmons in the sub-terahertz regime. The proposed structure is made up of a dielectric-coated metallic grating sandwiched by parallel metal plates. Based on the modal analysis of 2D and 3D structures, the impact of a metal cladding and a customized dielectric coating on the dispersion relation and field distribution of the guided surface wave is investigated. It is found that modal field confinement is improved in the presence of a metal cladding without narrowing the operational bandwidth of the waveguide. Moreover, a customized subwavelength-sized dielectric coating based on... 

In this paper, we present a Gaussian to tophat beam shaper (GTBS) based on an all-dielectric metasurface lens for sub terahertz (sub-THz) applications. In order to calculate the required phase profile of the GTBS, we use an analytical procedure based on the geometrical transformation technique. The calculated phase profile is then realized by a silicon (Si) metasurface lens consisting of rectangular-shaped pillars of subwavelength dimensions. Because of large solution domain relative to the operation wavelength, we combined the beam envelope and the finite element methods to simulate the structure with a high precision. By designing an anti-reflection metasurface made up of periodically... 

In this paper, we report on the design, simulation and measurement of a flat-top beam shaper (FBS) lens for a millimeter-wave (mm-wave) antenna coupled source. The beam shaper is designed to transform the pseudo-Gaussian beam of the mm-wave source into a flat-top beam of sharp roll-off at a specific distance in the Fresnel region. Firstly, relying on the geometrical optics principles, we propose an analytical formulation for the design of lens profiles. Next, a simple optimization method based on the full-wave simulation of the lens and the mm-wave antenna is suggested to tune the analytically extracted lens profile. The optimized lens profile is then studied to assess its performance... 

In this paper, we report on a periodic metallo-dielectric structure that supports geometry-induced surface plasmons in the sub-terahertz regime. The proposed structure is made up of a dielectric-coated metallic grating sandwiched by parallel metal plates. Based on the modal analysis of 2D and 3D structures, the impact of a metal cladding and a customized dielectric coating on the dispersion relation and field distribution of the guided surface wave is investigated. It is found that modal field confinement is improved in the presence of a metal cladding without narrowing the operational bandwidth of the waveguide. Moreover, a customized subwavelength-sized dielectric coating based on... 

In this paper, we report on the design, simulation and measurement of a flat-top beam shaper (FBS) lens for a millimeter-wave (mm-wave) antenna coupled source. The beam shaper is designed to transform the pseudo-Gaussian beam of the mm-wave source into a flat-top beam of sharp roll-off at a specific distance in the Fresnel region. Firstly, relying on the geometrical optics principles, we propose an analytical formulation for the design of lens profiles. Next, a simple optimization method based on the full-wave simulation of the lens and the mm-wave antenna is suggested to tune the analytically extracted lens profile. The optimized lens profile is then studied to assess its performance... 

Dielectric gratings (DGs) have recently been introduced as a new platform for guiding dielectric-based geometrically-induced surface plasmons (SPs) called spoof SPs (SSPs). In this paper, we report on the modal analysis of a metal-clad DG waveguide and compare its performance with other counterparts including the dielectric image guide (IG) and the metal grating (MG) waveguide. The proposed DG waveguide is made up of a periodic array of high-resistivity silicon (HR-Si) pillars on a metal plate with a metal cladding at a proper distance above the structure. By modal analysis of 2D and 3D structures, we show that the presence of the metal cladding enhances the modal field confinement without... 

Recently, metasurfaces capable of manipulating the amplitude and the phase of an incident wave in a broad frequency band have been employed for femtosecond optical pulse shaping purposes. In this study, we introduce a phase-only pulse shaper based on an all-dielectric CMOS-compatible polarization-insensitive metasurface, composed of Si nano cylinders sitting on a fused silica substrate. The required phase profile of the metasurface for desired waveforms are calculated using an iterative Fourier transform algorithm, and the performance of the pulse shaper metasurface in implementing the phase masks was assessed using full-wave simulations. Such approach for realizing a...